Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner- Rusted in bellows pins  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Hohner- Rusted in bellows pins
« on: February 19, 2019, 01:10:26 AM »

Recently purchased on ebay...but probably going back to the seller a HA114G "In perfect condition" (among other superlatives) and still in it's original box.

German made. Perfect apart from the minor detail that all the stops except the bass are stuck down -at least one appears to have rusted into the wood...the others may be stuck that way too.
OK- open her up....oh! the bellows pins are rusted in too. One comes out with extreme difficulty...if they are all like that I will almost certainly shear the head off at least one...
Test what I can. The Bass end Fundemental and chord's are good.. but there is a failed or failing reed in the melody chest.

On the positive side the bellows tapes are undamaged, though before I found the problem with the stops I had brushed a bit of mildew and the chrysalis of something out of the bellows folds.
Looks like it had spent some considerable time  lurking , in it's box, in an unheated bedroom in rural Aberdeenshire.

So the question (while I decide whether or not to insist on a return to the seller).... if a bellows pin head does shear off is there a generally recognised way of getting it out without doing serious damage to the casework.

I might be inclined to try making a small drift from a panel pin with the point filed off and driving the pin right through into the bellows. That may work if the pin is already through to the inside of the bellows- but a rust bound pin being driven through whitewood may well rip some big splinters out en-route. Risk of smashing the case work? or are melodeons tougher than that?

Alternatively...

Answers on a post card...
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner- Rusted in bellows pins
« Reply #1 on: February 19, 2019, 03:58:05 AM »

The trick is to just get it moving, try tapping on it (driving it in) then pull on it. Grabbing it with pliers or better yet a small vice grip and twisting it back and forth should get it to move. This will trash the pin but it can be replaced.
 I have found the chrome on the steel German pins to be pretty thin and I often find them rusted (though not this bad) even if the rest of the instrument is fine.
The wood is pine so a bit acidic so hense the rust.

I wax (paraffin wax not bees) the stops and pins when I work on them to slow this down.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner- Rusted in bellows pins
« Reply #2 on: February 19, 2019, 07:12:05 AM »

Also use some heat on the pin before trying to move it.  A hot soldering iron pressedonto the pin can help. Leave it on long enough for the heat to travel the length of the pin.

The “accepted methods” will all be aimed at avoiding the heads coming off.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Hohner- Rusted in bellows pins
« Reply #3 on: February 19, 2019, 09:53:14 AM »

Recently purchased on ebay...but probably going back to the seller a HA114G "In perfect condition" (among other superlatives) and still in it's original box.
if you are planing to send it back don't do anything and get your money back ;) if you can't even pull the bellows pins out and unable to move the stops due to rust what is the condition of the reeds I wonder?.getting one of this back to proper playing condition will cost you good amount, don't ask ho I know  8) ..if you got it for bargain price and willing get it fettle properly/professionally than yes keep it...paid a lot and still needs a lot of work ? just send it back end-resold isn't going to justify the time or the money you'll have spend, do noting and send it back.         
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner- Rusted in bellows pins
« Reply #4 on: February 19, 2019, 10:01:30 AM »

I agree with invadm. If the pins are rusty and the stops are rusty the chances of rusty reeds is very high. If the reeds are rusty they will all have to come out and be cleaned thus requiring them being rewaxed and, in a hohner 1 row 4 stop, that is probably the hardest and most frustrating rewax to achieve.


But if you chose to go ahead I can give you advice on the rewaxing.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner- Rusted in bellows pins
« Reply #5 on: February 21, 2019, 01:00:17 AM »

Thanks for all your responses.
I think the box is going back but am still discussing with seller the possibility of a partial refund instead of just returning it.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal