Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Middle reed not tuned to 0 offset  (Read 11600 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Middle reed not tuned to 0 offset
« Reply #20 on: November 18, 2015, 09:21:54 PM »

1. thanks for the tip to flatten rather than sharpen. Will change my strategy.
     Also to check the bass end, though that is going unisonoric …

2. i don't know of a register to flatten/bend notes. I open the valve "very slightly"
    and pull hard, and can get over a semitone bendYou can do it on push too,
    but not so easy. The decision to go single voice was influenced by this too.
    I find I can bend LM bandonèon only slightly. Anything tremelo "locks in"

3  440 as "perceived" from 438+442 is not quite correct? The actual pressure
    curve is 440, with 2 Hz modulation. It's in the maths of how waves combine.

         sin A + sin B = 2 x  sin (A+B)/2  x  cosine (A-B)/2

     Right to look at it either way, but that is the pressure curve. Of course in real
     instruments the reeds may interact as well, depending on their coupling.

4. Cannot imagine Colin playing blues! John … maybe. Especially after last year

Am currently trying to get my granddad's small files off my son …  ;)
« Last Edit: November 18, 2015, 09:23:33 PM by Chris Ryall »
Logged
  _       _    _      _ 

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #21 on: November 19, 2015, 12:57:06 AM »

440 as "perceived" from 438+442 is not quite correct? The actual pressure
    curve is 440, with 2 Hz modulation. It's in the maths of how waves combine.

         sin A + sin B = 2 x  sin (A+B)/2  x  cosine (A-B)/2

     Right to look at it either way, but that is the pressure curve. Of course in real
     instruments the reeds may interact as well, depending on their coupling.

The beat frequency fb is the amplitude modulation frequency caused by the interference of two periodic waves of frequencies f1 and f2 such that fb = |f1 - f2|.

See here: https://en.wikipedia.org/wiki/Beat_(acoustics)

Therefore in the case of two reeds sounding at 442 and 438 Hz, the beat frequency is 442 - 438 = 4 Hz

I believe the 'perceived pitch' of two mis-tuned free reeds is difficult to pin down mathematically; acoustics, audio-physiology and psychology all seem to be interacting here. I think much depends on the harmonics spectrum of the notes produced as well as the actual difference between the two reed frequencies. When that difference becomes relatively large (think very, very wet musette, and then go wetter still) there comes an ill-defined point when what the ear/brain perceives changes from a note with a fast tremolo to an out-of-tune, discordant, mush. Where that point comes is rather subjective, which I guess is partly why some of us like wet tuning and some of us can't stand it.  :Ph

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Middle reed not tuned to 0 offset
« Reply #22 on: November 19, 2015, 10:15:35 AM »

With you on "perception" when they go out of tune. If the frequncy difference gets into 10s it becomes more of a wobble than a vibrato - my own ear perception seems to flip from one to the other and "pitch" is hard to hear. Well, it actually isn't there.

But the maths still holds - just that the combination modulated wave is messy (there are of course also harmonics interfering in there.

Nice analogy is the old school "two slits" with a laser coming at them. We perceive a fan of light beams? No - interference has happened and these are now separate beams. In ultrasound that is how a beam is steered nowadays. And in quantum physics … you get the beam effect even if you fire single photons at the slots. Now that IS spooky?
« Last Edit: November 19, 2015, 10:25:43 AM by Chris Ryall »
Logged
  _       _    _      _ 

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #23 on: November 19, 2015, 07:20:34 PM »


But the maths still holds - just that the combination modulated wave is messy (there are of course also harmonics interfering in there.


This describes and illustrates perceived frequency and beat frequency rather nicely. Scroll down to the section entitled 'Two sine waves with different frequencies: beats':
http://www.acs.psu.edu/drussell/Demos/superposition/superposition.html

The maths demonstrates that the beat frequency is indeed a cosine wave which modulates the amplitude of the perceived pitch wave fp = (f1 + f2)/2. The cosine wave frequency is (f1 - f2)/2, which describes the overall amplitude curve which has one maximum positive value (ymax +) and one maximum negative value (ymax -) in a single cycle. That means there are two maximum amplitude values per cycle of frequency difference, which is what the ear perceives as a beat frequency. 

So, in the example of 438 and 442 Hz waves sounding together, although the cosine curve modulating the amplitude goes through 2 cycles, there are actually 4 maxima (two positive and two negative) in those two cycles, which is what the ear hears as beats - our ears can't distinguish between positive and negative maxima; they are just maxima, i.e. beats.  Therefore the beat frequency is, as previously mentioned, fb = |f1 - f2| and not |f1 - f2|/2

Phew!  :Ph  Enough!

PS: I'm sure we discussed this, with the maths, on the forum a couple of years ago. Anahata chipped in too, IIRC.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Middle reed not tuned to 0 offset
« Reply #24 on: November 20, 2015, 05:09:24 PM »


But the maths still holds - just that the combination modulated wave is messy (there are of course also harmonics interfering in there.


This describes and illustrates perceived frequency and beat frequency rather nicely. Scroll down to the section entitled 'Two sine waves with different frequencies: beats':
http://www.acs.psu.edu/drussell/Demos/superposition/superposition.html

The maths demonstrates that the beat frequency is indeed a cosine wave which modulates the amplitude of the perceived pitch wave fp = (f1 + f2)/2. The cosine wave frequency is (f1 - f2)/2, which describes the overall amplitude curve which has one maximum positive value (ymax +) and one maximum negative value (ymax -) in a single cycle. That means there are two maximum amplitude values per cycle of frequency difference, which is what the ear perceives as a beat frequency. 

So, in the example of 438 and 442 Hz waves sounding together, although the cosine curve modulating the amplitude goes through 2 cycles, there are actually 4 maxima (two positive and two negative) in those two cycles, which is what the ear hears as beats - our ears can't distinguish between positive and negative maxima; they are just maxima, i.e. beats.  Therefore the beat frequency is, as previously mentioned, fb = |f1 - f2| and not |f1 - f2|/2

Phew!  :Ph  Enough!

PS: I'm sure we discussed this, with the maths, on the forum a couple of years ago. Anahata chipped in too, IIRC.

Except that the waveform generated by a free reed is nowhere near a sinewave because of all the harmonics -- which of course have beat rates higher than the fundamental -- it has sharper peaks where the pressure peaks from the "chopped" airstream are.

If you look at the waveform of two tremolo reeds on a scope (triggered by the mean frequency) and squint, you can sometimes see the peaks of one reed waveform moving to the left and the peaks of the other moving to the right. Your ear still hears the beat frequency of the fundamentals because this is how often the waveforms slide past each other.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #25 on: November 20, 2015, 05:44:45 PM »


Except that the waveform generated by a free reed is nowhere near a sinewave because of all the harmonics...

Yes, indeed; understood. But one has to start somewhere with any analysis.  :Ph

Quote
If you look at the waveform of two tremolo reeds on a scope (triggered by the mean frequency) and squint, you can sometimes see the peaks of one reed waveform moving to the left and the peaks of the other moving to the right. Your ear still hears the beat frequency of the fundamentals because this is how often the waveforms slide past each other.

You can sometimes see this effect on a strobe tuner too. With a slow tremolo, the strobe bars sometimes appear to move slowly one way and then the other as each waveform is picked up.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

GuyWyatt

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 303
Re: Middle reed not tuned to 0 offset
« Reply #26 on: November 21, 2015, 10:49:05 AM »

Now all of this illustrates why i just take a box to someone who knows what they are at and say "please make it sound nice".
Logged

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Middle reed not tuned to 0 offset
« Reply #27 on: November 21, 2015, 11:07:56 AM »

Still, its fun to watch the techies dive down a rabbit hole  (:)
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #28 on: November 21, 2015, 01:31:31 PM »

Still, its fun to watch the techies dive down a rabbit hole  (:)
Oh - but the rabbit hole is nice and cosy. You should try it sometime.  ;)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Middle reed not tuned to 0 offset
« Reply #29 on: November 21, 2015, 02:07:23 PM »

With you on "perception" when they go out of tune. If the frequncy difference gets into 10s it becomes more of a wobble than a vibrato - my own ear perception seems to flip from one to the other and "pitch" is hard to hear. Well, it actually isn't there.

But the maths still holds - just that the combination modulated wave is messy (there are of course also harmonics interfering in there.

Nice analogy is the old school "two slits" with a laser coming at them. We perceive a fan of light beams? No - interference has happened and these are now separate beams. In ultrasound that is how a beam is steered nowadays. And in quantum physics … you get the beam effect even if you fire single photons at the slots. Now that IS spooky?

Anyone else remember the Kippers' "Tremolodeon?" It made oi larff...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Middle reed not tuned to 0 offset
« Reply #30 on: November 21, 2015, 03:21:47 PM »

There seems to be an increasing practice of tuning to a sharp standard, either at, or approaching, A=442 Hz.
This is particularly the case with some modern European and Japanese wind instruments, made in the last 20 years or so. The rationale behind it seems to be the quest for a brighter orchestral sound. I think the tuning of accordions and melodeons is reflecting this insidious nudging upwards of the standard pitch too, in order to make a more cutting sound.

Tuning "a bit sharp," especially for a soloist to stand out above the other instruments, is nothing new, and it's something Italian accordion makers have been doing for a long time. Both my 1950's Paolo Soprani boxes are in unaltered factory tuning and the c.1956 D/D# (made for the British and Irish market) is at 442, whilst the single-row "pepperpot grille" one (made for the Chicago, USA market) is at 444.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Middle reed not tuned to 0 offset
« Reply #31 on: November 21, 2015, 03:36:21 PM »

Oh boy, Chris, you've opened a can of worms there!  I suppose a blues harp is frequently overblown to flatten the pitch, so A=440 would be a better starting point, but should you go to Cajun tuning or maybe some other comma? 

Blues harps are (or should be!) tuned to Just Intonation, and I'd heartily recommend the website of my (online) friend the harmonica tech. Pat Missin on that subject: Tuning and the Harmonica

"Cajun tuning" is only a very limited and rough approximation of Just Intonation.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Middle reed not tuned to 0 offset
« Reply #32 on: November 21, 2015, 05:04:29 PM »

Thanks - very useful stuff, and something I'd … sort of expected. I can only hear difference where 4th is involved  ::) yup, that includes the chords (:)

My poor, unsuspecting, undefended BC :'( is currently on the operating table - and I think I'll stay with =temp for now. I really don't know what keys will work, which not, and then have to imagine, and construct some sort of left end to suit.   

I may well go "just" later on - it seems a tweak rather than a major retune issue.
Logged
  _       _    _      _ 

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Middle reed not tuned to 0 offset
« Reply #33 on: November 21, 2015, 06:17:28 PM »

My poor, unsuspecting, undefended BC :'( is currently on the operating table - and I think I'll stay with =temp for now. I really don't know what keys will work, which not...

You're probably best-off doing that for now, until you've tried it out and seen how it works - and, of course, a B/C is (at least in theory) much closer to a chromatic harmonica than a blues one, and chromatic harmonicas are always tuned ET anyway.

Quote
I may well go "just" later on - it seems a tweak rather than a major retune issue.

Just is only really suitable along a single row, so not really suitable for a "normal" B/C (unless, like some of the oldtime players, you are going to play it only "along the rows" in B and C).

But Meantone might work for you, depending on what keys you want to play in - for example you can tune a B/C box to play beautifully in C, D, G and A, but it'll sound horrible along the straight B row...  ???

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Middle reed not tuned to 0 offset
« Reply #34 on: November 22, 2015, 02:57:05 AM »

Anyone else remember the Kippers' "Tremolodeon?" It made oi larff...

Its unusual warbling was thought to date from the impact damage sustained as it was passed down from old Ephraim, at an upstairs bedroom window, to Henry who was running away from Dots Father, all on em having had a skinfull or two, it missed the back of Henry's head and caught his future father in law's wooden leg - Mrs Dace's Emporium not having a squeeze box section, the best she could do (at the sort of credit lengths customers like the Kippers managed to extend) was some secondhand elastic from an old-stock pair of combinations, nothing like springs really and the result has gone into the Black Museum of acoustic and freeish reed history.

As to the current location of the infamous instrument, posterity appears to be silent, but with St Just now demolished as a health, hygiene and moral hazard as part of the extensive Dumb Down Norfolk Heritage and Build Houses All Over It scheme, 'We may never hear the like again'  opinion locally is divided as to this being A Good Thing or A Bad Thing.  ;) You are not alone in your nostalgic laughter Ian, second best to live but thank heavens for the bright needle which tracks the wandering groove.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Middle reed not tuned to 0 offset
« Reply #35 on: November 22, 2015, 07:50:16 AM »

Richard - I love it, but sometimes I do wonder just what is in your pipe baccy.  >:E
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Middle reed not tuned to 0 offset
« Reply #36 on: November 22, 2015, 02:04:28 PM »

Richard - I love it, but sometimes I do wonder just what is in your pipe baccy.  >:E
Probably the same thing as in Tony Hall's... ;-)

[and I only ever saw the Tremelodeon live once, I nearly wet myself]
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Middle reed not tuned to 0 offset
« Reply #37 on: November 22, 2015, 04:06:11 PM »

Saw Dick do Tremelodeon with Kathryn Tickell at Whitby, in the 1980's - looked lke she almost wet hersef as well.  Not sure she's expected it.
Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Middle reed not tuned to 0 offset
« Reply #38 on: November 23, 2015, 02:43:32 AM »

Richard - I love it, but sometimes I do wonder just what is in your pipe baccy.  >:E

Just baccy Steve, alcoholic liquid, not even had a horseradish whine since the excellent pints at Potty Festival, now as to what might be leaking from my solvents cabinet in the workshop I can't be as certain. It's a long time since I used to drink in Tony's local Ian, but his pipeweed then was as ordinary as mine.

The fact that a longtime friend with whom I share a 'certain' sense of humour was from the same school, chapel, chapel camping holidays etc. as Dick and Chris and of a very similar disposition, may indicate a commonality of thinking on humour. It used to crack him up that they would never break character, even momentarily with him.

Strangely, while not in general contact with her, I've just been copied in on an email from Molly - Dick's former wife - I could ask if she knows anything about the infamous box should there be any interest. Since Chris' retirement his website appears to have gone, hopefully that is not indicative of further illness, or worse.

A bit like the Goons and their topical references, the Kippers were just so brilliant with their base material, as I explore more folk music I find new lyrics or tunes where I suddenly realise that I heard it first from the Kippers, tis a crying shame there doesn't appear to more in the way of video of their joint performances - at least Sid's broadcast work is safe - in addition to Radio 2 he was a regular member of the peripatetic Radio Norfolk 'high days and holidays' antidote to panel games 'Should the Team Think', along with local dialect activist Keith Skipper.

So do we have any fettlers who offer a kippering service on Pokerworks? I guess the tremulating is done by some sort of unstable sprung windchest or bleed valve into the reedbank ? it seemed to operate independently of the pallets - but was it a standard box made like that in the year Dot or something they had 'created'.


Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Middle reed not tuned to 0 offset
« Reply #39 on: November 23, 2015, 05:29:48 AM »

I guess the tremulating is done by some sort of unstable sprung windchest or bleed valve into the reedbank ? it seemed to operate independently of the pallets - but was it a standard box made like that in the year Dot or something they had 'created'.

It's called a "vox humana" stop, not uncommonly found on reed organs and some melodeons. In a melodeon it's achieved by means of two weighted flaps (one on't press, t'other on't draw) which open and close repeatedly as air passes through them.

You get other odd "effects" on melodeons too - I've got one by Wilhelm Spaethe that has a vox humana on the treble side, along with a cock-crow, birdwhistle and cuckoo on the bass. Just think of the fun Sid Kipper could've had with that lot!  :D
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal