Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tight Bass/Chord Strap  (Read 2159 times)

0 Members and 1 Guest are viewing this topic.

kim h.

  • New Starter
  • Offline Offline
  • Posts: 3
Tight Bass/Chord Strap
« on: July 10, 2012, 02:01:02 AM »

Hi,
   I recently acquired a 21/8 C/F  button Lignatone Melodeon manufactured in 'Czechoslovkia'.  I'm thrilled to have it because I've always wanted to learn how to play a button accordion.  Considering its age it is in remarkable shape.  My major concern is the push/pull strap.  It's too tight and, so far, I'm unable to use the bass/chord buttons.  In fact, the back of my hand is all bruised.  I've even tried wearing gloves to soften the crush.  I've gone thru all the posts which refer to straps but I didn't find one that specifically relates to my concern.

I removed the four small screws from the plate which secures the back panel to the melodeon.  I thought I would then be able to see how the strap was attached.  However, even with the screws removed I was unable to separate the panel from the body of the melodeon.  I didn't want to force anything apart so I screwed it back together.  Should I have just forced the panel from the body of the instrument, thereby exposing the inside?

If I can't adjust the strap because I can't get inside the melodeon should I just take it to a shoe repairman and have him cut the strap and add a short piece of leather to the original piece or even a piece of velcro?  I also thought of punching a series of holes in the strap thinking that might help stretch it.  I only need to add a quarter inch to a half inch of strap.  The strap on the melodeon is in very good shape with leather on the outside and felt on the inside.

I would appreciate any suggestions.  Also, I'd be interested in learning more about Lignatone melodeons.  They don't seem to made anymore.

Thanks,
Kim H.


   
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Tight Bass/Chord Strap
« Reply #1 on: July 10, 2012, 05:17:13 AM »

Hi and welcome

Lignatone was a brand name used by a general musical instrument distributor in what was then Czechoslovakia. Their accordions were generally made by Delicia in Horovice in today's Czech Republic, who still apparently use the brand name for what they call "specialist instruments".  As far as the bass strap goes, you'll probably find that the bass end plate is a very close fit in the case and will GENTLY lever out with a modicum of care. I'm trying to  visualise a bass strap with no visible external fastenings; any chance you could post a picture?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tight Bass/Chord Strap
« Reply #2 on: July 10, 2012, 07:53:27 AM »

On some larger boxes the strap is fastened inside and the fixings can only be accessed from inside.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tight Bass/Chord Strap
« Reply #3 on: July 10, 2012, 10:38:34 AM »

The idea of a shoe repair man sounds like a good one, going to a saddler would be even better. It should be an easy job for them to cut the existing strap and sew in an extension. I'd be inclined to cut it at both ends, and sew in a new 2 piece strap with a velcro overlap - otherwise there's a risk that the stitches will dig into your hand!

Plan B (which might be easier), would be to get at the internal fixings and replace the whole strap with a longer one from Charlie Marshall (CGM Musical Services)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Tight Bass/Chord Strap
« Reply #4 on: July 10, 2012, 11:36:55 AM »

persevere with the end plate and work on the fixture. As little as five millimetres movement will make a huge difference.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Tight Bass/Chord Strap
« Reply #5 on: July 11, 2012, 06:11:23 PM »

How about a bit of saddle soap to make the strap softer then  some sort of spreader to stretch the strap, it used to work on tight shoes to make them wider.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

kim h.

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Tight Bass/Chord Strap
« Reply #6 on: July 11, 2012, 09:15:48 PM »

Hi All,
   Thanks for your interest and advice.  After reading your answers I thought I might just go to the shoe guy but soon decided that maybe I should first try to carefully separate the back panel from the melodeon.  This time I gently pried the panel from the back and it worked, exposing the inside where I saw where the two ends of the straps were attached by two screws each and a small metal plate so that the screws wouldn't rip the leather/felt.  There was also extra material beyond each end so that I could punch new holes and therefore have a longer strap.  Which I did.  The trick now was to reattach the ends because the space is limited and the angles not so good.  It only took me about 45 minutes to do without too much swearing.  I used a straightened out paper clip to line up the holes in the material and wood.

Before doing that, however, I lubricated the springs of the bass/chord notes and put the air valve button thru its little hole where it belongs.  I hadn't realized that the Lignatone had an air release valve.  I thought my instrument only had a hole where the valve should be serving no purpose at all.  Everyday I learn a bit more.

With the "new" strap my hand feels better but I think the strap may now be a bit too long.  If that's the case I'll fashion a thick leather bracelet from one of my many winter gloves which I wear in Winnipeg, a place a bit colder than where many of you live.

Thanks again,
Kim H.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Tight Bass/Chord Strap
« Reply #7 on: July 11, 2012, 10:18:49 PM »

Glad we were of help.  May I ask what you used as a lubricant on the springs? There are some substances that really should be kept out of a melodeon's innards.............

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

kim h.

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Tight Bass/Chord Strap
« Reply #8 on: July 12, 2012, 10:11:21 PM »

Hi,
    Graham, in answer to your question.  I used a GUNK product called "Super Oil, the premium household oil."  It's suitable for "... springs, .... etc.  It's a very light oil and I used a toothpick to put just a bit of oil on each spring.  I don't think I allowed any to land on wood or other surfaces.  I did this because after I had purchased  the melodeon and had played it for a few minutes the treble keys began to stick and not pop back up so I exposed the innards and realized they needed a bit of oil.  I oiled them in the same manner as  I just described to you and they are fine.
    I think I was the first person to play this accordion after many years and I'm surprised at the good shape it is in.  (Knock on wood.)  There is no smell, mildew, dust, etc.  Where-ever it was stored the air remained dry.  I would say that it spent no time in a basement.  I purchased it at a silent auction conducted by a thrift store.

Kim
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal