Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Screwing celuloid  (Read 1595 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Screwing celuloid
« on: July 26, 2012, 07:33:05 AM »

Can anyone tell me the best way to screw into a celluloid box? Should i drill or skewer it first to stop it splitting, or just screw straight through it ? Many thanks GL
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Screwing celuloid
« Reply #1 on: July 26, 2012, 07:44:59 AM »

I would drill a small pilot hole first but would do that for any screw anyway. Also suggest waxing any screw to lubricate its entry and make rem,oval easier should it be needed.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: Screwing celuloid
« Reply #2 on: July 26, 2012, 11:29:22 AM »

Cheers its only small ones for strap brackets i may just screw them straight in
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Screwing celuloid
« Reply #3 on: July 26, 2012, 11:38:42 AM »

The celluloid is only a thin veneer over the wood case of the instrument. I would echo Lester's comment about making some sort of pilot hole first. If the screws are only small, your pilot hole only needs to be small too, but it ensures a neat and accurate job.

Ideally your pilot hole should be the diameter of the inner shank of the threaded portion of the screw and no deeper than about half the length of the screw. If you don't have a narrow diameter drill, you can probably get away with making a shallow hole with a thin spike, or even tapping in a small nail/panel pin first, but be careful not to overdo it - it is all too easy to make a pilot hole which is too large, and then the screw won't hold properly.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Screwing celuloid
« Reply #4 on: July 26, 2012, 12:14:32 PM »

I've lost count of the number of strap brackets I have fastened.  I find that a pilot hole made with a bradawl is all that is required.  Actually the tool I use is a leather awl, designed for making holes for stitching.  Works a treat.  Make one hole first, fit the screw and partially tighten, then use the other hole(s) in the bracket as a guide for making the remaining holes.
« Last Edit: July 26, 2012, 12:26:30 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: Screwing celuloid
« Reply #5 on: July 26, 2012, 12:24:03 PM »

Thats great thanks guys !
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal