Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Middle reed not tuned to 0 offset  (Read 11591 times)

0 Members and 1 Guest are viewing this topic.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Middle reed not tuned to 0 offset
« on: November 17, 2015, 04:32:07 PM »

I have just measured the tuning on the MM reeds on my Baffetti Carnival II, Hohner Student accordion and Pigini accordion (all, as far as I know, untouched since the factory). I was surprised to find that the straight-tuned middle reeds on the Pigini and Baffetti were themselves offset to around +8, with the M+ reeds then being offset from there; the middle Hohner set were at (essentially) zero.

Why would this be, and is it common practice (with Italian boxes)? And is it better to have  the middle M on zero (setting aside the Dedic tuning argument for the moment).

And there has been me thinking our recorder player's instrument at morris was flat.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #1 on: November 17, 2015, 05:23:59 PM »

There seems to be an increasing practice of tuning to a sharp standard, either at, or approaching, A=442 Hz.
This is particularly the case with some modern European and Japanese wind instruments, made in the last 20 years or so. The rationale behind it seems to be the quest for a brighter orchestral sound. I think the tuning of accordions and melodeons is reflecting this insidious nudging upwards of the standard pitch too, in order to make a more cutting sound.

Personally I deplore this, as it is beginning to restart the 'pitch wars' of the early and mid 20th century where professional wind players (whose instruments were not easily adjusted to a different pitch standard) had to equip themselves with different instruments for different countries. The current so-called international pitch standard of A=440 was brought in (I believe) in the 1930s to alleviate the chaos. It worked for many years but it is now being flouted once more  :(

My own orchestra tunes nominally to A=440, but I need a specially designed mouthpiece to play my French-made clarinets down to that pitch.
I note that American orchestras still abide by the A=440 standard, thank goodness.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Middle reed not tuned to 0 offset
« Reply #2 on: November 17, 2015, 05:50:03 PM »

That's interesting. The Pigini and Baffetti are both around 8-10 years old, and the Hohner is from the 1960s.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Middle reed not tuned to 0 offset
« Reply #3 on: November 17, 2015, 06:00:37 PM »

Nearly all of the  Baffettis I've worked on and most of the Saltarelles are tuned to A=442Hz which is equivalent to about 8 cents sharp, it's been the default fir quite a long time for those makes. Castagnari seem to stick to 440.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Middle reed not tuned to 0 offset
« Reply #4 on: November 17, 2015, 06:02:32 PM »

Logged

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Middle reed not tuned to 0 offset
« Reply #5 on: November 17, 2015, 06:13:11 PM »

Nearly all of the  Baffettis I've worked on and most of the Saltarelles are tuned to A=442Hz which is equivalent to about 8 cents sharp, it's been the default fir quite a long time for those makes. Castagnari seem to stick to 440.

If one were to be getting a Baffetti tuned anyway (eg as a result of converting it to 4th button start) would it be better overall to centre it on A440 or continue with the original 442?

Do fiddlers, for example, complain about these boxes at 442 like we hear they do if a melodeon is not Dedic tuned?

In fact the whole sharp tuning thing seems to go against the argument behind Dedic tuning. Is there a "brightness" issue?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Middle reed not tuned to 0 offset
« Reply #6 on: November 17, 2015, 08:06:47 PM »

Italian manufacturers/tuners want the reeds in their instruments to look as untouched as possible. This may at least in part explain the general tendency to tune sharp.
Logged

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Middle reed not tuned to 0 offset
« Reply #7 on: November 17, 2015, 08:24:40 PM »

There is a local player with a Baffetti tuned to 444.  The idea seems to be that he can squeeze the hell out of it and drown out everybody else in the room without going flat, or else just stand out over everyone else by being way sharp.

It sounds hellacious and I just beat it when I see him coming.
« Last Edit: November 17, 2015, 11:23:46 PM by Jack Campin »
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Middle reed not tuned to 0 offset
« Reply #8 on: November 17, 2015, 08:29:51 PM »

Yes the 442 (and higher) pitches are basically a musical arms race. Avoid if you can.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #10 on: November 17, 2015, 10:20:06 PM »

If one were to be getting a Baffetti tuned anyway (eg as a result of converting it to 4th button start) would it be better overall to centre it on A440 or continue with the original 442?

Do fiddlers, for example, complain about these boxes at 442 like we hear they do if a melodeon is not Dedic tuned?

In fact the whole sharp tuning thing seems to go against the argument behind Dedic tuning. Is there a "brightness" issue?

I always tune the core pitch to A=440. So if tuning to Viennese /Dedic method, I tune M- and M+ equal amounts either side of equal temperament based on A=440. Colin Dipper (concertina maker) tunes to A=440.

All the fiddle players I know tune to A=440 using an electronic tuner, and yes, they've been known to complain about bright-sounding, wet-tuned Hohners being 'out of tune'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Middle reed not tuned to 0 offset
« Reply #11 on: November 17, 2015, 10:41:47 PM »

Also see here:
http://members.aon.at/fnistl/page3.html
That's a nice list. It shows that England (but not Scotland) tends to tune 2 to 4 Hz below the rest of the world. (:)
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Middle reed not tuned to 0 offset
« Reply #12 on: November 18, 2015, 09:57:47 AM »

I have just increased the tremolo on my Baffetti Carnival II to about 18 cents (the Celeste profile in Benetoux's tuning book). I did this by flattening the lower reed to bring it down to A440 (where it belongs) (:) and then tuning the bass to same (the bass was a bit here and there). Obviously a matter of personal taste but it does all sound much better now, esp as most Baffettis I've heard in the UK tend to be dryish tuned (and sharp). Will post a demo vid.

Ed: though of course it still sounds a bit sharp (:)
« Last Edit: November 18, 2015, 10:03:17 AM by RogerThomas »
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Middle reed not tuned to 0 offset
« Reply #13 on: November 18, 2015, 10:48:03 AM »

the FFT on my iPad says the "A"s on the blue (yup, found a blue one!) box I've just laparotomised are at 438 and 442, give or take a bit of wobble.

One voice is going to be stopped out. So for a "blues" machine do I take the other to 440?

… I am unlikely to be playing Blues with Colin Dipper 😉
« Last Edit: November 18, 2015, 10:51:01 AM by Chris Ryall »
Logged
  _       _    _      _ 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Middle reed not tuned to 0 offset
« Reply #14 on: November 18, 2015, 11:29:21 AM »

Oh boy, Chris, you've opened a can of worms there!  I suppose a blues harp is frequently overblown to flatten the pitch, so A=440 would be a better starting point, but should you go to Cajun tuning or maybe some other comma?  Earl Scruggs famously invented cam levers to allow instant retuning of his banjo in full flow.  Perhaps the levers could have an accessory to only crack the pallet open so you can bend notes?  Bending on a tremolo two-voice sounds rather like a piper tuning the drones, though...

Rob.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #15 on: November 18, 2015, 11:31:12 AM »

the FFT on my iPad says the "A"s on the blue (yup, found a blue one!) box I've just laparotomised are at 438 and 442, give or take a bit of wobble.

That setting is the basis for a Viennese/Dedic tuning to give a perceived pitch of A=440 with a 4 Hz tremolo. The perceived pitch, i.e. what the ear/brain thinks it is hearing, is the arithmetic mean of the two component frequencies. The tremolo rate is the difference between the frequencies. 

Quote
One voice is going to be stopped out. So for a "blues" machine do I take the other to 440?

If you take out one of the voices, you immediately lose the tremolo and the perceived pitch becomes equal to the actual pitch of the remaining reeds. So if you want to the tuning to be at A=440 standard, you will need to retune the reeds which were tuned to the previous settings. My choice would be to blank off the 438 reeds and flatten the 442 reeds, the rationale being that it is generally easier to flatten reeds than to sharpen them.

Of course, you could always leave the unstopped reeds at A=442 standard and be playing sharp all the time (or vice versa).

Quote
… I am unlikely to be playing Blues with Colin Dipper 😉

Maybe not, but you might find yourself playing with other instruments tuned to A=440 standard.  8)

Also, you need to consider the LH basses and chords. It's possible, on the instrument which you describe, that these have been tuned to A=440 in order to be in tune with the perceived A=440 of the treble end. If you don't retune your treble end after stopping off of one of the voices, the LH and RH ends will no longer match, and with no tremolo on the RH side the mismatch may be distinctly noticeable :o .
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Middle reed not tuned to 0 offset
« Reply #16 on: November 18, 2015, 12:24:34 PM »

Oh boy, Chris, you've opened a can of worms there!  I suppose a blues harp is frequently overblown to flatten the pitch, so A=440 would be a better starting point, but should you go to Cajun tuning or maybe some other comma?  Earl Scruggs famously invented cam levers to allow instant retuning of his banjo in full flow.  Perhaps the levers could have an accessory to only crack the pallet open so you can bend notes?  Bending on a tremolo two-voice sounds rather like a piper tuning the drones, though...

Rob.

Or maybe a thumb button to open/close a register to restrict the air and thusly (in principle) bend the note.

nigelr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
Re: Middle reed not tuned to 0 offset
« Reply #17 on: November 18, 2015, 05:46:00 PM »

Nearly all of the  Baffettis I've worked on and most of the Saltarelles are tuned to A=442Hz which is equivalent to about 8 cents sharp, it's been the default fir quite a long time for those makes. Castagnari seem to stick to 440.
According to Audacity (the only tuning/pitch software I have access to) my DB Oakwood Super 2 is bang on A=440Hz.  I suppose this could be part of what is done to them post leaving the factory and would imply a Dedic tuning (?)
Logged
DB Oakwood Super 2 (D/G), Club II (D/G Will Allen layout), Erika (Bb/Eb) and an HA114 in C

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Middle reed not tuned to 0 offset
« Reply #18 on: November 18, 2015, 06:10:15 PM »

If they are not dry tuned yes, though I prefer the term Vienese tuning. The second part of Ian D's tuning is the constant beat rate across the range, that is not the case with Vienes tuning in general.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nigelr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 526
Re: Middle reed not tuned to 0 offset
« Reply #19 on: November 18, 2015, 06:43:00 PM »

If they are not dry tuned yes, though I prefer the term Vienese tuning. The second part of Ian D's tuning is the constant beat rate across the range, that is not the case with Vienes tuning in general.
The box is not dry tuned, so I thought there must be some sort of +/- thing going on.  Having messed around with working up and down the scales, the waveform (and my ears) definitely imply the beat rate increases with pitch, so I will go with "Viennese".  Learnt something new today (:)
Logged
DB Oakwood Super 2 (D/G), Club II (D/G Will Allen layout), Erika (Bb/Eb) and an HA114 in C
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal