Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Shops in the States for Repiar and Restorations  (Read 7036 times)

0 Members and 1 Guest are viewing this topic.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Shops in the States for Repiar and Restorations
« Reply #20 on: December 04, 2013, 06:30:36 AM »

Quote
I'm sure I could  get your Venezia up and running for a lot less than $3000.

Well that's good news. Was I the only person reading who thought the "estimate" that the other guy gave was way off the mark?

I once got a similar figure for the refurb of a Hohner 2-row. The guy who quoted me had 30+ years experience servicing PAs and chromatics. When he remarked that the button accordion was basically a toy and wasn't worth the repair, it set off lots of alarm bells.

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Shops in the States for Repiar and Restorations
« Reply #21 on: December 04, 2013, 02:33:35 PM »

That AD project was early in my MADness. I have tuned/restored 50 or so boxes since then so I believe my skills have improved. There are 10 or 11 for sale on ebay at the moment, most with demo videos highlighting the tuning. I am a university faculty teacher/tutor for deaf & hard of hearing engineering students by day (Rochester Institute of Technology) and a serious button accordion hobbyist by night and weekends. I'm sure I could  get your Venezia up and running for a lot less than $3000. The AD box should need very little. I didn't repad the pallets and that would be a logical next step. Has the tuning held well? I love the sound of the brass reeds but I'm interested in knowing if they stay in tune as long as steel reeds. I am attaching a picture of 6 boxes similar to yours I currently have in the shop. Contact me if you wish to discuss further.

RIT, huh? I'm going to be up in West Henrietta for work next week (Tue-Fri). Know any good spots to go to for folk/trad sessions?
Logged
Sean McGinnis
Bordentown City, NJ, USA

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Shops in the States for Repiar and Restorations
« Reply #22 on: December 04, 2013, 05:16:21 PM »

Next week is an off week for sessions (more first and third week events) but there is an Irish Christmas in America concert Wednesday night featuring excellent boxman Seamus Begley and fiddler Oisin Mac Diarmada in nearby Fairport. I plan on attending with my wife. You are also welcome to stop by my house Tuesday or Thursday evening to squeeze some of my boxes and see the shop. I'm in Spencerport.

Scott
Logged
too many boxes...please buy one, or two, or

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Shops in the States for Repiar and Restorations
« Reply #23 on: December 04, 2013, 07:15:58 PM »

Thank you. I'll respond with a PM for more details. Sorry for off-topicing thing thread as much as I did.
Logged
Sean McGinnis
Bordentown City, NJ, USA

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Shops in the States for Repiar and Restorations
« Reply #24 on: December 05, 2013, 04:26:40 AM »

Quote
Quote
I'm sure I could  get your Venezia up and running for a lot less than $3000.

Well that's good news. Was I the only person reading who thought the "estimate" that the other guy gave was way off the mark?

No, you were not.  Maybe he didn't want the job but didn't want to say 'no' either...
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #25 on: December 06, 2013, 03:20:38 AM »

I'm in western ny and have a shop for tuning and repairing. The AD Hohner you have I sold several years ago. Was it to you? It is sitting on my braided hall rug in your picture so I assume so. I had replaced the leather valves with plastic film type and tuned it quite dry. I had left the original leather seats for the reedplates instead of converting to wax. It had brass reeds. I am attaching a picture of the treble reeds (on the same braided rug;)
Yes.  That's the one! 
Logged

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Shops in the States for Repiar and Restorations
« Reply #26 on: December 06, 2013, 03:46:44 AM »

That AD project was early in my MADness. I have tuned/restored 50 or so boxes since then so I believe my skills have improved. There are 10 or 11 for sale on ebay at the moment, most with demo videos highlighting the tuning. I am a university faculty teacher/tutor for deaf & hard of hearing engineering students by day (Rochester Institute of Technology) and a serious button accordion hobbyist by night and weekends. I'm sure I could  get your Venezia up and running for a lot less than $3000. The AD box should need very little. I didn't repad the pallets and that would be a logical next step. Has the tuning held well? I love the sound of the brass reeds but I'm interested in knowing if they stay in tune as long as steel reeds. I am attaching a picture of 6 boxes similar to yours I currently have in the shop. Contact me if you wish to discuss further.
The A/D does have a nice sound, and its tuning has held up, though I do not play it as much.  I have been playing a GC Hohner 2-row HA-2815 that is not pokerwork, but is charcoal celluloid, just like the C/F that you have on ebay http://www.ebay.com/itm/281208497660.  My charcoal celluloid 2815 has had some work done on it including re-padding and some stoppage under the buttons, so it is quite nimble.  So after playing that, when I switch to the A/D, well I notice the padding needed, and if I try to play a single-note-multi-finger triplet, I noticed the difference.  So the comparison is not fair, but I'd like the A/D to play a little more like my GC charcoal celluloid 2815.  So, I have the A/D now in a box addressed to The Button Box.  They said that it might not need as much work as I might think, to reduce the "tap-dancing" and improve the response time.

I did not mention the 3-row Venezia to them, because I thought that they would say the same as "Ike", and thought that is was a lost cause.  But, now that you and a few others are finding that $3000 to be a bit high, there is a renewal of hope. 

The metal keyboard top and buttons are misaligned so that buttons get broken off when returning to up position.  I loosened the screws holding the keyboard top, and it slid a millimeter away so that fewer buttons are now misaligned.  Some are still misaligned.  Ones that are broken off, I have in a pill container.

And there is 1 customization I'd like:
On the bass side, there are a pair of buttons giving a D flat, and a D flat major chord in both directions.  I would like that changed so they give an A flat and A flat major on the pull, but still a D flat and D flat major on the push.  I can’t believe anyone would design an instrument with an E-flat row, 18 bass buttons, but not one pair of those 18 basses providing an A flat major chord and root on the pull.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Shops in the States for Repiar and Restorations
« Reply #27 on: December 06, 2013, 04:02:04 PM »

I’m glad you have the detached Venezia parts. It is hard to match some of the old components if they are missing. I would need to see the keyboard to determine the best approach to solve the button problems. Changing the bass notes and chords is pretty straightforward. I have many old Hohner zinc reedplates but if I don’t have the exact replacements I can order them or shift an existing reedplate a semitone to get you A flat.

We can work out arrangements via PM.

Scott
Logged
too many boxes...please buy one, or two, or
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal