Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Balsa  (Read 4922 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Balsa
« on: August 18, 2014, 03:58:36 PM »

I recall Stormy Hyde talking about using a balsa sandwich for some of his boxes.  It sounds a good idea for lightening the overall assembly apart from the potential for denting the surface.  I was reminded as I was looking through this Club System website (http://www.delaguerre.com/delaguerre/pedagogy/club/care.html) and found the reference to the box being made mostly from balsa.  I guess this might explain the predominance of celluloid coverings?  It probably explains why classic Club models aren't that much heavier than a Pokerwork, despite the extra reeds and size.  The only time I've seen a Pokerwork "naked" it looked like it was made of a patchwork of beech scraps!  I believe some of the Oakwood models were ply panels, though some looked like solid timber.

Just an opening for discussion (boring day) - anyone have observations as to the use of materials in composite/veneered boxes?

Rob.
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Balsa
« Reply #1 on: August 24, 2014, 11:49:23 AM »

Hi
Oakwood use birch ply veneered with birdseye maple on some of their early boxes then went onto solid wood using walnut in some cases and I have had hold of a model 7 in Tiger Ash,felt heavy.
Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Balsa
« Reply #2 on: August 24, 2014, 12:11:25 PM »

I though most of a box's weight was in the reeds. It it really worth lightening, and presumably weakening the wood?  :|glug
Logged
  _       _    _      _ 

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Balsa
« Reply #3 on: August 24, 2014, 01:20:45 PM »

If you play seated, probably not. Standing, probably.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rileycat

  • Respected Sage
  • ****
  • Online Online
  • Posts: 429
Re: Balsa
« Reply #4 on: August 24, 2014, 01:51:51 PM »

I noticed that Kay Albrecht uses balsa in his reed blocks - http://aaccordion.com/2014/02/10/upcoming/
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Balsa
« Reply #5 on: August 24, 2014, 02:09:44 PM »

Some of Bernard Loffets boxes have veneered ply cases, its also used by some Italian makers.   Ply has a lot of advantages over solid timber, it can be stronger for a given weight, so a box can be lighter without compromising durability.  Ply is less prone to shrink,  warp or split.   Ply is common as the structural material in boxes that are finished in pearloid.

Its horses for courses.  Choice of material is a key part of the design process, so I don't think anyone could justify claiming that one material is better than another.  Of course a significant part of the design is to meet the expectations of customers, so if one material is more popular with customers then it may be substituted for another which might have had superior mechanical properties.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gurdypad3

  • Good talker
  • **
  • Offline Offline
  • Posts: 60
  • Gaillard D-G. Gaillard G-C.
Re: Balsa
« Reply #6 on: August 24, 2014, 03:19:32 PM »

...not sure if I understand this need for a lightweight instrument...is it not a fact that the weight can add something to the dynamics in ones playing?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Balsa
« Reply #7 on: August 24, 2014, 04:59:25 PM »

...not sure if I understand this need for a lightweight instrument...is it not a fact that the weight can add something to the dynamics in ones playing?
I would hazard a guess that you don't play standing up for extended periods of time playing for morris in its various forms, nor other English-style dance music where bellows-enhanced rhythmic drive is of fundamental importance. At festivals in particular, morris musicians usually have to lug their instruments about from one dance spot to the next throughout the day and a nice lightweight instrument for this is an added bonus.

It's also perfectly possible to have a great dynamic range from pp to ff in a lightweight instrument; in fact I would go as far as to say that it is easier on a light box, such as a Pokerwork, Lily or Tommy, etc.
:M
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

gurdypad3

  • Good talker
  • **
  • Offline Offline
  • Posts: 60
  • Gaillard D-G. Gaillard G-C.
Re: Balsa
« Reply #8 on: August 24, 2014, 08:57:43 PM »

...@ Steve;...IMHO ;)
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Balsa
« Reply #9 on: August 25, 2014, 11:52:56 AM »

Properly done, I doubt that using balsa as a core material would result in a weaker construction.  After all, yachts are often built with a balsa core with GRP skins bonded to it.  The usual analogy is an H section girder, where the outer edges provide the strength and the web simply spaces them to where the load is concentrated.  I don't know how apropriate this analogy is, though, in the casework of a box.  I would have thought that balsa is quite adequate to form the shape , its weknesses are in holding fasteners and crushing.  Whether you use a wood lamination or celluloid skin to toughen the surface it should do the job admirably - so long as fasteners are selected to minimise playing on the balsa's weaknesses.

Plywood is indeed stronger than solid timber as the plies are laid with grain opposed  to each other, also allowing a thinner section to be used.  The only down side is that people only use flat sections.  When you consider that Mosquitoes and landing craft were constructed in ply during WWII, it is a shame that the possibilities of laminating complex shapes is largely ignored in modern designs.  I guess this is born of the fact that plastics come to mind first in mouldings nowadays.  Many other great processes have fallen by the wayside over the years as well.  Fairey Marine continued wartime techniques for some years, moulding wooden boats, vacuum bagging them to infuse the waterproof glue into the wood and autoclaving (pressure cooking) the hull to ensure complete curing of the glue!  It died out due to cost on such a scale, but for a smaller item such as a meodeon it would make a really bullet proof case!  Fairey boats are still around, they don't rot and tend to bounce off anything they hit.

I have been doing a quick inspection of a number of older boxes recently and the reed blocks seem to be predominantly made of beech.  I like the idea of balsa reed blocks, though I suspect they'd fare better if varnished - I wonder whether wax holds well on a varnished surface or whether a manufacturer would have to use a gasket instead of wax.  Not that that is a disadvantage as it must surely simplify assembly, tuning and repairs when compared with working with a pot of molten wax?

The weight of free reed instruments is obviously greatly influenced by the weight of the reeds, but that isn't a reason not to minimise weight in other areas - why not make gains first where it is easiest?  Even worldwide we're looking at a niche marke,t so many good ideas will never see the light of day due to the cost of low volume production runs.  There are those who argue that the reed frames were better made in zinc and that aluminium is not sufficiently dense and neutral, prompting some hand made reeds to be offered on brass frames.  I wonder whether advances could be made using carbon fibre or an imitation stone composite, but I doubt anyone will ever tool up to try it.

Rob (bank holiday meanderings...)
Logged

The Blues Viking

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
Re: Balsa
« Reply #10 on: August 25, 2014, 07:37:30 PM »

Plywood is indeed stronger than solid timber as the plies are laid with grain opposed  to each other, also allowing a thinner section to be used.  The only down side is that people only use flat sections.  When you consider that Mosquitoes and landing craft were constructed in ply during WWII, it is a shame that the possibilities of laminating complex shapes is largely ignored in modern designs.

I used to work for the American Case division of Shar Products, making cases for violins, violas and cellos. The cases were made (predominately) from plywood that we made in-house in custom presses and often in very complicated shapes, especially for "fitted" cases that followed the general shape of the instrument. Each press consisted of a two-part mold that would form the plywood to its final shape under pressure.

Years later, a boatbuilder told me that we'd have done better to "vacuum bag" the plywood parts like they would a boat's hull, but I have my doubts about the practicality of this for a production run.

My point is, very complex shapes can and are being made in plywood, giving significant advantaged in both strength and ease of manufacturing. As I recall, though, the more complex shapes were made up of layers of veneer with grains at a right angle to each other while flat pieces of plywood were made with vertical-grained core.

The other common means of shaping plywood, soaking the finished plywood in water then pressing the wood into its final shape, I would not recommend since soaking tends to weaken the glue holding it together. And plywood glue (except, I suppose, for marine-grade plywood) is water-soluble. For that matter, so is wood, to some extent.

I believe that it is certainly possible to make melodeon parts in plywood using some sort of press, and that it can be done economically, and from what I know of the process it could work well for a small scale manufacturer. But I don't know, not with any certainty. Have any melodeon makers looked into this?

TBV
« Last Edit: August 25, 2014, 07:39:32 PM by The Blues Viking »
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Balsa
« Reply #11 on: August 26, 2014, 07:34:49 AM »

6 or 7 years ago I made the transition from solid wood to my own home-made plywood (to be used in the casings). There have been only advantages  (constructional, aesthetic, economic), both for my customers and myself.
« Last Edit: August 26, 2014, 09:01:57 AM by diatonix »
Logged

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Balsa
« Reply #12 on: August 27, 2014, 01:41:41 AM »

I wonder how far off we are from accordion components being 3D printed, the technology is there waiting to be used. Printing reed blocks should not be a major problem.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Balsa
« Reply #13 on: August 27, 2014, 08:52:52 AM »

.
    Printing reeds might be!
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Balsa
« Reply #14 on: August 27, 2014, 01:14:26 PM »

Hi
Oakwood use birch ply veneered with birdseye maple on some of their early boxes then went onto solid wood using walnut in some cases and I have had hold of a model 7 in Tiger Ash,felt heavy.
Pete
It's difficult to come up with a much lighter case than the veneered aircraft ply structure that Oakwood used, it's stronger so can be considerably thinner (5mm or maybe less?) than solid wood. You could use balsa with veneer skins but it wouldn't save much weight, the skins would probably have to be 1mm or so thick each to prevent denting so all you'd save would be a slightly lighter 2mm-3mm core.

If you really want strong and light you should look at something like carbon-fibre-skinned Rohacell, but you'd probably blanch at the cost -- and the difficulty of working with it, and making the corner joints, and fastening things like strap brackets to it...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Balsa
« Reply #15 on: August 27, 2014, 01:38:01 PM »

.
   My Oakwood was plywood, light as a CD wrapper and almost as tough ;)
   Three (11,10,9) rows; 12 basses … 3½kg! I could carry it on a little finger.
Logged
  _       _    _      _ 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Balsa
« Reply #16 on: August 27, 2014, 01:42:47 PM »

I'm not really advocating any particular material or method of construction.  Let's face it, I started musing 'cos it was a bank holiday and raining.  All the ply cases I've seen have been rather Hohner Pokerwork in design.  Not in itself a bad thing, but I'd prefer the more rounded shape of an Erica just for comfort of the LH and aesthetics.  It would be perfectly possible to mould such shapes in ply or carve them out of a light wood and veneer the finished body.  I suspect that the use of celluloid became almost universal as it allowed just such a construction and the skin was tough and strong so long as it remained adhered to the core material.  I guess the only cost effective change for low volume production would be to use an epoxy based layup for the skin, anything more exotic would be expensive and more difficult to work.  A box covered in epoxy/carbon fibre would look real cool though!  Incidentally, epoxy sheathing can be so translucent that it appears just like varnish on the underlying wood.

Foam coring is quite common in boats as well now.  Divinycell is commonly used within an epoxy layup.  Any weaknesses it has in such applications are normally connected with a water leak, causing the foam to disintegrate, so areas where fasteners are to be used are laid up solid.  Not such a problem with a box - it isn't usually expected to float (unless you're in the Sid...), but moulding wouldn't be simple to achieve an optically perfect finish.  I noticed though that the celluloid coverings don't finish perfectly after application and are scraped and buffed to achieve the required "perfection".  That should surely imply that our old boxes can be buffed back up to showroom condition?

Rob. (still rambling)
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Balsa
« Reply #17 on: August 27, 2014, 01:52:00 PM »

http://www.cstsales.com/carbon_sandwich_panel.html -- Rohacell and balsa cored!

On the other hand, you might end up with something that looks like this... :P

http://www.harmonika.com/en/accordions/modern/carbon

If you want rounded corners like an Erica, do what Oakwood did -- the box edges are solid wood with rebates for the ply panels, with the outer corners rounded over.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Balsa
« Reply #18 on: August 27, 2014, 05:10:11 PM »

...and are scraped and buffed to achieve the required "perfection".  That should surely imply that our old boxes can be buffed back up to showroom condition?

I've wondered about this. Anyone actually tried it?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Balsa
« Reply #19 on: August 27, 2014, 06:01:23 PM »

  All the ply cases I've seen have been rather Hohner Pokerwork in design.  Not in itself a bad thing, but I'd prefer the more rounded shape of an Erica just for comfort of the LH and aesthetics. 

Ericas are plywood, with solid wood corner blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal