Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Brass reed plates or aluminium  (Read 2366 times)

0 Members and 1 Guest are viewing this topic.

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Brass reed plates or aluminium
« on: June 05, 2009, 09:43:25 AM »

Hi,
Does anyone have advice and what sound differences there are.

many thanks :|||:
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Brass reed plates or aluminium
« Reply #1 on: June 05, 2009, 04:52:06 PM »

  Hi,  Does anyone have advice and what sound differences there are.     many thanks :|||:     

    I have two Beltuna one-rows; one in "Re" and one in "La".  Both have brass reed plates.  I never had a chance to try the same instrument with alu but the brass plated reeds have a wonderful, rich tone quality.  (Of course, some of this might come from the fact that they're a little finicky to set up so they get more "hand-work" quality attention than the average reed set.)
Logged
I love one-rows!  Four reeds kick butt!!!!

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Brass reed plates or aluminium
« Reply #2 on: June 06, 2009, 10:38:21 AM »

Generally speaking, I found a few things to be true about the difference between the two types of reeds.

I've found that the brass plate reeds tends to have a somewhat softer tone, yet with lots of power. A more "woody" tone, if that makes sense. As opposed to the alu plate reeds, that are a little sharper, more metallic in tone. I personally prefer the latter for most boxes, but I've had a few boxes that sounded better with brass frame reeds.

The difference lies in the materials characteristics. The brass is harder than aluminium, and allows the tone to travel better without losing overtones or power. At the same time, it's harder and heavier, which also has an effect on the tone.

I got some brass plate reeds about a year ago for a box, and the tuning showed much of the above in real life: When dry tuned (less than 5 cents) the tone was not great. Too much characteristic, if you know where I'm heading. BUT: When I got to the 15 cents, the overtones didn't cluster, and the reeds really pushed some sound out of the box.

Alot of the older reeds on brass plate (1920's and 1930's) that I've come across were not top-notch. This was due to the tongue being too soft to produce a strong note without peaking in potential. I have seen some old reeds which was absolutely great, though.

There's a lot of modern reedmakers that has the option of brass plate reeds, but it's all a question about the box you'd want to put them into. How's the sound of the box (not the tuning, not the reeds, but the SOUND character of the box), how do you want to have it tuned, etc.

This may sound a little complicated, but for some boxes brass plate reeds will be the best choice. At least, that's MY opinion:)
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Brass reed plates or aluminium
« Reply #3 on: June 07, 2009, 03:31:08 AM »

I have an 1880's 2 1/2 row German made box in D and G with handmade reeds on brass reed plates

The lower reeds are all bandonion reeded and from about button 5 and higher they are unison reeded.


The instrument is bright without being brittle
projects very well
Very clear notes
a little heavier than a box with aluminum framed reeds
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal