Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Building a non-acoustic box with new parts from the Hohner CShop  (Read 1309 times)

0 Members and 1 Guest are viewing this topic.

Lonnie

  • Member
  • *
  • Offline Offline
  • Posts: 25

Hi All,

I've started a little project where I'm trying to build a melodeon-shaped instrument (without reeds) using new parts from the German Hohner CShop.  I'm hoping to learn a bit about the practical mechanics of construction, and end up with an instrument that I can play through headphones and not annoy the rest of the house while practicing.  I'm trying out some carpentry at the same time.  It'll probably take me years to get anywhere - most of my projects take yonks.

If I can get the parts to fit together reasonably well at this simple level I might even try to make one with reeds one day.

There's a heap of parts in the "Accordion - Diatonic - Two row - Erica" section of the CShop website and I got the treble and bass keyboard mechanisms. Now realise I need the connection rods for the bass buttons, so they're on the way.  Will use some old bellows instead of new for the moment. Will try photointerruptors with the pallet arms as the interrupting vanes to detect button pushes.

For what it's worth, the parts took 22 days to be delivered to Victoria, Australia after being ordered online.

Cheerio then - Lonnie
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a non-acoustic box with new parts from the Hohner CShop
« Reply #1 on: October 17, 2014, 01:57:43 PM »

Interesting project - how do you plan to get the different notes on push and pull?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lonnie

  • Member
  • *
  • Offline Offline
  • Posts: 25
Re: Building a non-acoustic box with new parts from the Hohner CShop
« Reply #2 on: October 18, 2014, 02:38:11 AM »

Here's my rough push-pull plan.  Will be interesting to see how it survives first contact with the enemy.

1 - Non-pneumatic. Use a bellows-shaped block of soft, spongey foam. When compressed like a push, close a microswitch. When let go, or stretched like a pull, the microswitch is open. Very crude*, no expression, no expression.  No air button, no bellows limits.  Just trying to get a direction out of it for starters.

2 - With bellows. Use a couple of air pressure sensors; one outside the bellows to get the ambient level, one inside the bellows to detect higher or lower pressure. Use a single bleed hole to let air in and out. Add an air button valve (my first pallet!). First up, try to detect push-pull, then maybe some expression if sensitive enough. I don't even know if the sensor will react quickly enough to air pressure changes.  Lots to try.

3 - With bellows and pallets. Instead of a single bleed hole, try to add pallets in the normal position to the keyboard mechanism with tiny air holes beneath.  And so learn a bit about fixing and aligning pallets and felting.

*Not as crude as Uncle Kevin's cockatoo, though.

Logged

Vector

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Building a non-acoustic box with new parts from the Hohner CShop
« Reply #3 on: October 18, 2014, 03:57:42 AM »

sounds like a great project! Please post pics as you make your way along! It would be great if you could inspire others to DIY their own instrument projects!
Logged
chasing the tunes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal