Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Rebuilt and declubbed Hohner Modell II CF  (Read 1767 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Rebuilt and declubbed Hohner Modell II CF
« on: January 27, 2015, 05:34:03 PM »

OK, here is a rather poor quality video of my completed Hohner Modell II CF, declubbed, inlayed, and totally rebuilt.
http://youtu.be/-pVdFEbmklQ
« Last Edit: January 28, 2015, 07:30:38 AM by RogerThomas »
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #1 on: January 31, 2015, 12:55:16 PM »

I bet you're pleased with that box!  I've always found the club models to be of a superior build quality to today's offerings and they have far better set-up reeds, sounding readily (unlike my Chinese Pokerwork).  Why didn't Hohner offer such a tasteful veneering and ornamentation?

Rob.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #2 on: February 01, 2015, 01:13:43 PM »

Yes I am very pleased with it. It sounds great and plays wonderfully. I had a few issues with the inlay but got there in the end.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #3 on: February 01, 2015, 02:09:33 PM »

Fantastic Roger, indeed you must be very proud.
Why the problem with the inlay? I do assume you have a router.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #4 on: February 01, 2015, 02:35:22 PM »

Ah well..
I ordered 5mm inlay but when it came it was somewhere around 4.4 mm, so I had to swap the 5mm bit for 4mm and then carefully reduce the width of the inlay, which was a pain. Also, because it's an old box the sides aren't totally flat so the depth of the router cut wasnt as deep as it needed to be in some places. Then I had issues with increasing the depth without messing up the straightness of the cut. Finally, I had decided to stain the wood mahogany red, but of course the moment you start working stained wood you get back to the underlying unstained wood, so I'd made a straight-jacket for myself there too. Anyway, I got the inlay looking ok then masked it up (with low tack tape. (:)) and restained the wood. Finally getting a decent finish was a bit of a saga but I think I learned a fair bit in the process.
The declubbing, tuning up to 440, re-leathering the pads, stripping the reed blocks and revalving was the easy bit (except perhaps stripping the tape off the bellows) compared to getting the inlay to work.
« Last Edit: February 01, 2015, 02:38:52 PM by RogerThomas »
Logged

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #5 on: February 02, 2015, 01:37:59 AM »

Looks great. Shame to lose the original Hohner decals however...
Logged
Harmonica Player
Just starting with the Box

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Rebuilt and declubbed Hohner Modell II CF
« Reply #6 on: February 02, 2015, 08:28:14 AM »

Yes I agree, but it was in a bit of a state and I wanted to make a 'new' box from old. Frankly it looked like a piece of junk before. But I take your point.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal