Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 6 [7] 8 9   Go Down

Author Topic: Recording king repair  (Read 31530 times)

0 Members and 2 Guests are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #120 on: December 30, 2017, 02:27:58 PM »

Thanks Steve,
I'll try that, these computers are like my local hardware store as soon as I figure out where something is located, it gets moved.

I thought the emojis that are located just above the area where I'm typing now (post reply) are part of this site?
Maybe they will show after I do what you suggest. Also its not just the emojis but all the other stuff that sits above them, eg. bold, underline etc.
Ah  - sorry, I misunderstood your earlier query; I thought you were asking about the general Mac screen layout in the Finder.
I don't know why you are not seeing emoji and other formatting options within the melnet post/reply screens. They should be just above the text input box. What web-browser are you using? Everything is fine for me whether using Safari, Firefox or Opera, on an iMac running Sierra OS.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #121 on: December 30, 2017, 02:56:44 PM »

I'm using chrome but have Safari, Firefox , I haven't heard of Opera.
I'll try the others to see what happens, I'm running on Sierra OS also.
I'm on the iPad at the moment, so I'll check it out.
Thanks


Edit: works ok on Safari, it always work ok before using chrome on my older iMac computer?
« Last Edit: December 30, 2017, 04:01:00 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #122 on: January 22, 2018, 01:40:23 AM »

You probably thought I gave up on this, but I'm still working on it.
I got the reeds valved and some waxing done two treble blocks left to do.
I'll go though the reeds again and tune in the blocks. I made a waxing spoon that's working pretty good (last time I did this on my Hohner 1040 I used a paint brush which worked but was a little thin on wax) , it takes a little practice. Hopefully I didn't over do it this time? I made the spoon out of copper and since I don't have a wax pot I just melted the wax in the spoon little at a time. I used a soldering iron to heat the wax in the spoon, I just laid the iron in the small end of the spoon ( which was on a slight angle) and held it down with a small bit of metal. Then I just let heat transfer take place though the copper spoon, a little slow but it worked. I set up near a window and vented any vapor outside with a fan, there wasn't much smoke if I wiped off any wax that was on the iron. funny if I stuck the iron right in the liquid wax I didn't notice any smoke but when I pulled it out plenty.
here's a couple pics of my progress
bass block and treble reeds
« Last Edit: January 22, 2018, 01:50:11 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #123 on: January 22, 2018, 01:44:49 AM »

one more treble block


question: now that the reeds for the chords are in the blocks if there off when tuning how do you know which reed to tune? Isolate each one or tune all equal amounts, the latter seems like hit or miss.
« Last Edit: January 22, 2018, 01:46:55 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #124 on: January 22, 2018, 02:04:07 AM »

one more treble block


question: now that the reeds for the chords are in the blocks if there off when tuning how do you know which reed to tune? Isolate each one or tune all equal amounts, the latter seems like hit or miss.

You need to open up the box and look carefully at which pallets are lifted by the various chord and bass buttons, and hence the reeds which are activated. Then make a diagram of where every reed plate is and what note is is meant to produce, both push and pull. Keep referring to your diagram as you work on the tuning.
You will need to isolate individual reed plates as you work, so that you are just tuning one reed tongue at a time.
Use de-stickified masking tape as described below.

You might find this thread and posts useful:

http://forum.melodeon.net/index.php/topic,18336.msg229171.html#msg229171
http://forum.melodeon.net/index.php/topic,18336.msg229353.html#msg229353
http://forum.melodeon.net/index.php/topic,18336.msg229480.html#msg229480

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #125 on: January 22, 2018, 02:33:10 AM »

Ok thanks Steve, I made a note of which reed was which right on the top of block when I was doing the initial tuning, so isolate them then, that what I was thinking, worth checking though (:)

I think I'm going to need some proper tools to do this finer tuning, better tuning table also :||:
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #126 on: January 25, 2018, 02:03:14 AM »

Ok, so I made a new tuning table using the PA bellows, I'm having much better results.
Now I have a question so tuning the M+ row, I started with the G row reeds valved and on the block tuner set to 440.5 and say I start with the second button push G at eighteen cents and I get up to the next G and there I need to be at nine cents (I think, half the starting point) then work up to the next G maybe 4.5 cents. Would this be about right for say 9 cents tremblo, does this sound right? And would it be best to be constant from one octave to the the next or creep slowly down in cents as you go up the scale?

One more thing is a couple of the big bass reeds are rubbing the edge of slot so rattling and not sounding proper, I 'm not having as much luck as with some of the smaller reeds moving the tongue because of two rivets. Any ideas?
Not sure if I should try hitting the reed tongue near the rivet to nudge it over.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #127 on: January 26, 2018, 05:44:27 PM »

I'll try again ....

?? = answer anyone?
Maybe I hit the stupid question limit:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Recording king repair
« Reply #128 on: January 26, 2018, 06:39:32 PM »

Maybe split your questions up a bit into more than one post.

I use a scalpel blade to centre reeds. Slim blade and long enough handle to get very gentle leverage, but enough to give a bit of a shove if needed. After a couple of goes you can tell by the sound when it's happy.

Save the hammer to tighten the rivet (hit harder than you expect).

For the tremolo, others might comment on the figures as it's been a while since I played with it, but it appears to be personal preference how you deal with the tremolo as you go up the scale.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Recording king repair
« Reply #129 on: January 26, 2018, 06:57:04 PM »

Disclaimer: not a fettler.

Well, things I do know and can tell you, and I believe you also know but can't quite recall: Cents are a measure of % between semitones, but Tremolo beats per second is determined by the actual frequency difference of the reeds. When you go up an octave, you double the frequency, so, A220 -> A440 -> A880. The difference in the frequency to the A# above each A will be half as much at 220, and twice as much at 880, but in all cases will still of course be 100 cents sharper.

So, in order to have an exactly even tremolo up and down the keyboard, you would need to tune every note with Hz offsets rather than cent offsets, but most accounts I've read and a few people I've talked to, many still tune with cents, and while they do indeed reduce the cent offsets a small amount for every note of the scale, they may favour a slightly increasing beat rate for the sake of character / timbre. However, I believe many of the progressions people use are often stored in little books that they keep close to them at all times and don't post on the internet very much, if only because I don't think if I've seen much of it out in the open. At the very least there's a lot about it in this thread.

Regarding the bass reeds, is there much in the way of tarnishing/rust etc around the rivets? If so, one imagines it's been slowly displaced by that. I'm not sure if chemical warfare is a viable approach but you may need to do something since as you note, with 2 rivets, if they now have profiles that are out of line, the tongue may not want to move.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #130 on: January 26, 2018, 07:00:14 PM »

Here's a tremolo tuning curve which I have developed over the years, based on (a) 1930s Hohners, (b) recommendations from Martyn White, and (c) what sounds nice to me.  It shows the difference in cents between the M- and M+ reeds for Viennese ('Dedic') tuning where one reed is tuned flat of ET and the other tuned sharp of ET. The result is a nice warm tremolo, but not excessive; less wild than modern Hohner factory tuning!

If you don't want to do 'Dedic' type tuning and have your M reed at pitch (M0) and the other sharp (M+) then all you need to do is adapt the tuning curve so that the M0 and M+ reeds are the same distance apart as M- and M+. 

Tune your offsets using this curve (or any other system) to begin with, but then put the curve and electronic tuner away and always use your ears to do any final tweaks so that it sounds nice.

Hope this is helpful...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Recording king repair
« Reply #131 on: January 26, 2018, 07:04:07 PM »

Or just tune it dry - it's a lot easier.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #132 on: January 26, 2018, 07:31:00 PM »

Maybe split your questions up a bit into more than one post.

I use a scalpel blade to centre reeds. Slim blade and long enough handle to get very gentle leverage, but enough to give a bit of a shove if needed. After a couple of goes you can tell by the sound when it's happy.

Save the hammer to tighten the rivet (hit harder than you expect).

For the tremolo, others might comment on the figures as it's been a while since I played with it, but it appears to be personal preference how you deal with the tremolo as you go up the scale.
Thanks Malcolm
I'll try that, and I think the post being missed was just bad timing on my part. Posting while most of you are sleeping, also a lot of other posting that same morning.

Disclaimer: not a fettler.

Well, things I do know and can tell you, and I believe you also know but can't quite recall: Cents are a measure of % between semitones, but Tremolo beats per second is determined by the actual frequency difference of the reeds. When you go up an octave, you double the frequency, so, A220 -> A440 -> A880. The difference in the frequency to the A# above each A will be half as much at 220, and twice as much at 880, but in all cases will still of course be 100 cents sharper.

So, in order to have an exactly even tremolo up and down the keyboard, you would need to tune every note with Hz offsets rather than cent offsets, but most accounts I've read and a few people I've talked to, many still tune with cents, and while they do indeed reduce the cent offsets a small amount for every note of the scale, they may favour a slightly increasing beat rate for the sake of character / timbre. However, I believe many of the progressions people use are often stored in little books that they keep close to them at all times and don't post on the internet very much, if only because I don't think if I've seen much of it out in the open. At the very least there's a lot about it in this thread.

Regarding the bass reeds, is there much in the way of tarnishing/rust etc around the rivets? If so, one imagines it's been slowly displaced by that. I'm not sure if chemical warfare is a viable approach but you may need to do something since as you note, with 2 rivets, if they now have profiles that are out of line, the tongue may not want to move.
Thanks Gena,
That's good info on the Hz rather than cents.  "as you know" really I don't know but I'm learning. (:)
So I assume when tuning the two reed sets together I'd be better off using Hz.
I'll have a look at the thread you linked to, to see if I can glean anything from that.



Stevefreereeder thank you !! That should be a big help.

Tiposx - that would be easier, but I think these boxes benefit by having a little tremolo.
Plus I'm most likely going to learn more this way.
My wife said to me yesterday " with all the time you been working on this box it's going to cost you a fortune" My response " I'm doing this for the experience and to learn, so the value won't be in the box"



Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #133 on: January 26, 2018, 07:58:51 PM »

So, in order to have an exactly even tremolo up and down the keyboard, you would need to tune every note with Hz offsets rather than cent offsets, but most accounts I've read and a few people I've talked to, many still tune with cents,
As many electronic tuners read differences from 'in tune' in cents, it is far more convenient to use cents offsets to describe the difference between the M0 and the M+ reeds.

The relationship between cents offset and tremolo frequency (Hertz) is given by the formula:
c = 1200 × log2 (f2 / f1)
where c is the difference in cents, f is the frequency in Hz of the two reeds concerned, and log2 means logarithm to base 2.

If you are so minded, you can teach yourself a lot by constructing some Excel spreadsheets and graphs, using the above formula, in order to visualise how the cents offsets change for various frequency differences between the two reeds across the normal melodeon range (which is how I constructed the tuning curve chart in my previous post).

Before electronic tuners were invented, human tuners in a factory would often use a special reference set of reeds to tune the instrument's reeds to. That in turn would have been based on 'what sounded OK'.

So despite the mathematical formula mentioned above, it is still perfectly possible to tune the tremolo reeds by ear, adjusting the pitch as needed to give the desired tremolo rate. With a bit of practice you can train yourself to listen carefully and count the tremolo beats per second, although with a fast tremolo rate it does get a bit tricky.

Quote
...and while they do indeed reduce the cent offsets a small amount for every note of the scale, they may favour a slightly increasing beat rate for the sake of character / timbre. However, I believe many of the progressions people use are often stored in little books that they keep close to them at all times and don't post on the internet very much, if only because I don't think if I've seen much of it out in the open.

Some people favour a steady tremolo rate across the range, others (like myself) a slightly increasing tremolo rate with increasing pitch. It is ultimately down to personal preference, which is perhaps why you don't see much stuff published on t'interweb thingy, and not that people are being deliberately secretive or obstructive about it.

However, because there is no 'correct answer', it does take a while to explain, as the many various threads on this forum demonstrate, and much has already been explained in earlier threads and posts. So it's worth a thorough search through the forum history. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Recording king repair
« Reply #134 on: January 26, 2018, 09:53:54 PM »

So despite the mathematical formula mentioned above, it is still perfectly possible to tune the tremolo reeds by ear, adjusting the pitch as needed to give the desired tremolo rate.
...
Some people favour a steady tremolo rate across the range, others (like myself) a slightly increasing tremolo rate with increasing pitch. It is ultimately down to personal preference, which is perhaps why you don't see much stuff published on t'interweb thingy, and not that people are being deliberately secretive or obstructive about it.

However, because there is no 'correct answer', it does take a while to explain, as the many various threads on this forum demonstrate, and much has already been explained in earlier threads and posts. So it's worth a thorough search through the forum history.

You are of course, quite right Steve. With music, if one tries to say how things should be using maths and waveform interactions, you'll soon end up having that same maths tell you you're also wrong, and if you were to do it so it sounds right to you, someone will probably pipe up that it doesn't sound quite right to them. However, since your ears are the ones that will be doing the majority of the hearing, you're right that you shouldn't devalue that just so that it looks nice when you write information down about it on a piece of paper or a little electronic box turns green. When it helps you to understand relationships, lets you write down information, lets you achieve a result that bit faster, or helps you not make a mistake that you didn't foresee, musical analysis is very helpful. Reminding people that instead of asking "what is correct?", that one should ask "what do I like?" is a good thing to be doing.

The books reference was a little dry humor, but I guess it fell flat, no jibes really intended. Plus, to be fair to anyone who did air on the side of maybe keeping it to themselves, aside from having to deal with people telling them their progression is wrong, there's also a clear precedent in fine tuning information having a real world commercial value, in that if I recall correctly everyone's favourite iOS tuner app sells sweetened tunings for most stringed instruments.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #135 on: January 27, 2018, 08:30:43 AM »

....Stevefreereeder thank you !! That should be a big help.
You're welcome. But please just check you have the correct version of the diagram. I mistakenly attached the wrong diagram to my post, but realised my error a few minutes later and reposted with the correct diagram. Hopefully you didn't get the wrong one!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Recording king repair
« Reply #136 on: January 27, 2018, 09:53:02 PM »

some of you might remember that the improbability drive required a cup of strong tea - well - if you have a rusty reed - make a really strong cup of tea.
The tannin in the tea - made about 8 times stronger than the average human might like it - or about twice as strong as builders tea, will react with the rust - it doesn't need milk and sugar.
It works well on the delicate parts of knitting machines, and after an hour bathing in the tea a gentle rinse off and light rub with a toothbrush and the reed should show alteration for the better.
It might be possible to apply the tea to the reed on tissue paper or kitchen roll - but it might be rusty on the other side too so removal and immersion would be advisable.   
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #137 on: January 27, 2018, 10:45:05 PM »

Thanks Anne
No need for tea as the reeds are not rusty, although it might be good for the cold.

The reed problem is with the alignment and two rivets making movements difficult.
I got a couple moved to the right place using Malcolm's blade method.

I just finished tuning the treble reeds on the block and put them into the box.
They don't sound to far off, maybe just a few tweaks. I still need to finish the bass and chords.
Then put on bellow straps and do something to the air button,as it's hard to reach.
I may also do the bellows tape when I can and if I'm happy with it.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Recording king repair
« Reply #138 on: January 28, 2018, 02:14:37 PM »

Air button hard to reach is a common problem then?

I await your development of an alternative then - as my left hand thumb joint was overstretched yesterday and is going to need a rest from the Ariette if I am to be able to play it at all tomorrow.

I have been considering a secondary strap which would raise the bass box up relative to my hand, but the physical size front to back is also a problem - my fingertip to wrist length is simply too short to wrap around the woodwork.
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Recording king repair
« Reply #139 on: January 28, 2018, 02:57:31 PM »

Air button hard to reach is a common problem then?
I believe it is, especially for people with small hands. One of our Morris musos has a problem with her Pokerwork, in reaching the G/C basses and operating the air button.

Most instruments are one size for all, aka one-size-fits-nobody.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: 1 2 3 4 5 6 [7] 8 9   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal