Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Binci vs. DIX bass reeds  (Read 8314 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Binci vs. DIX bass reeds
« Reply #20 on: April 26, 2016, 12:55:17 PM »

Ah, thanks Brian.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Phil B

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Binci vs. DIX bass reeds
« Reply #21 on: April 26, 2016, 01:26:18 PM »

Rees, Before some pesky customer persuades you to part with this box for gold can we have a sound file please?
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Binci vs. DIX bass reeds
« Reply #22 on: April 26, 2016, 04:58:27 PM »

Quote
I've just checked the Harmonikas website. They do offer three grades of A Mano reeds but they are not DIX.
As far as I can see there is only one grade of DIX reeds

Quote
With Dix reeds, you have the option of plate material...zinc, brass, or aluminum.

Thanks Rees and Brian.  My confusion came from the 3 Harmonika A Mano grades which I mistakenly assumed to be DIX.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Binci vs. DIX bass reeds
« Reply #23 on: April 26, 2016, 07:42:21 PM »

A quick one in the kitchen on my phone:

https://www.youtube.com/watch?v=mPCD0l1X1Oc
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Binci vs. DIX bass reeds
« Reply #24 on: April 26, 2016, 08:47:54 PM »

It sounds wonderful.
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Binci vs. DIX bass reeds
« Reply #25 on: April 27, 2016, 01:48:12 AM »

My old mid 30's Globe Gold Medal Professional (6 voice celluloid covered, not a 4-stopper) has DIX reeds throughout (alu plate), and the basses are actually quite quick to response ... the lowest bass has a very tall chamber (flat mounted on the bass side soundboard), and a huge hole for airflow to the inside of the growlbox. For the lowest bass reed, the hole in the soundboard is around 20 mm. I do not feel that it uses a lot of air, even though it has 4 reeds for the bass, and 5 for the chord.

Whilst my 4-stopper Globe "Gold Medal" (made by International Accordion in the 1920s, and with Dix reeds as they always did) has flat-mounted chambering around 13 mm deep for all the bass and chord reeds, with three 24mm holes in the bass-board, one for the air valve, one for the 6-on-a-plate chord reeds (3 each way), and one for the two lowest bass reeds, plus another measuring 12.5 mm for the third and highest bass reed by itself.

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Binci vs. DIX bass reeds
« Reply #26 on: May 02, 2016, 08:35:55 AM »

Thanks for the measurements on the bass side of you Gold Medal, which saves me from opening mine up.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Binci vs. DIX bass reeds
« Reply #27 on: May 02, 2016, 09:07:37 AM »

So this maybe has something to do with fluid dynamics? When pushing air through a pipe, if you reduce the size of the pipe, the air speed increases with a corresponding drop in pressure. So the hole in the reed chamber was perhaps choking off the pressure need to operate the reed. Increasing the hole size would prevent a reduction of pressure in the reed chamber.  Theo or someone with a better grasp of physics than me can probably elaborate. 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Binci vs. DIX bass reeds
« Reply #28 on: May 02, 2016, 09:30:41 AM »

Sorry to disappoint but fluid dynamics is a horribly complex field that I know little about.  The number of variables associated with a reed is large and I wouldn't know where to start to analyse the physics.   The intuitive approach here seems to have been successful so why try to complicate things?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Binci vs. DIX bass reeds
« Reply #29 on: May 02, 2016, 10:37:01 AM »

 >:E

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Binci vs. DIX bass reeds
« Reply #30 on: August 04, 2016, 01:24:40 PM »

I've just completed a Clipper using DIX reeds. The treble side is astonishing. However:

The bass reeds are much longer than the Binci reeds that I normally use.
I fitted my standard bass reed chamber which is 15mm deep.
This chamber works fine with the Bincis but is slow to come up to tune use the DIX bass reed.
I have drastically improved the response by turning the plate lengthways on the chamber so that the tip of the reed is nearest the air inlet but it is still struggling slightly.
Would increasing the depth of the chamber make a difference? Enlarge the hole? Use a Binci reed? Burn it?
Help!

How would you compare the DIX sound to Binci reeds -- and which Binci reeds do you use, the professionals?
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Binci vs. DIX bass reeds
« Reply #31 on: August 22, 2016, 05:14:31 AM »

While researching my 1-row project I noticed old 1-rows with a single hole for dual-reed bass usually have a filler plate on the bass reed box.  You see only 1 and you think they did it to compensate for an undersize reed plate, but it seems to have been more or less standard.  Maybe for some fluid-dynamics related reason...?

Picture shows - top to bottom - an Eaqle Brand Professional, a Globe Special and a modern box (Messervier).  The Globe has 25 mm or so holes and Dix reeds, the 2 others have 18-19 mm holes.  (and no filler plate on the Messervier...)   
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Binci vs. DIX bass reeds
« Reply #32 on: August 22, 2016, 08:29:02 PM »

I've just completed a Clipper using DIX reeds. The treble side is astonishing. However:

The bass reeds are much longer than the Binci reeds that I normally use.
I fitted my standard bass reed chamber which is 15mm deep.
This chamber works fine with the Bincis but is slow to come up to tune use the DIX bass reed.
I have drastically improved the response by turning the plate lengthways on the chamber so that the tip of the reed is nearest the air inlet but it is still struggling slightly.
Would increasing the depth of the chamber make a difference? Enlarge the hole? Use a Binci reed? Burn it?
Help!

How would you compare the DIX sound to Binci reeds -- and which Binci reeds do you use, the professionals?

Yes, I use Binci Pro.

John Spiers was on my stall at FolkEast yesterday comparing the two. His comments were that the DIX are more "spongy" than the Binci  ::)
In other words, the Binci reeds build to maximum sonority very quickly with a small increase in pressure, whereas the DIX reeds follow a more gentle curve.

My comments - Binci, hard and loud. DIX, colourful, harmonious, pliable and slightly Hohner-ish. Both are very delicious reeds indeed.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Binci vs. DIX bass reeds
« Reply #33 on: August 23, 2016, 02:18:24 AM »


John Spiers was on my stall at FolkEast yesterday comparing the two. His comments were that the DIX are more "spongy" than the Binci  ::)
In other words, the Binci reeds build to maximum sonority very quickly with a small increase in pressure, whereas the DIX reeds follow a more gentle curve.

My comments - Binci, hard and loud. DIX, colourful, harmonious, pliable and slightly Hohner-ish. Both are very delicious reeds indeed.

This "spongy" feeling is one thing I find desirable, at least for the music I play.  It seems to infuse some character that I like.  It also made them a little harder to tune for me, because the pitch is less stable in various bellows pressure ranges. 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Binci vs. DIX bass reeds
« Reply #34 on: August 23, 2016, 08:44:52 AM »

While researching my 1-row project I noticed old 1-rows with a single hole for dual-reed bass usually have a filler plate on the bass reed box.  You see only 1 and you think they did it to compensate for an undersize reed plate, but it seems to have been more or less standard.  Maybe for some fluid-dynamics related reason...?

Picture shows - top to bottom - an Eaqle Brand Professional, a Globe Special and a modern box (Messervier).  The Globe has 25 mm or so holes and Dix reeds, the 2 others have 18-19 mm holes.  (and no filler plate on the Messervier...)

My guess is that the bass reeds with filler plate are smaller than the standard bass reed, and probably an octave higher than usual.  They may be replacements of a broken reed, or a player may have preferred a higher pitch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Binci vs. DIX bass reeds
« Reply #35 on: August 23, 2016, 10:48:14 AM »

When I said 'spongy' I wasn't saying anything derogatory ... the reeds in that box all sounded with really low pressure (and all at once - kudos to the setter-upper!) - indicating that they're a high quality reed.  They also go up to a really high volume under pressure - but as Rees says - the curve is gentler and there's a lot of scope for expression there.

I have to say that I think I prefer a Binci type response for my own playing - but actually there is a 3rd option which I think sits between the two which is the 'a mano' Class 1 reeds that are also made at the Harmonikas factory along with the DIX reeds.  They have a much harder feel about them and have much more strength at high pressures than the DIX but lack a bit of the exposed harshness of the Bincis.  I've got a pokerwork that has been kitted out with Harmonikas a mano reeds and the sound and playability is glorious.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Binci vs. DIX bass reeds
« Reply #36 on: August 23, 2016, 11:23:07 AM »

Thanks for further clarifying "spongy" John. I've been looking at the Harmonikas a mano Class 1 reeds and will now order some on your recommendation. They sound ideal.

......... and Bryan, I totally agree with your comments regarding the character of the sound of DIX reeds
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Binci vs. DIX bass reeds
« Reply #37 on: August 23, 2016, 04:42:41 PM »

Quote
My guess is that the bass reeds with filler plate are smaller than the standard bass reed, and probably an octave higher than usual.  They may be replacements of a broken reed, or a player may have preferred a higher pitch.

Exactly my point - I thought undersized plate initially, but no, they're standard size and pitch.  There are 2 more pictures of a similar arrangement on pages 1 and 2 of this thread: http://forum.melodeon.net/index.php/topic,336.0.html
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Binci vs. DIX bass reeds
« Reply #38 on: August 23, 2016, 05:26:09 PM »

It depends what you mean by standard size.  Old German bass reeds are usually bigger than modern Italian ones.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Binci vs. DIX bass reeds
« Reply #39 on: August 23, 2016, 05:59:06 PM »

31 x 81 mm or so
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal