Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Harmonica Reed Gaps  (Read 2401 times)

0 Members and 1 Guest are viewing this topic.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Harmonica Reed Gaps
« on: January 30, 2014, 07:25:56 PM »

Hi

Aware of the general rule that in a harmonica the higher pitched  reads should have a smaller gap than the low reeds

However I have also seen in some sources an aditional stipulation that in a diatonic harmonica the lower pitched of the two reeds in a shared channel should always be gapped wider than the higher reed. – Is this always the case?  Or is it only a specific requirement when setting up a harmonica for overblowing/bending?

I ask this as I only play Paddy Richterised harmonicas  - melodies in first position,without overblows or bending.

Thanks

Andy


Logged

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Harmonica Reed Gaps
« Reply #1 on: January 30, 2014, 08:03:06 PM »

Hi Andy
the usual rule of thumb for gapping harmonica reeds is to start with a gap which is the same size as the free end of that particular reed (which has exactly the effect you describe) and then adjust to suit your style of playing - the more aggressive your style, the wider the gaps you will need. Basically, I'd say that whatever works for you is OK, and (provided you proceed with care) gap choices are easily reversible, so you can afford to experiment. Remember though, that a reed is a spring, so you may set a gap and then find that the reed has reverted towards its starting point.

I don't overblow so can't comment on that with any confidence, but I have read that you need to narrow the gaps for that purpose. For *ordinary* bending on a Richter-tuned harp, I've seen it said that you should close down the 3 blow reed in order to facilitate the complicated series of 3 draw bends and I have found that this works for me on the rare occasions when I use Richter. But this isn't a relevant suggestion if you're using Paddies all the time.

hope this helps
cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Harmonica Reed Gaps
« Reply #2 on: February 08, 2014, 11:21:25 AM »

For the full bottle on harmonica setup, see the Hohner videos at http://us.playhohner.com/service/hohner-service/harmonica-service/
Logged
Harmonica Player
Just starting with the Box
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal