I have a new Hohner Erica and I'd like to lower the height of the buttons on the treble side (lowering the distance that the buttons themselves stick out of the holes). To be clear, I have no issue with button travel going down, meaning I don't mind them disappearing down the holes. The button height on the new Hohners seems to be quite high...any reason for this, or advantage to it? The buttons on my old Hohner are considerably lower and I find them easier to play this way.
I've read through the forum on this topic and am clear on how to do this. From what I understand, I will be removing the grill and then holding a pallet down while *gently* depressing the corresponding button to lower the height. As someone else mentioned, there is some concern about getting the button height even across the board. Is there any trick to this? Having never done this, I don't want to end up with all the buttons at different heights. I am wondering if anyone knows a way or has a method that they've used that works well. I realize there may not be an easy answer, but just thought I'd check first before I started adjusting things! Thanks!