Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Lowering button height evenly  (Read 1493 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Lowering button height evenly
« on: July 15, 2015, 05:22:50 PM »

I have a new Hohner Erica and I'd like to lower the height of the buttons on the treble side (lowering the distance that the buttons themselves stick out of the holes).  To be clear, I have no issue with button travel going down, meaning I don't mind them disappearing down the holes.  The button height on the new Hohners seems to be quite high...any reason for this, or advantage to it? The buttons on my old Hohner are considerably lower and I find them easier to play this way.

I've read through the forum on this topic and am clear on how to do this.  From what I understand, I will be removing the grill and then holding a pallet down while *gently* depressing the corresponding button to lower the height.  As someone else mentioned, there is some concern about getting the button height even across the board.  Is there any trick to this?  Having never done this, I don't want to end up with all the buttons at different heights.  I am wondering if anyone knows a way or has a method that they've used that works well.  I realize there may not be an easy answer, but just thought I'd check first before I started adjusting things!  Thanks!
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lowering button height evenly
« Reply #1 on: July 15, 2015, 05:46:07 PM »

I use two methods:
1) I cut a strip of wood that I can lay along the front facing surface of the buttons as a height gauge.
2) lay a straightedge along the tops of the buttons, though this isn't much help in avoiding a gradual change of height along the length of the row but it's a good secondary check after using method 1.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Lowering button height evenly
« Reply #2 on: July 15, 2015, 08:28:38 PM »

also worth mentioning the importance of a true perpendicular pressure, or you could also end up having to reset the pallet levers in the lateral plane. been there, done that.
like me buttons central in the holes.  :P
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lowering button height evenly
« Reply #3 on: July 15, 2015, 08:32:48 PM »

also worth mentioning the importance of a true perpendicular pressure, or you could also end up having to reset the pallet levers in the lateral plane. been there, done that.
like me buttons central in the holes.  :P

Having adjusted many many Hohner buttons I have found it almost inevitable that the buttons will displace laterally and need adjusting as well.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Lowering button height evenly
« Reply #4 on: July 15, 2015, 09:11:25 PM »

Good to know, Lester.  How do you recommend making a lateral adjustment when needed?
Logged
C#/D player

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lowering button height evenly
« Reply #5 on: July 15, 2015, 09:17:13 PM »

Good to know, Lester.  How do you recommend making a lateral adjustment when needed?

I have a pair of bent nosed pliers which allows me to adjust the button lever by inserting the bend through the back of the keyboard.

http://www.amazon.co.uk/dp/B00024AT8M/ref=sr_1_20?s=diy&ie=UTF8&qid=1436991201&sr=1-20
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal