Hi Andy
the usual rule of thumb for gapping harmonica reeds is to start with a gap which is the same size as the free end of that particular reed (which has exactly the effect you describe) and then adjust to suit your style of playing - the more aggressive your style, the wider the gaps you will need. Basically, I'd say that whatever works for you is OK, and (provided you proceed with care) gap choices are easily reversible, so you can afford to experiment. Remember though, that a reed is a spring, so you may set a gap and then find that the reed has reverted towards its starting point.
I don't overblow so can't comment on that with any confidence, but I have read that you need to narrow the gaps for that purpose. For *ordinary* bending on a Richter-tuned harp, I've seen it said that you should close down the 3 blow reed in order to facilitate the complicated series of 3 draw bends and I have found that this works for me on the rare occasions when I use Richter. But this isn't a relevant suggestion if you're using Paddies all the time.
hope this helps
cheers
Steve