That AD project was early in my MADness. I have tuned/restored 50 or so boxes since then so I believe my skills have improved. There are 10 or 11 for sale on ebay at the moment, most with demo videos highlighting the tuning. I am a university faculty teacher/tutor for deaf & hard of hearing engineering students by day (Rochester Institute of Technology) and a serious button accordion hobbyist by night and weekends. I'm sure I could get your Venezia up and running for a lot less than $3000. The AD box should need very little. I didn't repad the pallets and that would be a logical next step. Has the tuning held well? I love the sound of the brass reeds but I'm interested in knowing if they stay in tune as long as steel reeds. I am attaching a picture of 6 boxes similar to yours I currently have in the shop. Contact me if you wish to discuss further.
The A/D does have a nice sound, and its tuning has held up, though I do not play it as much. I have been playing a GC Hohner 2-row HA-2815 that is not pokerwork, but is charcoal celluloid, just like the C/F that you have on ebay
http://www.ebay.com/itm/281208497660. My charcoal celluloid 2815 has had some work done on it including re-padding and some stoppage under the buttons, so it is quite nimble. So after playing that, when I switch to the A/D, well I notice the padding needed, and if I try to play a single-note-multi-finger triplet, I noticed the difference. So the comparison is not fair, but I'd like the A/D to play a little more like my GC charcoal celluloid 2815. So, I have the A/D now in a box addressed to The Button Box. They said that it might not need as much work as I might think, to reduce the "tap-dancing" and improve the response time.
I did not mention the 3-row Venezia to them, because I thought that they would say the same as "Ike", and thought that is was a lost cause. But, now that you and a few others are finding that $3000 to be a bit high, there is a renewal of hope.
The metal keyboard top and buttons are misaligned so that buttons get broken off when returning to up position. I loosened the screws holding the keyboard top, and it slid a millimeter away so that fewer buttons are now misaligned. Some are still misaligned. Ones that are broken off, I have in a pill container.
And there is 1 customization I'd like:
On the bass side, there are a pair of buttons giving a D flat, and a D flat major chord in both directions. I would like that changed so they give an A flat and A flat major on the pull, but still a D flat and D flat major on the push. I can’t believe anyone would design an instrument with an E-flat row, 18 bass buttons, but not one pair of those 18 basses providing an A flat major chord and root on the pull.