Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed tuning - where to start  (Read 10016 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Reed tuning - where to start
« on: July 09, 2012, 02:06:58 PM »

I am keen to learn about tuning reeds as part of a long term plan for when I finish work, hopefully in about 10 years! I plan on buying an old box to practice tuning on. What other purchases would I need to make to enable me?

What recommendations can the forum give on how to start learning. I see tons of info online about the theory and text orientated sites about what to do but not much visual stuff. Is there a course I can take in reed tuning or would I be better placed to ask the guy who is tuning one of my boxes now about apprenticing under him (that is, of course, if he would let me!). I am reading the text based sites to get a better appreciation of the principles but I know from experience hands on brings so much more.

Do Hohner have any maintenence courses available. I see some info on tuning harmonicas. Are the principles the same?

I also see software to help with tuning. Is digital software better or does an old fashioned strobe give better results?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Jon Loomes

  • Performer, Recording Engineer, Luthier.
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 115
  • Non plaudite. Pecuniam jacite.
    • www.jonloomes.com
Re: Reed tuning - where to start
« Reply #1 on: July 09, 2012, 03:09:34 PM »

get an old Piano box to start with - loads of reeds. Take the whole thing up a semitone (file the reed tips). Then take it back down to pitch (file the stem of the reed about a third of the way up fom the rivet).  This will ruin the box, but at the end of this you'll know two important things:  how to do it and whether or not you want to.  Software strobe tuners work fine.

Good luck!

Cheers,
J

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed tuning - where to start
« Reply #2 on: July 09, 2012, 05:18:04 PM »

I taught myself to tune with the help of this forum, mainly.  It really is not complicated or difficult and reeds are tough.  I think it would be difficult to ruin a reed.  I have not ruined one so far.  PA reeds are certainly the cheapest source of reeds but Hohner diatonics are available pretty cheaply on Ebay too so if that is your interest I would get yourself a Hohner diatonic in a key that you want and just go for it.  There is a DVD available from Marc Savoy that has a  section on tuning an accordion that is very down to earth.  I think it is called the Gospel Accordion to Marc vol 2.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed tuning - where to start
« Reply #3 on: July 09, 2012, 06:00:23 PM »

Syale, just curious, who is tuning for you now?  Is he tuning for Cajun music or other? 

I also thought Savoy's dvd had a useful section on tuning, especially if you're wanting to tune for Cajun music.  The actual mechanics of tuning is the same for anything, but there are some nuances to each type of music, in addition to taste, that come in to play.

A lot of people use rotary power tools, like a Dremel. I started out with a Dremel, but have switched to files.  I bought some good Swiss files from a gunsmith supply and have since moth balled my Dremel. I feel I get more control with files, they can be faster, a lot less forgiving of slips, and provide a better finish (not sure how much finish matters but it makes me feel better).  This does not apply to cheap local hardware store needle files.

You also need to learn about reed gaps.  No one told me about that when I began, and my first couple seemed to use a lot of air, then I learned that when tuning, you can change the reed gap, making it take a lot more air to start, or, not start at all.  There is a sweet spot with each reed regarding the gap that allows it to start quick and not choke.  I rule of thumb is the thickness of the reed, but that is only a rule of thumb.

You also need to learn about the valves. Valves and reed gaps seem to account for a lot of sound issues.

The whole thing is definitely not rocket science, but there is much more to it than I had first anticipated, but if you don't mind tedious work, it's fun learning.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #4 on: July 09, 2012, 06:21:29 PM »

The whole thing is definitely not rocket science, but there is much more to it than I had first anticipated, but if you don't mind tedious work, it's fun learning.

It may well not be rocket science but there is a whole lot of Black Magic, 100% agree about gaps, valves etc in addition I use a scraper to flatten reeds rather than a file but each to their own.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #5 on: July 09, 2012, 06:38:51 PM »

Tuning for a box I have in at the moment is with a guy called Wienart Grohmann here in Houston. He is tuning for Newfoundland/Quebecois wet tuning. He had another accordion there, which I really enjoyed the sound from, with +6flat -7sharp if I recall correctly. Wienart has been tuning for 45 years and comes recommended from someone local. There is a store in Pasadena but I prefer a recommend from someone else any day. Wienart has told me he isn't fast but I have time! He uses a strobe to get there and ear the rest of the way. Really nice guy as well!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed tuning - where to start
« Reply #6 on: July 09, 2012, 07:32:10 PM »

Tuning for a box I have in at the moment is with a guy called Wienart Grohmann here in Houston. He is tuning for Newfoundland/Quebecois wet tuning. He had another accordion there, which I really enjoyed the sound from, with +6flat -7sharp if I recall correctly. Wienart has been tuning for 45 years and comes recommended from someone local. There is a store in Pasadena but I prefer a recommend from someone else any day. Wienart has told me he isn't fast but I have time! He uses a strobe to get there and ear the rest of the way. Really nice guy as well!

Interesting, didn't know there was a guy in Texas that tuned for other than Cajun or Tejano.  Man if he'd be willing to do a tuning apprenticeship that would be a golden opportunity.  Seems like a decent Polish community around you who may be able to use that guy as well.

I also use a strobe to get a baseline then finish by ear.  I also keep a cheap guitar tuner handy for getting in the ballpark if I don't know the note, or if it's way off.  Got it after I tuned an ancient Hohner for Cory where he handed me a box of reeds to sort out.  Also handy after dropping a set on the ground. 

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Reed tuning - where to start
« Reply #7 on: July 09, 2012, 08:00:29 PM »

IIs there a course I can take in reed tuning

http://www.itemm.fr/  run accordeon tuning courses, among many other things . . . but all taught in French :(
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #8 on: July 16, 2012, 04:11:28 AM »

Anybody have any experience of DaTuner (http://www.applaudapps.net/) on an android device for tuning a melodeon  ?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Reed tuning - where to start
« Reply #9 on: July 16, 2012, 08:53:01 PM »

I use gStrings on Android, available from the Google store. Very nice tuner for its price!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Reed tuning - where to start
« Reply #10 on: July 17, 2012, 12:14:51 AM »

 I intend to try some reed tuning, as part of a project that will include replacing valves as necessary, and therefore re-waxing too. Once a reed-plate has been removed, obviously it will be easier to tune the inner reed, but how does it seal to whatever sort of tuning table being used?
   
 Secondly, once each reed-plate has been tuned, is it then replaced straightaway, or is a whole set put back on together?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Reed tuning - where to start
« Reply #11 on: July 17, 2012, 12:25:06 AM »

I intend to try some reed tuning, as part of a project that will include replacing valves as necessary, and therefore re-waxing too. Once a reed-plate has been removed, obviously it will be easier to tune the inner reed, but how does it seal to whatever sort of tuning table being used?
   
 Secondly, once each reed-plate has been tuned, is it then replaced straightaway, or is a whole set put back on together?

The best way to do it is to remove all the reeds from the blocks, re-valve and re-wax them back in, then tune them in the blocks. If you try to tune the reeds out of the blocks the tuning will be different when you put them back in.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Reed tuning - where to start
« Reply #12 on: July 17, 2012, 01:02:21 AM »

I intend to try some reed tuning, as part of a project that will include replacing valves as necessary, and therefore re-waxing too. Once a reed-plate has been removed, obviously it will be easier to tune the inner reed, but how does it seal to whatever sort of tuning table being used?
   
 Secondly, once each reed-plate has been tuned, is it then replaced straightaway, or is a whole set put back on together?

The best way to do it is to remove all the reeds from the blocks, re-valve and re-wax them back in, then tune them in the blocks. If you try to tune the reeds out of the blocks the tuning will be different when you put them back in.

Martyn


 So tuning of the inner reed is done through the reed-plate? Tricky, I should think. I imagine its easy to exert too much pressure and make a mess of things, as the reed is unsupported.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #13 on: July 17, 2012, 07:37:44 AM »

I intend to try some reed tuning, as part of a project that will include replacing valves as necessary, and therefore re-waxing too. Once a reed-plate has been removed, obviously it will be easier to tune the inner reed, but how does it seal to whatever sort of tuning table being used?
   
 Secondly, once each reed-plate has been tuned, is it then replaced straightaway, or is a whole set put back on together?

The best way to do it is to remove all the reeds from the blocks, re-valve and re-wax them back in, then tune them in the blocks. If you try to tune the reeds out of the blocks the tuning will be different when you put them back in.

Martyn


 So tuning of the inner reed is done through the reed-plate? Tricky, I should think. I imagine its easy to exert too much pressure and make a mess of things, as the reed is unsupported.

I will be doing some tuning today, I will try and take some photos that may help.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Reed tuning - where to start
« Reply #14 on: July 17, 2012, 11:43:13 AM »

Thanks Lester.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed tuning - where to start
« Reply #15 on: July 17, 2012, 01:23:33 PM »

Thanks Lester.
Not wishing to forestall Lester's offer at all, but a couple of years or so ago Theo also posted a link to a set of his photos dealing with this very topic. Click on each photo in turn to see a caption with more information about what is going on.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Reed tuning - where to start
« Reply #16 on: July 17, 2012, 01:41:30 PM »

Thanks Steve. It would still be interesting to see Lester handiwork.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #17 on: July 17, 2012, 05:05:33 PM »

Thanks Steve. It would still be interesting to see Lester handiwork.

Not sure there is much I can add to Theo's photos. I use the Italian style lifter and my own version which I use when tuning on my tuning table which is just a straitened Italian lifter which I up through through the air hole in the bottom of the block to lift the  reed.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning - where to start
« Reply #18 on: July 17, 2012, 05:56:15 PM »


 So tuning of the inner reed is done through the reed-plate? Tricky, I should think. I imagine its easy to exert too much pressure and make a mess of things, as the reed is unsupported.

Support of the reed tongue is fairly easy to do. Take a look at the drawing here showing the use of a "reed pinger." it's a simple tool that I use almost exclusively for lifting the tongue of the inside reed. I have several different thicknesses of "pinger" to take care of differences in the gap between the end of the tongue and the chamber.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Reed tuning - where to start
« Reply #19 on: July 17, 2012, 08:52:11 PM »

Magic, our Morris!! :-D
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal