Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Glue for leather valves onto metal?  (Read 5733 times)

0 Members and 1 Guest are viewing this topic.

Jimbo

  • Member
  • *
  • Offline Offline
  • Posts: 8
Glue for leather valves onto metal?
« on: February 13, 2017, 05:57:57 PM »

Anyone suggest a common glue (I'm in Canada) appropriate for attaching a leather valve to metal?  I thought I saw Gorilla glue mentioned in a post, but can't find it now...  Also, anyone ever try one of those hot glue gun thingees?  Thanks in advance.  Jimbo
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Glue for leather valves onto metal?
« Reply #1 on: February 13, 2017, 06:16:24 PM »

Ordinary impact/contact adhesive like Bostik Contact Adhesive or the EvoStik equivalent is fine.

Put a thin smear of glue on the end of the valve (usually about 6 - 10 mm depending on the valve length) and immediately press gently into place. Don't put glue on both surfaces, just the valve. You have a short time to reposition the valve if necessary.

You can also buy the special valve glue from suppliers like Charlie Marshall, but in my experience, contact adhesive works just fine.

Don't use hot melt glue, Superglue, PVA, gorilla glue or silicone sealant!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue for leather valves onto metal?
« Reply #2 on: February 13, 2017, 06:39:13 PM »

I agree with the suggestion of a contact adhesive, but if it is a solvent based one test on plastic valves first. Some solvents cause some plastic valves to distort.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Glue for leather valves onto metal?
« Reply #3 on: February 13, 2017, 06:56:11 PM »

While it's not a contact adhesive, Gorilla Super Glue (not the same as Gorilla glue) works fine for both plastic and leather valves.  Can't remember if I got it from Canadian Tire or Rona, but it's easy enough to find...
Logged

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Glue for leather valves onto metal?
« Reply #4 on: February 13, 2017, 09:16:15 PM »

Going with contact adhesive leaves the choice of solvent or water based.
As Theo says there is always the risk of solvent based adhesive damaging valves - but this is easy to test for.
Water based might appear a safer bet, but I am always concerned that this would set up corrosion - not so easy to do an instant test for.

Does anyone have experience that allays or confirms corrosion fears with water based contact adhesives?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Glue for leather valves onto metal?
« Reply #5 on: February 13, 2017, 11:38:37 PM »

I've never had any problem with the solvent-based contact adhesive brands Bostik, Evostik or Homebase 'own brand' affecting the plastic of the valve.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue for leather valves onto metal?
« Reply #6 on: February 14, 2017, 07:14:44 AM »

You've been lucky then Steve. Not common but it can happen so prudent to do a test.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Glue for leather valves onto metal?
« Reply #7 on: February 14, 2017, 07:56:44 AM »

I use a form of shellac designed as a sealant for gaskets in automotive application. I apply a thin U shaped line at the rivet end of the reed, using a toothpick. Thus no chance of too much adhesive in the undesired location. I apply the leather while the shellac is tacky. The shellac will disolve at anytime in the future with alcohol. No brutal removal methods needed at at later date. The worst glue and leather removal I have done was to remove leathers made from an old belt, applied with epoxy, which oozed onto the reeds. I wouldn't have bothered but the reeds were prewar Dix made.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Glue for leather valves onto metal?
« Reply #8 on: February 14, 2017, 08:00:14 AM »

Another reason I use shellac: alcohol is the only solvent needed to remove later, no corrorsion hazard to steel reeds and none to synthetic valves.
Logged
I'm squeezin' and they're wheezin': old junker boxes

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Glue for leather valves onto metal?
« Reply #9 on: February 14, 2017, 03:24:38 PM »

Interesting - I guess you mean a product like this one:

https://www.permatex.com/products/gasketing/gasket-sealants/permatex-indian-head-gasket-shellac-compound/

Do you know if it also works with plastic valves ??
Logged

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Glue for leather valves onto metal?
« Reply #10 on: February 14, 2017, 09:31:30 PM »

I use either solvent free Bostik ( I think Rees recommended this) or Uhu (Paul Flannery recommended it).

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Glue for leather valves onto metal?
« Reply #11 on: February 15, 2017, 05:06:09 AM »

Interesting - I guess you mean a product like this one:

https://www.permatex.com/products/gasketing/gasket-sealants/permatex-indian-head-gasket-shellac-compound/

Do you know if it also works with plastic valves ??
Yes, but I don't have long term experience with plastic valves, I mostly use leather.
Logged
I'm squeezin' and they're wheezin': old junker boxes

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Glue for leather valves onto metal?
« Reply #12 on: February 15, 2017, 02:16:41 PM »

Quote
Yes, but I don't have long term experience with plastic valves, I mostly use leather.

OK, I understand.  Thanks Psuggmog.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Glue for leather valves onto metal?
« Reply #13 on: February 18, 2017, 07:18:23 AM »

It does not really work with plastic very well.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Glue for leather valves onto metal?
« Reply #14 on: February 18, 2017, 08:20:29 AM »

Hi  solvent free Bostik this was recommended on the forum easy to use quick tack application
does not react with plastic valves "perfect"
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Glue for leather valves onto metal?
« Reply #15 on: February 18, 2017, 03:59:38 PM »

Unfortunately, Bostik solvent free is not widely available (if at all) in Canada where OP lives.  Searches on Google and eBay bring in mostly UK sources.
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Glue for leather valves onto metal?
« Reply #16 on: February 18, 2017, 05:22:06 PM »

Hi guys
Quote
Unfortunately, Bostik solvent free is not widely available (if at all) in Canada where OP lives.
sorry always assume with globalisation you can get anything anywhere   
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Glue for leather valves onto metal?
« Reply #17 on: February 18, 2017, 05:54:39 PM »

Bostik is also not available in the US, that I know of.  I've used Barge and Pliobond with good results with leather.  But I've come to use, from advice received here, Bison glue because it's good for both leather and plastic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Glue for leather valves onto metal?
« Reply #18 on: February 20, 2017, 07:45:43 AM »

Hi guys with the lack of availability of solvent free glue thought i would try hide glue i think its available just about everywhere............appears to stick really well easy to use cheap and seem to stick almost anything,and easy to remove
so might be another option   
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Glue for leather valves onto metal?
« Reply #19 on: February 20, 2017, 08:31:47 AM »

Hi guys with the lack of availability of solvent free glue thought i would try hide glue i think its available just about everywhere............appears to stick really well easy to use cheap and seem to stick almost anything,and easy to remove
so might be another option
I've never used hide glue for valves, but my instinctive feeling is that it would set too hard/brittle which might be a problem with vinyl valves. Contact adhesive retains a degree of plasticity which is helpful for slight repositioning adjustments and also for removal - any residue left on the reed plates mostly peels off easily; any stubborn bits can be removed with a cotton bud moistened with methylated spirit.

If you can't get solvent-free contact adhesive, I will (once again) mention the proper Hohner valve adhesive.
It's easily available from Charlie Marshall and he will ship worldwide.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal