Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Reed Waxing for the Mechanically Challenged  (Read 10851 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed Waxing for the Mechanically Challenged
« Reply #20 on: July 29, 2016, 07:58:24 AM »

..
For small jobs I.e. refitting a few reeds, the the soldering iron is fine, though I do have an adjustable one, bought off eBay for a few quid. The problem then is that you need little sausages of wax, which I make by digging out a lump of wax and rolling between my fingers...though it is sticky.
..

You don't need to make wax sausages - just use a wax stick applied to the soldering iron just above the tip of the iron. The wax will then flow down to the tip and on to the reed block. Watch Lester's video.

Wax sticks are available from Charlie Marshall, or if you have lump wax, you can make sticks by pouring molten wax on to a tray to make a puddle a few millimetres deep. Once it has solidified but still slightly warm, cut the sheet of wax into sticks using a sharp knife and a straight edge.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Waxing for the Mechanically Challenged
« Reply #21 on: July 29, 2016, 09:47:01 AM »

For the likes of me (mean!) the soldering iron is the obvious option. Surely most of us have access, maybe even via a friend or relative, to an electric soldering iron, which means that we don't have the expense of buying a heater of some sort, or cobbling one up to use on the cooker and thereby possibly incurring the wrath of our beloved.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Reed Waxing for the Mechanically Challenged
« Reply #22 on: July 29, 2016, 09:56:25 AM »

I agree - it looks like a skill that pays dividends to learn. I tried once, but used a kitchen spoon which I'd bent in the vice. better to get the real thing.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Reed Waxing for the Mechanically Challenged
« Reply #23 on: July 29, 2016, 09:59:47 AM »

Thanks for all the replies and links.

I suspect I shall send it to a man who does (unless anyone can suggest a woman...).  I shall do this first, rather than after trying and cocking it up.

I shall then spend the time learning to play one of the other 11 properly... :||:
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Waxing for the Mechanically Challenged
« Reply #24 on: July 29, 2016, 10:04:43 AM »

Success cutting wax sticks is a matter of temperature.  Wax too warm and it sticks to the knife, to cool and it's hard to cut through and it tends to crack and break.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed Waxing for the Mechanically Challenged
« Reply #25 on: July 29, 2016, 10:38:39 AM »

I can confirm that CGM does have wax sticks in stock and always has done.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Reed Waxing for the Mechanically Challenged
« Reply #26 on: July 29, 2016, 11:56:28 AM »

Another video from Diatonix who sometimes posts here:

https://www.youtube.com/watch?v=yjGaLwqrtOs

This is the method I now mainly use. After seeing the Diatonix video, I made some of these reed spoons, in different sizes, out of copper and brass sheet, tube and wooden handles. They were a doddle to put together, once I'd cleaned all the wax off my soldering iron bits (!). Olav (Diatonix) was kind enough to give my handiwork (via photos) the once-over to confirm that I'd got them about right.

I use them with a temperature-controlled cosmetic wax heater, and find them quite easy to use, with practice. I also made some flat wax spoons out of a stainless pedal bin, which also work well.

The key to using these tools successfully is, of course, the availability of a ready supply of molten wax, kept hot enough to run but not too hot to cook or burn; hence my wax heater.
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Reed Waxing for the Mechanically Challenged
« Reply #27 on: July 29, 2016, 12:13:54 PM »

Lester, when I see that video I always think the iron is far too hot.  Do you still use the same method?
I have a dimmer in line to the iron now to cool it down.

I have borrowed a posh soldering iron with variable temperature...what is the recommended one...(and I know the "when it works answer already.. :|glug)
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed Waxing for the Mechanically Challenged
« Reply #28 on: July 29, 2016, 07:38:03 PM »

For the likes of me (mean!) the soldering iron is the obvious option. Surely most of us have access, maybe even via a friend or relative, to an electric soldering iron, which means that we don't have the expense of buying a heater of some sort, or cobbling one up to use on the cooker and thereby possibly incurring the wrath of our beloved.

What's all this about cookers?  A friend was having a garage sale and just gave me the old hot plate I inquired about.  The heat is fully adjustable and being something entirely outside of the realm of the kitchen, my wife could care less what I do with or to it.  These things sell for cheaper than a soldering iron, which I do have but the heat is not adjustable which led to burning of the wax, though i still managed to get an albeit messy job done that functions, but should really be redone. 
That said, it seems to me that every method has its merits, and all will require trial and error to get right.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed Waxing for the Mechanically Challenged
« Reply #29 on: July 29, 2016, 07:48:12 PM »

Am I crazy or does the "proper" way look just as simple- not necessarily easy, but no more involved/difficult than the other methods.  Now where does one find those nifty little spoons?

This is what the pros use. It's not a spoon but a simple flat blade.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Waxing_Tools.html#0

Their wax pot sits on top of a one ring elctric hob set to 1.5 in the winter and 1 in the summer - extractor hood essential.
(this info from Letizia Bompezzo of Castelfidardo, Italy. I've seen her wax a full size piano accordion treble reed block, both sides, in under two minutes!).
« Last Edit: July 29, 2016, 07:55:04 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Peter Courtney

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Reed Waxing for the Mechanically Challenged
« Reply #30 on: August 07, 2016, 10:05:37 AM »

I use a syringe and shortened needle 12 gauge I think. stand  syringe with needle attached in wax pot. have wax about 180 degrees. This is to heat up needle so wax will flow. Have a few trial goes and with practise you can get a very good finish. Have reeds slightly tilted up
, I do in beween reeds first then bottom and then top. Just do a few at a time and reheat needle in between usage You need a syringe that can be boiled, clean up with white spirit.
I have done all sorts of accordions with this method, at first it was messy but now very tidy. I have sold on plenty of them with no complaints

Cheers
Logged

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Reed Waxing for the Mechanically Challenged
« Reply #31 on: August 11, 2016, 05:03:40 PM »

Reed Waxing for the Mechanically Challenged

Yep, worked for me. Standard soldering iron, pinch of wax rolled into a small worm. A quick dab with the iron, a little smoke but it ran where I wanted it to go. Just for a couple of loose reeds, no problem with the heat but a cooler iron if I was doing a lot more. Nice wax from Bernard, softish to start with or is it just the warm weather?
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Reed Waxing for the Mechanically Challenged
« Reply #32 on: August 11, 2016, 11:00:11 PM »

Just done my first try with bee-wax. How dangerous are the smoke (fumes?) from PURE beeswax?

Used hot iron.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Reed Waxing for the Mechanically Challenged
« Reply #33 on: August 12, 2016, 12:03:46 PM »

As beeswax candles are very common, and sold without any health warning about their fumes, you should be OK.

Just done my first try with bee-wax. How dangerous are the smoke (fumes?) from PURE beeswax?

Used hot iron.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Waxing for the Mechanically Challenged
« Reply #34 on: August 12, 2016, 01:16:34 PM »

But pure beeswax is not ideal for waxing reeds, it can become brittle when cold,  and may not adhere to wood as well as one of the traditional blends of beeswax, rosin and oil.

Comparison with candles is misleading.  A candle flame burns the waxes and hydrocarbons in the wax so what goes into the air is combustion products which are mainly CO2 and water.  Heating beeswax without combustion will release a completely different mix of chemicals which may or may not be harmful.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Reed Waxing for the Mechanically Challenged
« Reply #35 on: August 13, 2016, 06:32:51 PM »

This is a task for me  ;).

This melodeon was opened in 1949. I found parts of a newspaper inside. It has not been played since.  There are missing reedblocks.
And buttons. And valves. And springs. And pallets.
Other reedblocks are loose.
It can not be played now. It will not play ever.
Many hundreds of holes of woodworm. And powder.    (  Powder Post Beetle  (Lyctus brunneus) )
 Can I cover the holes with wax?   
I have tried with toothpicks and wood glue, but it was not good.  Looked like a hedgehog.

And how in the world could you tune an instrument before there was digital tuners?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed Waxing for the Mechanically Challenged
« Reply #36 on: August 13, 2016, 07:26:22 PM »

And how in the world could you tune an instrument before there was digital tuners?

Tuning forks, pitch pipes and good ears.........
« Last Edit: August 13, 2016, 07:28:05 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Waxing for the Mechanically Challenged
« Reply #37 on: August 13, 2016, 07:28:44 PM »

And a set of reference reeds covering a chromatic octave.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Reed Waxing for the Mechanically Challenged
« Reply #38 on: August 14, 2016, 10:13:54 AM »

Any suggestions on wood worms?

Do not say throw away the box. It is a training box.

And the best part of it is . . . . it is not mine. 
« Last Edit: August 14, 2016, 10:16:51 AM by Stockaryd »
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed Waxing for the Mechanically Challenged
« Reply #39 on: August 14, 2016, 11:03:07 AM »

I have been told, by someone whose job involved controlling woodworm, that freezing destroys remaining eggs. That might be a good place to start.
I have a box with some worm holes. My plan is to use some matching wood filler. Not the quick setting variety, don't expect it to be a quick job.  :(
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal