Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5 6   Go Down

Author Topic: Melodeon construction -- some more radical thoughts...  (Read 34556 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Melodeon construction -- some more radical thoughts...
« on: December 16, 2008, 01:01:59 PM »

Just to get away from the "what might make small differences in the sound" discussions which seem to have wandered off a bit -- how about some "out-of-the-box" (ho, ho) thinking about what might make *big* differences to the sound?

Materials and construction methods
---------------------------------------------

For example, having said that type of wood probably makes little difference -- because all woods have generally similar acoustic properties, and in all cases almost no sound is emitted by the case -- what about other materials? If a box is built with materials which are much more acoustically transparent than wood then more of the sound generated by the reeds will escape through it instead of being bounced around inside.

I know Stormy Hyde built a melodeon out of foam which he said (and backed up with measurements) was louder than a normal one, and since the sound transmission of materials depends pretty much on their density you could guess that lighter stiffer materials would be better for this (stiffer because they have to be strong enough to hold the box together) -- if you want to get technical, you'd want to use a material with the highest ratio of stiffness (Young's modulus) to weight and make the result as light as possible, so minimising the overall weight.

Anyone who's read The New Science of Strong Materials by J.E. Gordon -- thoroughly recommended, one of the best popular science books ever written -- will know that the figure we're talking about is called the specific modulus of a material, and is almost the same for all conventional engineering materials -- steel, titanium, aluminium, glass, wood all come out around 25GN/m2 (fibreglass is rather lower). The only easily available material which is a lot better than this is carbon fibre, which is about 200GN/m2 or eight times as stiff for the weight.

The other ways of getting more stiffness for a given weight are honeycomb materials (Aerolam, structural foam) or structures with a high-modulus skin either side of a low-density core -- like these...

http://www.bespokecompositepanels.com/pages/panels.aspx

For something low-stress like a melodeon the best choice would probably be very thin skins of carbon fibre either side of a core with the lowest possible density, but this might still be much stronger and more rigid than is actually needed. One material that was used in the 60's for speaker cones was expanded polystyrene foam with a thin skin of aluminium foil glued to it, which is *very* light for its strength but probably too prone to denting to build a melodeon out of.

Another way of reducing weight while keeping strength is to use a rigid frame structure with thin panels filling in the faces -- my Oakwood is built like this, hardwood corners form the frame and 3mm aircraft ply the panels. This could be taken much further, for example by using miniature aluminium extrusions to build the frame and very light composite panels to fill in (including the "soundboard") -- thin-walled tubes would be even better for the frame, but these are a pig to join together and attach panels to.

Come on guys, think radical here -- is anyone willing to try out some of these ideas (other than Stormy)? Let's try bringing melodeon construction into the 21st century and see what happens!

Though actually this might not be so necessary if we rethink where the reeds are in the first place...

Reeds and reed mounting
---------------------------------

Assuming we stick with conventional reeds and reed frames (because anything else is *way* too difficult to even try), it would seem a good idea to minimise the obstructions between the reed and the outside world. Conventional reed blocks and pallets are hardly the best way of doing this, with a long narrow obstructed convoluted path for the sound.

Mounting the reeds flat -- like some single-reed boxes (Castagnari Lilly), Hohner Preciosa, some Cajun boxes? -- can reduce the obstructions between the reed and the outside which gives a brighter sound, but only to a certain extent. So why not put the reeds on the outside and the pallets on the inside? (I think this was suggested many years ago but never actually tried). The reeds can just be flat-mounted over pretty much the entire end surface of the box, the levers would have to pass to the inside at the edge of the case through a seal but this would be easy to do, the keyboard could be either right at the back edge or even suspended over the reeds like a bridge.

Actually, the reed don't have to be flat at all, just on the *outside* -- which could be done with conventional reed blocks mounted on the outside instead of the inside, you just need to get the action through to the inside and bingo.

-- with the reeds on the outside I doubt if the reed block material would make any difference any more, but maybe something light like Stormy's balsa wood blocks would still be a good idea -- also the case is now on the inside so this makes little difference either.
-- the only rigid panel that's needed is the "soundboard" that the reed blocks mount on that now forms the end of the bellows, all the rest of the end could be a perforated box or cover over the reed blocks to keep dirt out of the reeds, probably lined with thin acoustically transparent foam (used under speaker grilles) which is much better at doing this than open-weave cloth.
-- the same could also be done for the bass end, though the end product might well be basses which are too "buzzy"
-- new action would be needed because pressing a button down lifts the pallets towards the bellows not away from them.

Surely this wouldn't be too difficult to try?

It's always possible we might not like the result  -- maybe it ends up *too* bright and strident -- but I expect it would make a radical difference to the sound, as opposed to small incremental changes.

Over to you box makers...

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Melodeon construction -- some more radical thoughts...
« Reply #1 on: December 16, 2008, 01:56:57 PM »

Lots of thoughts there Ian!
Just a quick comment on the external reeds idea. Getting very much like a harmonica?
Tom
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #2 on: December 16, 2008, 01:59:56 PM »

Lots of thoughts there Ian!
Just a quick comment on the external reeds idea. Getting very much like a harmonica?
Tom

Indeed it is -- so if it sounds like one and you don't like it, don't blame me -- at least it *will* be very different!

Ian

P.S. But harmonica reeds sound rather different to accordion reeds if you play the reed blocks directly...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Melodeon construction -- some more radical thoughts...
« Reply #3 on: December 16, 2008, 02:05:07 PM »

A passing similarity to a concertina, and a sheng as well, I think. 
Logged
Charter Member Presumpscot and Fore River Accordion Club

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: Melodeon construction -- some more radical thoughts...
« Reply #4 on: December 16, 2008, 02:42:58 PM »

Reeds on the outside may well improve volume as they are traditionally contained within an airtight expandable box called the bellows.  Thoughts of acoustically transparent bellows quickly evaporate (or am I being defeatist ?) but, despite much to the contrary on this web site, I have found soft woods provide mellow tones whilst hardwoods provide harsher, more brittle tones, and then there are the acoustics of the chambers.  Elsewhere on this forum Q's have been raised about finishing the wood in these chambers.  Long ago I used wood sealer inside my Polkawork and then buffed up the resultant flat filled surface.  Great improvement, not quite Castagnari but the cost/effect ratio was huge.

So my gut feeling is a box made of very thin aluminium sheet will sound like a cross between a kazoo and a musical saw.  I'm sure I will be proved quite wrong.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Melodeon construction -- some more radical thoughts...
« Reply #5 on: December 16, 2008, 02:54:09 PM »

Come on guys, think radical here -- is anyone willing to try out some of these ideas (other than Stormy)? Let's try bringing melodeon construction into the 21st century and see what happens!
Hohner already has :), check their "budget" line of Panther, Compadre and Rey del Vallenato boxes, there is lots of plastics in there where we used to find wood!

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #6 on: December 16, 2008, 03:01:39 PM »

Reeds on the outside may well improve volume as they are traditionally contained within an airtight expandable box called the bellows.  Thoughts of acoustically transparent bellows quickly evaporate (or am I being defeatist ?) but, despite much to the contrary on this web site, I have found soft woods provide mellow tones whilst hardwoods provide harsher, more brittle tones, and then there are the acoustics of the chambers.  Elsewhere on this forum Q's have been raised about finishing the wood in these chambers.  Long ago I used wood sealer inside my Polkawork and then buffed up the resultant flat filled surface.  Great improvement, not quite Castagnari but the cost/effect ratio was huge.

So my gut feeling is a box made of very thin aluminium sheet will sound like a cross between a kazoo and a musical saw.  I'm sure I will be proved quite wrong.

If the reeds are on the outside then the sound doesn't have to bounce around the internal surfaces and make its way out through the sound holes and past the pallets, so things like internal varnishing (and wood type) should make much less difference -- there is no case as such to affect the sound.

I did say that the end result might not be liked (or equally well it might be liked a lot), but how will we know unless somebody tries it?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #7 on: December 16, 2008, 03:03:07 PM »

A passing similarity to a concertina, and a sheng as well, I think. 

Since when did concertinas have the pallets on the inside and the reeds on the outside?

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #8 on: December 16, 2008, 03:11:50 PM »

Come on guys, think radical here -- is anyone willing to try out some of these ideas (other than Stormy)? Let's try bringing melodeon construction into the 21st century and see what happens!
Hohner already has :), check their "budget" line of Panther, Compadre and Rey del Vallenato boxes, there is lots of plastics in there where we used to find wood!



Moulded thermoplastics are actually rubbish as constructional materials, they're heavy weak and not very stiff compared to wood. The reason for the rash of plastic PA speaker cabinets is all to do with production cost (dirt cheap mass-produced mouldings) and nothing to do with sound quality or strength, and I expect precisely the same is true for the cheapo melodeons you mentioned.

It's actually quite difficult to come up with something which is better than wood for building the kind of things we're talking about, especially when you take cost and ease of working into account -- the (wooden) Mosquito aircraft was more structurally efficient than any other contemporary plane, and the same properties of lightness and stiffness are what we're probably looking for.

But just because it's difficult doesn't mean we shouldn't try :-)

Ian

P.S. Or change the design (reeds-out) so the sound is even less dependent on the case materials because it's generated outside them...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Melodeon construction -- some more radical thoughts...
« Reply #9 on: December 16, 2008, 04:00:40 PM »

I understand that there might be sonic and other advantages in using different materials, but the melodeon being an instrument used to play mostly "traditional music" I would tend to believe that many players (including myself) still prefer the "traditional" materials and the "traditional" sound!

I would not see myself play 19th century music with a stainless steel or composite melodeon...

In the 1960's Maccaferi, a reputed guitar maker, developed an all-plastic guitar, and although it sounded "fine" it was a commercial disaster as guitar players preferred guitars made of wood...

Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Melodeon construction -- some more radical thoughts...
« Reply #10 on: December 16, 2008, 04:22:58 PM »

Nice one, Ian!  We can sort out two unknowns with the prototype, with the reeds on the outside you can dunk them in the watering can during gigs and see if that mellows the sound!

I believe that Stormy's compromise is probably the most effective, balsa core with hard skins.  I would still prefer wood, as it is easier to bond two dissimilar woods than wood to aluminium and it would still be lighter.  Too light and it wouldn't stay still to be played!  I would expect some high frequency attenuation from a wood surface by comparison with ali, though.  There are, as you point out, a number of off-the-shelf composites which would suit although if treated the way many of us treat our boxes then delamination could become an issue.  This is true of many boats with end-grain balsa cored GRP decks.  Damp and flexure do the damage over time.

One could build a glove box type of arrangement to allow an internal keyboard to be used for the inside-out configuration, though...

New box, Sir?  What glove size?

Would we carry latex gloves so as to lend someone our pride and joy for a try out?

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #11 on: December 16, 2008, 04:24:16 PM »

I understand that there might be sonic and other advantages in using different materials, but the melodeon being an instrument used to play mostly "traditional music" I would tend to believe that many players (including myself) still prefer the "traditional" materials and the "traditional" sound!

I would not see myself play 19th century music with a stainless steel or composite melodeon...

In the 1960's Maccaferi, a reputed guitar maker, developed an all-plastic guitar, and although it sounded "fine" it was a commercial disaster as guitar players preferred guitars made of wood...



Personal preference is always valid, especially with regard to "traditional" music.

I guess that means you don't play any traditional tunes dating from earlier than the mid-1800s then, since melodeons hadn't been invented? That must cut down your repertoire an awful lot...

And I assume your boxes are all "old-style" with one-piece zinc reed frames and brass reeds -- none of those nasty modern steel reeds in individual aluminium frames for you?

That *really* shows dedication to history, playing something traditional that's truly horrible compared to those new-fangled instruments :-)

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #12 on: December 16, 2008, 04:42:28 PM »

Nice one, Ian!  We can sort out two unknowns with the prototype, with the reeds on the outside you can dunk them in the watering can during gigs and see if that mellows the sound!

I believe that Stormy's compromise is probably the most effective, balsa core with hard skins.  I would still prefer wood, as it is easier to bond two dissimilar woods than wood to aluminium and it would still be lighter.  Too light and it wouldn't stay still to be played!  I would expect some high frequency attenuation from a wood surface by comparison with ali, though.  There are, as you point out, a number of off-the-shelf composites which would suit although if treated the way many of us treat our boxes then delamination could become an issue.  This is true of many boats with end-grain balsa cored GRP decks.  Damp and flexure do the damage over time.

One could build a glove box type of arrangement to allow an internal keyboard to be used for the inside-out configuration, though...

New box, Sir?  What glove size?

Would we carry latex gloves so as to lend someone our pride and joy for a try out?

Rob.

I've had beer poured into a melodeon before now and it's not very helpful... :-(

Glad to see some positive comments for a change. You're right that a balsa core with thin hard skins is a good compromise from the strength/weight point of view as well as manufacturability and durability -- I seem to remember Stormy saying that any dents could be removed by steaming them out with a hot iron, which certainly isn't possible with solid wood. I would hope that most melodeons don't suffer quite as bad environmental conditions as a boat in a Force 9 gale, though as I said beer doesn't mix well with them...

I'm not sure you could end up with something too light to be playable -- for example, with the Preciosa the actual casing is already pretty light (helped by the very small size and lack of conventional reed blocks, of course), most of the weight of the treble end is the reeds and frames. The difference would be larger on a more conventionally-sized box.

A "glove box" is an ingenious idea (I've played wearing socks on my hands before now, it couldn't be as bad as that) but hardly necessary, but some different kind of action from normal would certainly be needed to get the pallets to lift inwards instead of outwards.

If the "reeds-out" idea works out then there is hardly any "box" to worry about anyway, all you really end up with is a bellows frame attached to a "soundboard" (God, I hate that word!) and the keyboard, with an acoustically open (but hopefully sufficiently robust) cover over the reed blocks.

This would certainly give the smallest lightest and loudest melodeon possible -- whether anyone *likes* the result is a different matter!

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Melodeon construction -- some more radical thoughts...
« Reply #13 on: December 16, 2008, 04:56:07 PM »

Since when did concertinas have the pallets on the inside and the reeds on the outside?

Well . . . I said passing: aren't concertina reeds mounted flat against the soundboard, rather than on any kind of a block, very close to the outside world?  And if I'm not mistaken there are several concertina makers who build instruments using accordion reeds, which presumably sound different to the accordions for which those reeds were initially intended, possibly as a result of their different position in the instrument.  Several free reed instruments have reeds that are are less muffled, contained or enclosed by other stuff.  Thus, the strident sound of a Cajun box, without a grill; the distinctive sound of a concertina, with a lot of reeds, and not much box to put them in.  

Whatever the case, I think the sheng really does have the arrangement you've suggested, and an extraordinarily bright sound:http://www.myspace.com/theshengplayer
Logged
Charter Member Presumpscot and Fore River Accordion Club

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon construction -- some more radical thoughts...
« Reply #14 on: December 16, 2008, 05:07:32 PM »

I seem to remember Stormy saying that any dents could be removed by steaming them out with a hot iron,

Could lead to some interesting excuses for missing band practice.  "I've got to stay in tonight, the melodeon needs ironing." ;D ;D

Quote
which certainly isn't possible with solid wood

Do you have evidence for that statement sir?  Since you are so keen to criticise statements of opinion masquerading as fact you should really try a but harder to check your own statements.

I've occasionally used this technique myself and found it to work on other timbers.  The book "Repairing and Restoring Antique Furniture"  by John Rodd describes the technique in detail on page 60. There are also several descriptions of the technique which can be found by a Google search.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #15 on: December 16, 2008, 05:19:07 PM »

I seem to remember Stormy saying that any dents could be removed by steaming them out with a hot iron,

Could lead to some interesting excuses for missing band practice.  "I've got to stay in tonight, the melodeon needs ironing." ;D ;D

Quote
which certainly isn't possible with solid wood

Do you have evidence for that statement sir?  Since you are so keen to criticise statements of opinion masquerading as fact you should really try a but harder to check your own statements.

I've occasionally used this technique myself and found it to work on other timbers.  The book "Repairing and Restoring Antique Furniture"  by John Rodd describes the technique in detail on page 60. There are also several descriptions of the technique which can be found by a Google search.

OK, OK, I should have said "as easy" not "possible" -- guilty as charged :-)

One typo or one mistake does not a blinkered opinion make...                   (hey, that's almost worthy of McGonagall)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon construction -- some more radical thoughts...
« Reply #16 on: December 16, 2008, 05:21:23 PM »

Why would it not be just as easy with a different type of wood?  Another guess or opinion stated like a fact.   Again it just seems you are doing what you are criticising others for.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Melodeon construction -- some more radical thoughts...
« Reply #17 on: December 16, 2008, 05:51:02 PM »

And I assume your boxes are all "old-style" with one-piece zinc reed frames and brass reeds -- none of those nasty modern steel reeds in individual aluminium frames for you?

That *really* shows dedication to history, playing something traditional that's truly horrible compared to those new-fangled instruments :-)
Very funny!

Just check my signature to see what instruments I play :)
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

stillicidia

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Melodeon construction -- some more radical thoughts...
« Reply #18 on: December 16, 2008, 06:12:56 PM »

quite right Theo in fact Ive used steam for bending and shaping wood up to 6in x 4in when restoring a classic racing yacht, it can soften all the hard woods quite considerably.
My bigest problem with using plastics etc is they are just not traditional - I met a couple of guys who started making carbon fibre violins and cellos and another who started making aluminium harps - I'm not sure but I don't think they are still in production - there certainly are not many around - even though they produced some incredibly light weight shiny instruments they just don't have the same feel, balance etc. with todays electronics you can make any stick into a digital instrument that will perfectly match the sound you want - I've got one in the form of an electronic chanter but as it is digital and midi I can produce any sound I want from it but it uses a different skill and doesn't resemble the original of any instrument and I wouldn't be caught dead with it in the folk club (though that might be what happened if I was found with it) sometimes Tradition with a big T needs to be respected and change doesn't have to happen just because it can.
Richard
Logged
Dyslexic fingers and deaf as a post!
member of accordions anonymous - I admit it I am an accordion addict!
it all started with just one! just a little one! then another, and another...

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon construction -- some more radical thoughts...
« Reply #19 on: December 16, 2008, 06:17:38 PM »

Why would it not be just as easy with a different type of wood?  Another guess or opinion stated like a fact.   Again it just seems you are doing what you are criticising others for.

Isn't it easier on less dense/softer woods? Can you really steam a dent out of piece of ebony as easily as a piece of balsa?

I expect not, but if anyone has experience to the contrary I'll happily admit I was wrong.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1] 2 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal