Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: How to efficiently ruin an accordion  (Read 19025 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How to efficiently ruin an accordion
« Reply #40 on: August 25, 2013, 12:16:01 PM »

I wonder how many on this forum who are making fun of this guy

I don't agree that questioning whether a technique is advisable constitutes "making fun of" someone. I hope none of us on here would be so insensitive.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How to efficiently ruin an accordion
« Reply #41 on: August 25, 2013, 12:18:23 PM »

Wot GPS said  ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: How to efficiently ruin an accordion
« Reply #42 on: August 25, 2013, 01:54:14 PM »

I wonder how many on this forum who are making fun of this guy

I don't agree that questioning whether a technique is advisable constitutes "making fun of" someone. I hope none of us on here would be so insensitive.

Graham

Check the title of this thread and several earlier posts.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: How to efficiently ruin an accordion
« Reply #43 on: August 25, 2013, 02:29:24 PM »

I've tried using a dremel type tool, and I can make it work without damaging the reed, but I find it needs more effort to keep it under control than do hand tools and it takes longer to use.  It is much heavier to pick up, and you have to wait while the tool spins up before you can apply it, and you have to wait for it to spin down after use.   With file or scratcher I can keep the tool in my hand all the time, no picking up and no waiting.  If you are only tuning the occasional reed this would not be significant, but  for example there is getting on for 200 tongues in a 2 row, 3 voice, 12 bass and when doing a full re-tune the difference becomes highly significant in terms of time and effort.  There is also the horrible buzzing noise.  When I'm tuning I need as near as possible complete silence, even noises in between sounding reeds are a distraction.

I don't like it for those same reasons.  One of the things I found that really improved the control was to round the tip of the grindstone.  The dremel conical grindstone tips have a sharp edge at the tip when new.  Rounding this off helps a lot.  It really does work a treat for raising the pitch by a semitone or whole tone.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to efficiently ruin an accordion
« Reply #44 on: August 25, 2013, 02:49:02 PM »

I've never had any problems raising the pitch by that amount with a good sharp file.  For me the dremel is a solution in search of a problem.  I think they are useful tools for many other things, but on reeds? Not for me.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: How to efficiently ruin an accordion
« Reply #45 on: August 25, 2013, 03:21:56 PM »

I have always protected my ears. My wife makes jewelry and occasionally I have to break out the Dremel with the diamond bits to ream out a hole in beads. I wear ear protection whilst doing it because of the high pitch of the motor. I have not tuned a reed yet (still building equipment) but if I were using a Dremel for 200 reeds I would probably want ear protection on and that would be another obstacle at the tuning point to take them on and off 200 x "How often I need to make changes to a reed" times... As we get older the high frequencies go first.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Colombia20102018

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to efficiently ruin an accordion
« Reply #46 on: August 26, 2013, 05:28:14 PM »

Great video - thanks for posting.
Thanks. The duet is the best part.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #47 on: August 28, 2013, 04:13:20 AM »

I have found a comfortable middle ground between the Dremel & diamond bit grinder and the file & scratch methods that I will share for your consideration.

There are some very nice rotary polishers made for both the manicure industry and for dental crown touch up and polishing. They are smaller and less powerful than Dremel tools. Here are some photos:
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #48 on: August 28, 2013, 04:15:00 AM »

These are beautifully made with two separate sections: a DC motor portion with a drive coupler; and a nose-piece tool chuck portion with its own set of two precision ball bearings. This allows you to grip the tool very near the working tip for excellent control. In the first picture I’ve split the two halves and am showing the cross drive coupler. You can also see the rear ball bearing on the nose-piece on the right.

The second picture picture shows the nose-piece disassembled. The upper portion is the housing and still contains the front ball bearing (out of sight inside). The lower portion is the tool chuck showing the rear ball bearing and the plastic drive coupler. It also displays a bag of rubber abrasive polishing bits in 5 different grades between fine and coarse. I believe these were first manufactured for polishing tool steel molds used for plastic injection molding. These rubberized abrasives are perfect for tuning accordion reeds! They remove metal very slowly. Another great feature is, due to the rubber binding, the contact area gets bigger the harder you push on it so has much less tendency to dig in or gouge. I still move the bit in either a circular or left/right oscillating motion that produces a large even contact area. 
« Last Edit: August 28, 2013, 05:53:49 AM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #49 on: August 28, 2013, 04:20:28 AM »

Here is a picture in use. The reedblock is on my tuning table and the reed below the shim tool is sounding.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #50 on: August 28, 2013, 04:32:32 AM »

Picture 1 shows the shim is behind the reed ready for tuning.  Picture 2 shows the rubberized abrasive bit ready to work. This is a simulated photo as I would need three hands to hold the shim, polisher and camera – hence the bit is not rotating. Also my right fingers would be in the photo holding the tool very near the end.

I assure you this is a big improvement in control and results versus the dremel and rigid diamond bit.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #51 on: August 28, 2013, 04:48:14 AM »

The bit shaft is 3/32" diameter so quite small. Having two ball bearings supporting the nosepiece makes the bits run very smooth without shake or runout. Another advantage is that the rubberized abrasive can easily be re-trued or shaped quickly using an aluminum oxide dressing stone (pic 2). Pic 1 shows a polisher and a two button footswitch. I have wired this up so that I can control the direction of the polisher (clock-wise or counter clock-wise rotation) hands-free. This is needed since it is a disaster if you are working on the tip of the reed and the bit catches the edge and instantly curls the reed metal back permanently. (don't ask how I know:) By controlling the direction, this situation can be avoided entirely.
« Last Edit: August 28, 2013, 05:08:14 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #52 on: August 28, 2013, 05:46:16 AM »

Here I show some of the results. I pulled rusty reeds from my junk pile to help accent the polished area for the photographs. First pic shows the polish patch when lowering the pitch. Notice that it is possible to stay mostly clear of the edges so as to not alter the important reed/reedplate gap characteristics as mentioned by others earlier in this thread. The second pic shows pitch raising, again with the ability to avoid the edges.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #53 on: August 28, 2013, 06:18:25 AM »

This pic shows a broken reed with the common straight break across the width of the reed. This is the result of a stress fracture. As shown in the video earlier in this thread, the manufacturing process involves sanding the reed across the width. This, unfortunately leave minute scratches in the surface. Consider the middle G reed on a DG box. It is vibrating at 785 hertz. The reed reaches a million cycles within 22 minutes of use! If one of the surface scratches is a little deeper than the surrounding ones it is possible for the scratch to slowly propagate through the reed as a crack eventually resulting in a break.

A side benefit of polish tuning is that these minute scratches are polished out greatly reducing the chance for a stress fracture.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #54 on: August 28, 2013, 06:29:41 AM »

I continue to use files at times myself- especially if I need to raise the pitch of a mounted inner reed a good amount. I will file the tip of the reed until close but I will finish up with the polisher because it is so controllable and repeatable. The rubberized abrasive tools are a real boon for tuning. I appreciate the melnet community and thought others here would be interested in this polishing method as a middle ground between grinding and filing.
« Last Edit: August 28, 2013, 07:01:57 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to efficiently ruin an accordion
« Reply #55 on: August 28, 2013, 08:54:19 AM »

Thanks for going to so much trouble to provide an interesting set of photos and descriptions.
I'm sure that you have learned to control your rotary polisher very carefully and can use it on reeds without causing damage.

But even so, in my opinion, several problems appear to remain:

1. Compared with files/scratchers which are thin and manoeuvrable, the relative bulk of the polisher suggests that it is difficult or impossible to use when tuning reeds in situ on the reed block and in the instrument. Therefore, not so good for the final fine tuning process which really needs to be carried out with reeds and blocks in the instrument.

2. The polisher tips are too large for working on the underneath 'pull' reeds through the reed plate slots. So - you can only work on about half of the reeds in an instrument using this method. How do you get around this, other than by removing the reed plate from the block and turning it over? Again, this precludes precision tuning work in situ in the instrument.

3. There would also be the same spin-up/spin-down times and the noise mentioned by earlier contributors.

I can see that the tool might be useful for gentle and rapid removal of rust when renovating old reeds which are not mounted in reed blocks, but otherwise I am not at all convinced it is a good idea, sorry. I will stick with my files and scratchers.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to efficiently ruin an accordion
« Reply #56 on: August 28, 2013, 09:40:03 AM »

The smooth finish and ability to polish out cracks is definitely a plus, but I expect that to reduce the chances of fracture you would have to do rather more polishing than is strictly necessary for tuning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #57 on: August 28, 2013, 02:56:20 PM »

Good points. Steve-You are right in that I’ve left out an important part of the story- the inner reeds in situ. (points 1 & 2)
I am most often working on older Hohners that require full removal from the reedblock for valve replacement anyway so I am tuning the push reed in my fixture using rubber abrasive bits (shown in recent photos), flipping the reedplate in the fixture and tuning the pull reed with the same bit. This usually gets the pitch within +/- 2 cents after remounting on the reedblock. The final tuning is done on the reedblock. Outer reeds are as I have described earlier. Inner reeds usually require different bits. In this picture I’m showing some of the other bits. The left three are 3/32” shaft diamond bits with spherical, oval, and straight with hemispherical tip from left to right. The narrow profile is required to access the back side of the inner reeds.
« Last Edit: August 28, 2013, 07:03:35 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #58 on: August 28, 2013, 03:01:00 PM »

This picture shows how lowering the pitch is done using either the spherical or straight/hemisphere bits. This is accomplished while on the tuning table right over the air hole so the tune-check interval is quick. I don’t have a picture of raising the pitch but that does require pivoting the reedblock onto one side allowing insertion of a brass rod or wooden tool (bamboo BBQ skewers work well on larger reeds) through the air hole to lift the inner reed tip. Once lifted the oval diamond tip can be used to remove metal- again away from the edges.

If the valves are good and an inner reed pitch needs to be raised quite a bit, rather than removing the reedplate I will use a file on the reed tip to remove most of metal but tend to final tweak the last 1 or 2 cents with the polisher just because for me it has become fast and reliable. It is very rare for me to overshoot the target pitch requiring reversal. The very highest reeds are the most tricky and most prone to overshoot.
« Last Edit: August 28, 2013, 03:29:48 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to efficiently ruin an accordion
« Reply #59 on: August 28, 2013, 03:06:02 PM »

Point 3- spin-up/spin down time & noise.
These are small, low inertia tools that can go from 0 to 25,000 rpm in about ½ second. I’ve never experienced any delay in my tuning due to this. Spin down may be 2 or 3 seconds but I’m either still holding the polisher in my right hand while I look at the tuning meter or placing it onto a cradle where the bit is held up in the air anyway. On my dual footswitch model, due to the polarity reversal wiring, it actually shorts the motor leads together when turned off providing electronic braking.
Concerning noise, these are designed for manicurists where both customer and manicurist are chatting away within 2 feet of the tool. They are quiet. I will make a video some time to demonstrate. I often leave the motor running during the quick tune/check cycle since it doesn’t disturb the tuners.
Logged
too many boxes...please buy one, or two, or
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal