Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Earliest Al reedplates - when?  (Read 7785 times)

0 Members and 1 Guest are viewing this topic.

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Earliest Al reedplates - when?
« Reply #20 on: October 23, 2013, 02:10:03 PM »

Just to add to the sauce...the circle stamped reeds were also found in the accordions sold under the name "Supertone" in the USA.  The photo posted by Hasse of the left end of the old melodeon looks very much like the form of the older Supertones, especially the Hohner-like corners and the marquetry. The reeds in my Supertone had zinc plates, however, but they were lovely sounding. Still are, I hope  (:)

Yes, Forrest the Supertone is still sounding super! Thanks again. All the Supertones I have had were zinc although I have another pokerwork size with 12 bass and Hohner reeds I need to open up to confirm whether zinc or aluminum- I've forgotten.
Logged
too many boxes...please buy one, or two, or

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #21 on: October 24, 2013, 02:44:38 AM »

... the same Guerrini catalogue that I mentioned previously (which I now think may even be as early as 1918, based on internal evidence) states:

     "To obtain greater lightness and to come more closely to perfection, aluminum is extensively used in the interior detail of the instruments.

     Aluminum, likewise, forms the reed plates ...
"

So I dug out my MAY 25 1921 Guerrini Brothers tonight, to see what it might reveal - and thought it felt rather heavy. It has brass reed frames on one block, and zinc ones on the other...  :o

But the soundboard is aluminium.  ::)

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Earliest Al reedplates - when?
« Reply #22 on: October 24, 2013, 07:32:30 PM »

I had an unusual Wheatstone McCann Duet with aluminium reed  frames in it.
It was quite an unusual concertina all round.
It had an Ebony fretted left hand side and a metal ended right hand side, with ali reed frames. We supposd the wood left hand side was to give it a mellow tone to the lower reeds and the metal end for the brighter treble ( melody ) side.
As a 67 (?) key box, it was light for it's size compaired to a more standard brass reeded concertina.  The wood too had been slightly hollowed where finger strikes had worn the fretworking away. I'd have thought it was possibly between 1900 - 1920 ish,
Bet it had an interesting life......
The lightness of it was quite noticable.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Earliest Al reedplates - when?
« Reply #23 on: October 25, 2013, 07:42:46 PM »

I found the rest of the parts from the box I described in the first post, and I remembered wrongly = it do not have a plate with "Stahstimmen". But it did have a aluminium keyboard plate and also a aluminium grill, don't know how I could forget that because the grill sits in the same box I put the aluminium reed plates in...

Reed plate blanks are virtually always stamped out of a sheet, the only exceptions I see are bass and helicon bass reeds where the blanks are often die cast.

These aluminium reed plates of my they definitely look casted. If you look closely at the picture in the first post you see it very clearly in the upper right corner.
« Last Edit: October 25, 2013, 09:26:59 PM by Hasse »
Logged
Sweden, Skåne

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Earliest Al reedplates - when?
« Reply #24 on: October 25, 2013, 09:35:15 PM »

Here are pics of an early 1900's Hohner one row key of E box with mixed zinc and aluminum plates with square stamp on both. Instrument is currently for sale on ebay with more pictures (item#281189606222). I am keeping a spreadsheet with data on the boxes restored including the reedplate material and marks. 120 and climbing:)

There's that odd "square" reed plate marking again. Ed (Telemorris), I think it was, posted a shot of them here a while back. His photo came from a friend, and out of a Hohner, I think? Could be way off base there.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Earliest Al reedplates - when?
« Reply #25 on: October 26, 2013, 03:03:14 AM »

One of the more unusual reed plate set ups I ran into was a late 1800's Palo Soprani chromatic I restored. The reed plates were iron with steel reeds, and the lowest few reeds on the keyboard were brass. The brass reeds gave low notes without lead tips, and the response was really fast.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #26 on: October 26, 2013, 11:40:17 PM »



WRT the San Francisco manufacturers, I think the earliest San Francisco Galleazzi chromatic accordions that I've seen had steel reeds on brass plates.  Will check my early San Francisco P. Guerrini chromatic* later this week, but I believe it has steel reeds on aluminum plates.


*
http://forum.melodeon.net/index.php/topic,5706.msg79691.html#msg79691



Hi all,

OK, have been able to re-acquaint myself with the early Guerrini 3-row chromatic box that I mentioned above, and the early Guerrini catalog also.  Will attach the photos, posted in the earlier thread, again this time for convenience.

I think the accordion was made between 1904 and the first world war -- so earlier than the widespread manufacturing use of aluminum, as Stephen mentioned above.  I'll have to review the Guerrini addresses, but the Dupont St. address may be from before the 1906 San Francisco earthquake.*  The general construction of the box, very elegant wood veneer with the maker's name and address on a metal plate, and with the hardware and strap to allow one long strap to serve as bellows-strap and shoulder strap, are consistent with very early San Francisco chromatics.

Yet the accordion does have mostly aluminum-framed reeds, very nicely made too, that seem entirely original to the box.  A few on the melody side, and a few on the bass side, have zinc plates.  The tongues are steel.

The catalog shown has some of the same text quoted by Stephen from his catalog, mentioning the use of aluminum in construction and reedplates.  My example mentions "our latest 1917 models" so may date from 1917 -- or possibly from late 1916 since accordion models for the next year were often announced early, as with cars.

PG

* Indeed, it seems that there was no Dupont St. after the earthquake:

http://en.wikipedia.org/wiki/Grant_Avenue

« Last Edit: October 27, 2013, 12:57:42 AM by pgroff »
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Earliest Al reedplates - when?
« Reply #27 on: October 28, 2013, 04:05:34 AM »

I think the accordion was made between 1904 and the first world war -- so earlier than the widespread manufacturing use of aluminum, as Stephen mentioned above.  I'll have to review the Guerrini addresses, but the Dupont St. address may be from before the 1906 San Francisco earthquake. [Indeed, it seems that there was no Dupont St. after the earthquake]  ...
Yet the accordion does have mostly aluminum-framed reeds, very nicely made too, that seem entirely original to the box.

That would make it from before the invention of Duralumin then, so I hope the reed plates are in better condition than in some of the early Lachenal Edeophone concertinas...   :-\

Quote
The catalog shown has some of the same text quoted by Stephen from his catalog, mentioning the use of aluminum in construction and reedplates.  My example mentions "our latest 1917 models" so may date from 1917 -- or possibly from late 1916 since accordion models for the next year were often announced early, as with cars.

Mine has the same 1917 reference and it's probably another copy of the same catalogue, but I've based my "earliest possible" dating of 1918 on the artist's signature on the front cover, which appears to be "LAMA 1918" with the 8 in an Art Nouveau style (like in this #18 house number in Paris: http://1.bp.blogspot.com/-qrneo1BvMvc/Te0-7WfQC8I/AAAAAAAAAH8/k1o25CBEvIA/s200/Numbers%2Bin%2BParis-%252318-1.jpg) that could very easily be misread as a 3.


The illustration of the shop, on the back cover, is dated '17.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Earliest Al reedplates - when?
« Reply #28 on: October 28, 2013, 06:15:43 AM »

Hi Stephen,

I agree the date on that illustration might be 1918 or might be read as 1913.  Also that there are dates of 1917 in the catalog.  If yours is from the same printing as mine, you might notice that the year 1917 has been set a little differently than the surrounding text, so some / all of that text might be re-cycled from an earlier printing, as indeed at least one of the artist photos is seen both in that catalog and in the photo of this 1915 display:

http://online.sfsu.edu/hl/a.html

If the catalog might be as late as 1918, still I think substantial content in it dates earlier. I personally believe Guerrini was using aluminum reedplates earlier.  It will be interesting to research the Dallapè dates more closely.

The aluminum reedplates in the "Dupont St." P. Guerrini chromatic are in excellent shape. That raises a number of possibilities, including that this accordion was re-reeded early (doesn't appear so however), or that stable aluminum alloys may have been available in some form prior to your invention date for duraluminum, or that the problems experienced in the early aluminum concertina reedframes may have been triggered by high humidity, which was not a problem for this particular accordion . . . (or other hypotheses could be proposed and tested also).

If I remember Colin Dipper's assessment of those problematic early aluminum concertina reedframes correctly, his view was that high humidity (almost a given condition for concertinas played or stored in England) had a role in the instability of those aluminum parts.  Paraphrasing, I remember him suggesting "when you get moisture in there, the dissimilar metals start acting like a battery."  Later aluminum reedframes as used by Wheatstone for example seem to be much less likely to corrode to the point of crumbling, even when the steel reeds attached to them sometimes have become very rusty.

PG
« Last Edit: October 28, 2013, 06:31:25 AM by pgroff »
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal