Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Reed tuning - where to start  (Read 10041 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Reed tuning - where to start
« Reply #20 on: July 17, 2012, 09:18:40 PM »

Magic, our Morris!! :-D

Is it, Great where are you dancing next , may come and see .......... (Sorry, couldn`t resist)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #21 on: July 17, 2012, 09:50:30 PM »

Hohner have a set of videos on youtube about harmonica tuning which shows the process quite well for tuning inner reeds.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

HansW

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Reed tuning - where to start
« Reply #22 on: July 28, 2012, 11:49:25 PM »

Hi
I found this video helpful: http://www.youtube.com/watch?v=Ee1VSeALd6g
cheers, hans
Logged
ADRIATICA ITALIA c#d 3 voice
Paolo Soprani b/c 3 voice horse shoe model

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #23 on: July 29, 2012, 07:05:06 AM »

Hi
I found this video helpful: http://www.youtube.com/watch?v=Ee1VSeALd6g
cheers, hans

Interesting video but gives the impression that you can tune reeds off the block, wax them on and then install the blocks and all will be well. This is, in my experience, far from true. The tuning will be altered both by fixing the reeds to the blocks and, to a lesser extent, by fitting the blocks in the box.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed tuning - where to start
« Reply #24 on: July 29, 2012, 08:38:53 AM »

One way to deal with this is after reassembly to make a list of all the reed pitch errors in cents, then strip the box down again and adjust each reed in the equal and opposite direction.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

HansW

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Reed tuning - where to start
« Reply #25 on: July 29, 2012, 11:00:27 AM »

Hi
I will ask Martin about that, -- see him next week anyway.
Logged
ADRIATICA ITALIA c#d 3 voice
Paolo Soprani b/c 3 voice horse shoe model

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Reed tuning - where to start
« Reply #26 on: July 29, 2012, 01:42:55 PM »


 So tuning of the inner reed is done through the reed-plate? Tricky, I should think. I imagine its easy to exert too much pressure and make a mess of things, as the reed is unsupported.

Support of the reed tongue is fairly easy to do. Take a look at the drawing here showing the use of a "reed pinger." it's a simple tool that I use almost exclusively for lifting the tongue of the inside reed. I have several different thicknesses of "pinger" to take care of differences in the gap between the end of the tongue and the chamber.

I've found that a very small (6mm x 4mm x 2mm) but powerful neodymium magnet, glued to a wooden handle, is very useful for lifting the reed end to insert a pinger, especially when the reed is depressed some way into the recess. It will also lift an inside reed up enough to put the pinger in without too much twisting and turning; although this gets more difficult to do as you go up the block and the reed tongues are shorter and stiffer, and therefore harder to lift.
Logged

HansW

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Reed tuning - where to start
« Reply #27 on: August 04, 2012, 04:25:57 PM »

Hi
I asked Martin and this was his answer: Yes, the reeds go out of tune when being put into the accordion.  It could be up to +4 cent in Paolo's and +2 cent in Hohners.  He takes a reading with the reeds still in the instrument and then another reading when the reeds are removed from the blocks.  Comparing both readings gives him an idea how much he has to correct the tuning suit the instrument. (clever idea!)
Logged
ADRIATICA ITALIA c#d 3 voice
Paolo Soprani b/c 3 voice horse shoe model

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tuning - where to start
« Reply #28 on: August 06, 2012, 06:32:02 AM »

The final tuning must be done with the reed blocks in situ, using either a tuning bellows or the instrument itself. Not only in order to compensate for inevitable misreadings but also for practical reasons. An experienced tuner never concentrates on 1 reed alone and continuously cross checks with its surroundings. Do the octaves and other intervals sound right? In the case of tremolo tuning, this gets even more important: does the beating of two or more particular reeds make sense compared with all the others? You need a keyboard to be able to do that. You will also more easily find out how the reeds actually behave when they are being played and deal much more quickly with eventual issues. If one is making a living repairing and tuning, not only quality but also time is of the essence.
« Last Edit: August 06, 2012, 06:49:19 AM by diatonix »
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #29 on: September 30, 2012, 01:39:28 AM »

I am starting to gather all the pieces for my tuning table and get things rocking and rolling. I looked in my one row boxes (one is G the other C) and it looks like the reed blocks are glued in, maybe because of the slides with the stops. Is it the case that the reed blocks are glued in in the HA114 series and if so what is the best method of removal so that I can tune and what glue is used to put them back in. It certainly does not look like wax.

See images for details (2nd post for G box)


Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #30 on: September 30, 2012, 01:40:46 AM »

2nd post for HA114G
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed tuning - where to start
« Reply #31 on: September 30, 2012, 06:01:32 AM »

I'm no expert but I think if the blocks are glued in, it is simpler to leave them in place and tune the reeds 'in situ'.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #32 on: September 30, 2012, 07:37:21 AM »

Ah!  tuning melodeons with fixed reed blocks needs a different method, I use this one learned from Rees who says he got it from my favourite Frenchman Emmanuel Pariselle.

You need to construct a small frame that fits inside the folds of the bellows then you can use the melodeon itself to be its own tuning bench:

       

You then just pop the treble end on, sound the reed, pop it off and tune, rinse and repeat.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed tuning - where to start
« Reply #33 on: September 30, 2012, 09:45:39 AM »

Inspired by Carolan - a couple of planks and his Irwin bench clamps.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning - where to start
« Reply #34 on: September 30, 2012, 10:02:33 AM »

Is it the case that the reed blocks are glued in in the HA114 series and if so what is the best method of removal so that I can tune and what glue is used to put them back in.

Yes they are glued in but you should tune them in situ. If you try to remove the blocks you are likely to damage the wood, especially the thin sections that house the slides.

Access to the two banks of reeds between the blocks is tricky but not impossible.   

If it is your first tuning I would recommend starting on a box with removable blocks.  As diatonix says you should do final tuning with the blocks in situ, but with the blocks removed you have better access to the reeds and can more readily build up your skill at manipulating reeds and getting a feel for where to remove metal and how much to remove.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed tuning - where to start
« Reply #35 on: September 30, 2012, 03:50:20 PM »

Excellent, thanks for the tips!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed tuning - where to start
« Reply #36 on: September 30, 2012, 05:41:58 PM »

I use the existing bellows to tune mine. I just hold the bellows with my knees and hold the frame against the bellows frame with the fingers of both my hands on each side of the frame, and my thumb on the button.  I have a tuning bellows that I can pretune individual reeds if they are way off, or if I'm trying to determine the note of a bunch of loose reeds.....like if you drop a set on the shop floor, for instance... >:(

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed tuning - where to start
« Reply #37 on: September 30, 2012, 07:25:52 PM »

a bunch of loose reeds.....like if you drop a set on the shop floor, for instance... >:(

........ been there, bought the tee shirt  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning - where to start
« Reply #38 on: September 30, 2012, 08:50:10 PM »

I Once received a parcel of new reeds through the post with several different sets all loose in a heap on the bottom of the package.  What fun that was.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed tuning - where to start
« Reply #39 on: September 30, 2012, 09:06:17 PM »

a bunch of loose reeds.....like if you drop a set on the shop floor, for instance... >:(

........ been there, bought the tee shirt  ;)

Only yesterday  :'(
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal