Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to get into the bass mechanism of a Hohner Concerto II  (Read 1630 times)

0 Members and 1 Guest are viewing this topic.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159

I know - not a melodeon but hope someone can help.

Anyone know how to get into the bass mechanism of a Hohner Concerto II - 72 bass PA.
Early type with gold treble grill and Hohner badge on grill.

Some pictures of later ones on net have obvious screws to remove base but nothing obvious on this one.

Any tips?

Thanks.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: How to get into the bass mechanism of a Hohner Concerto II
« Reply #1 on: July 17, 2012, 09:21:23 PM »

if its like other Hohners of that era, the whole mech lifts out easily  in one piece..  released by two clips (one each end) on the Atlantic anyway.

Unless you mean how to get the back panel off . sometimes on Hohners (Atlantic again) the feet are captive bolts and unscrew
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to get into the bass mechanism of a Hohner Concerto II
« Reply #2 on: July 18, 2012, 12:31:50 AM »

It might be as Adam says, but I think more likely this is a model with rectangular feet. In this case remove the LH strap and you should see two fixing screws that were concealed by the strap.

Once you have the end plate off the the whole bass machine can be detached complete with button guide board, but probably it is held on place by two or four bolts rather than by clips.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: How to get into the bass mechanism of a Hohner Concerto II
« Reply #3 on: July 18, 2012, 01:33:49 AM »

It might be as Adam says, but I think more likely this is a model with rectangular feet. In this case remove the LH strap and you should see two fixing screws that were concealed by the strap.

Once you have the end plate off the the whole bass machine can be detached complete with button guide board, but probably it is held on place by two or four bolts rather than by clips.
Problem solved. - Thanks.
Yes rectangular feet and screws under strap.
Should have thought to have a peer under the strap ends - seems obvious once you know - thanks again
« Last Edit: July 18, 2012, 11:56:29 AM by TR Andy »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal