Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Re facing pallets  (Read 12202 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Re facing pallets
« Reply #20 on: January 17, 2016, 01:50:08 AM »

Charlie sends stuff abroad including USA. No problem. Just send him an e-mail.
Yes I got some sent to USA no problem.

Contact cement you apply to both surfaces let dry to the touch, and no adjustments once the two surfaces meet.  hence the name
That may be what it tells you on the package instructions.
However, it is perfectly possible to use contact adhesive on a one-surface application and join the two parts immediately. There is a short adjustment time possible. This is a good method for attaching pallet facing to pallets as several of us on here, and also Charlie Marshall who sells the blimmin facing material, keep recommending.

I'm sure your right Steve, but contact cement is not really meant for porous material unless you put on two coats first one being a primer coat, as the first one gets absorbed by the wood. I would think bond strength would be compromised. Probably not a problem with pallet felt though. I can't see why any one would want to deal with messy (the stuff I use is very stringy)  contact cement if PVA does the same job. How do you put the contact cement on? With a brush while trying to hold the pallet and not get it all over your fingers? Or maybe you put it on the felt? I just spread the wood glue with finger then wash off said finger, no brush or tray & roller to dispose of.
I'm no expert here on pallets but being in the construction field I do know how to stick stuff together (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Re facing pallets
« Reply #21 on: January 17, 2016, 07:34:36 AM »

Mostly going to plan. Glue instructions do state use on one surface for absorbent materials by the way.

BUT - one of the keys I've bent now has a delayed reaction to being pressed - key moves a couple of mm before the pallet arm reacts. Have I fractured something?
Not panicking because it is on the half row - so I can live without it if it is easier just to ditch this key altogether (block it off). But it would be nice to know what the problem is likely to be.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Re facing pallets
« Reply #22 on: January 17, 2016, 07:40:23 AM »

The linkages on a couple of the accidental keys have more complex mechs, you may have bent something too far here - I`d take the top off the fingerboard and investigate , doesn't sound unfixable
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #23 on: January 17, 2016, 08:36:46 AM »

Contact cement you apply to both surfaces let dry to the touch, and no adjustments once the two surfaces meet.  hence the name
That may be what it tells you on the package instructions.
However, it is perfectly possible to use contact adhesive on a one-surface application and join the two parts immediately. There is a short adjustment time possible. This is a good method for attaching pallet facing to pallets as several of us on here, and also Charlie Marshall who sells the blimmin facing material, keep recommending.
I'm sure your right Steve, but contact cement is not really meant for porous material unless you put on two coats first one being a primer coat, as the first one gets absorbed by the wood. I would think bond strength would be compromised. Probably not a problem with pallet felt though. I can't see why any one would want to deal with messy (the stuff I use is very stringy)  contact cement if PVA does the same job. How do you put the contact cement on? With a brush while trying to hold the pallet and not get it all over your fingers? Or maybe you put it on the felt? I just spread the wood glue with finger then wash off said finger, no brush or tray & roller to dispose of.
I'm no expert here on pallets but being in the construction field I do know how to stick stuff together (:)

Perhaps your experience of 'contact cement' is different from what we are calling 'contact adhesive' (although I suspect not greatly different). All I can say is that the single surface application works very nicely for pallet facing. I've done it a good few times now and never had any problem either with messy, stringy, application or an insufficient bond strength. The pallet facings on the instrument which I first fixed 10 years ago are still in place and functioning perfectly.

Here's what I use.

You can see that the stuff comes in a tube. I squeeze a small blob on to the cleaned up wood surface of the pallet and then use a cocktail stick (one of my favourite all-purpose tools) to spread it thinly and evenly all over the pallet surface, working quickly but making sure I spread the glue right to the edges of the pallet. Then I press it down on to the felt backing of the facing. Once I've done all the pallets next to each other on the facing material, I cover the lot with a scrap piece of plywood and place several heavy books on top and leave for a couple of hours or so before separating the individual pallets using a sharp blade.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #24 on: January 17, 2016, 09:44:53 AM »

BUT - one of the keys I've bent now has a delayed reaction to being pressed - key moves a couple of mm before the pallet arm reacts. Have I fractured something?
Not panicking because it is on the half row - so I can live without it if it is easier just to ditch this key altogether (block it off). But it would be nice to know what the problem is likely to be.

Can't quite recall what instrument you are fixing - a Club 2 or Erika, I think?

I suspect the pallet lever arms are inserted and glued into a hole in the end of the wooden button arm. It's possible the lever arm is loose in the hole and/or you may have fractured the wood around the hole during your bending process. This will cause a sloppy delayed action as you've described. You may have to remove the keyboard or the top or bottom plate if it has these. Check to see if there is a loose arm or fracture on the offending lever. If so and it is in the wood, a drop of PVA glue and clamping the fracture closed should do the trick.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re facing pallets
« Reply #25 on: January 17, 2016, 10:02:46 AM »

Pete,  if you want to bring it round for some free advice please get in touch. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Re facing pallets
« Reply #26 on: January 17, 2016, 11:53:22 AM »

I suspect the pallet lever arms are inserted and glued into a hole in the end of the wooden button arm.

Steve, these boxes use a typical Hohner all steel action
Logged
Q: How do you cure MAD?
A: Buy more Boxes

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Re facing pallets
« Reply #27 on: January 17, 2016, 12:38:52 PM »

Thanks, all. Enjoying the restoration experience whatever the outcome. Theo, I'll bring reeds round in the near future, and perhaps we can have a look at the state of mechanics then. I appreciate the offer.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #28 on: January 17, 2016, 01:13:05 PM »

I suspect the pallet lever arms are inserted and glued into a hole in the end of the wooden button arm.

Steve, these boxes use a typical Hohner all steel action
I have worked on an early Club II (late 1920s?) which had the wooden button arms as I described. Unfortunately I didn't take any photos.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Re facing pallets
« Reply #29 on: January 17, 2016, 02:01:39 PM »

His box is an Erika with the removable celluloid top fingerboard - basically the same as my Club Modell II but with simpler more refined graphics and a hatched Gleichton button

The only old Hohner melodeons I`ve seen with wooden actions have also had the deep bellows frames and usually wooden grilles etc . as you say 1920s . I didn`t know they made Club-IIs then, I`m pretty sure there were no Erikas with that action (could be wrong of course) --- Paul ? - Triskel ?
« Last Edit: January 17, 2016, 02:06:46 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Re facing pallets
« Reply #30 on: January 17, 2016, 02:55:40 PM »

This is the Erika with Celluloid fingerboard. Just looked at the bass end, and seems to have shorter stockier arms to bend. Do they bend as easily - I was thinking that unscrewing the mechanism and raising the whole thing by the same thickness as the new pallet facing would be better than bending arms. Any advice on this suggestion?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re facing pallets
« Reply #31 on: January 17, 2016, 03:33:26 PM »

Bass end mechanism is easier to adjust than the treble, no need to pack up the mechanism fixing, which would bring its own problems.  Keep it simple!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Re facing pallets
« Reply #32 on: January 17, 2016, 11:49:34 PM »


The felt/persian leather composite from Charlie Marshall is indeed very fine. I fail to understand why others persist in trying to cobble together anything else when the very best materials are so readily available from this most trustworthy and reliable source.

Probably because Alex-C-Jones despite his very British sounding name is on the other side of the planet , Charlie can send the stuff overnight to us here (Miraculously fast in a lot of cases) but I can understand a reluctance to order to the USA (Time, Distance, cost, diminishing returns etc) ..

I use EVOstik for valves
Charlie sends stuff abroad including USA. No problem. Just send him an e-mail.
Yes, despite my English sounding name, I live in the US, near Chicago.  (The part of my family from which I get my surname emigrated from England in the 1640's).

Anyway, I would not have considered cobbling anything together if East Clare Box Player had not made it sound so easy, but if Charlie is used to selling and sending across the pond, (dealing with currency conversion and filling out that extra paperwork) then maybe it is more cost-effective (less risky) for me to just buy from him.

When I first read the instructions, I did not read them carefully enough, and thought that the felt side would be out and facing the soundboard.  But then I opened my Hohner and Venezia 2-Row boxes today to take a look.  The two noisier ones did not have any felt on any of the pallets.  The quieter one has the felt sandwiches described with the leather side facing the soundboard, so the felt is sandwiched between the pallet face and the leather.  (Bass side only--treble side has no felt).  So I read the instructions in this post again and see that is exactly what is described in this post.

The post by East Clare Box Player, (actually his response to another post), makes it sound like the leather side faces the pallet so the felt side hits the soundboard.  http://forum.melodeon.net/index.php?topic=7753.0.  I think that is what he is saying:
Quote
I always use the rough side of the leather toward the soundboard.  All the commercially available leather/felt sandwiches I've seen are rough-side out.  You want the grain side, which is smoother, to provide a better adhesive surface for the spray adhesive.
So it seems like he is using the adhesive to stick the leather side to the pallet.  But I will go with what Steve_freereeder stated in this post, and what the repair guy did on my HA-2814.

When I picked up the box from the repair shop (2 hour drive about 110 miles or 175 km from where I live) a few years ago after the modifications to stop the bass-side "castanets", I noticed that the button-heights were lower, but that is a good thing.  It reduced the travel distance of those buttons.  So if make the modifications on the bass side, and the button height is not too low to be functional, then I might skip adjusting the button height.  I like minimal button-travel.

But I do have a question here: Can someone recommend the best glue to use that is available in the USA, with some typical US brands, that I might likely to find in the local hardware store?  I referring to the glue for a fixing the felt to the pallet.  (We do have hot-melt glue guns here.)
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #33 on: January 18, 2016, 07:44:23 AM »

The post by East Clare Box Player, (actually his response to another post), makes it sound like the leather side faces the pallet so the felt side hits the soundboard.  http://forum.melodeon.net/index.php?topic=7753.0.  I think that is what he is saying:
Quote
I always use the rough side of the leather toward the soundboard.  All the commercially available leather/felt sandwiches I've seen are rough-side out.  You want the grain side, which is smoother, to provide a better adhesive surface for the spray adhesive.
So it seems like he is using the adhesive to stick the leather side to the pallet.  But I will go with what Steve_freereeder stated in this post, and what the repair guy did on my HA-2814.

Trust me - I've done this many times. You glue the felt to the wooden pallet. That way the leather forms the air-seal against the pallet board vents. If you do it the other way round, the felt will leak air like a rusty sieve.

But I do have a question here: Can someone recommend the best glue to use that is available in the USA, with some typical US brands, that I might likely to find in the local hardware store?  I referring to the glue for a fixing the felt to the pallet.  (We do have hot-melt glue guns here.)
Try these:

Suggestion 1

Suggestion 2

Suggestion 3 (I suspect this one may be PVA based, but that's OK)

Don't use hot melt glue to fix the facing material to pallets. You are unlikely to get a flat join and any resulting undulations prevent an effective seal and will leak air.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Re facing pallets
« Reply #34 on: January 18, 2016, 10:19:45 AM »

I wouldn't recommend option 2. It's an aerosol and will get everywhere, the dog glued to the floor. Wife stuck to the workshop door handle etc.  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re facing pallets
« Reply #35 on: January 18, 2016, 10:41:24 AM »

I'm amazed this discussion has gone on for so long for what is a simple process:

Clean old material off pallets
Use the right material
stick on with a a thin film of glue.  Apart from Copydex/latex almost any liquid glue that is easy to spread will work.



Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Re facing pallets
« Reply #36 on: January 18, 2016, 11:16:49 AM »

I wouldn't recommend option 2. It's an aerosol and will get everywhere, the dog glued to the floor. Wife stuck to the workshop door handle etc.  >:E

When Father papered the parlour,
You couldn't see Pa for paste,
He was slappin' it here, slapping it there,
Paste and paper everywhere...
Mother was stuck to the ceiling,
The kids were stuck to the floor.
You've never seen a bloomin' family so stuck up before.

I'm going to have that song in my head for days now!

Rob.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #37 on: January 18, 2016, 12:12:55 PM »

I wouldn't recommend option 2. It's an aerosol and will get everywhere, the dog glued to the floor. Wife stuck to the workshop door handle etc.  >:E
It's basically 'spray mount' - what we used for mounting photos, artwork etc. for montages. It's OK providing you take elementary precautions such as spreading newspaper sheets on the workbench. Lay the pallets a few at a time on the newspaper, spray the glue and immediately transfer the pallets to the facing felt (kept out of reach of the spray). Change the newspaper, add a fresh lot of pallets and repeat.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Re facing pallets
« Reply #38 on: January 18, 2016, 12:16:08 PM »

I'm amazed this discussion has gone on for so long for what is a simple process
Me too!  ::)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Re facing pallets
« Reply #39 on: January 18, 2016, 12:23:55 PM »

I wouldn't recommend option 2. It's an aerosol and will get everywhere, the dog glued to the floor. Wife stuck to the workshop door handle etc.  >:E

When Father papered the parlour,
You couldn't see Pa for paste,
He was slappin' it here, slapping it there,
Paste and paper everywhere...
Mother was stuck to the ceiling,
The kids were stuck to the floor.
You've never seen a bloomin' family so stuck up before.

I'm going to have that song in my head for days now!

Rob.

Snap!
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal