Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5 6 7   Go Down

Author Topic: Hot Rod your Hohner  (Read 25497 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hot Rod your Hohner
« Reply #60 on: March 24, 2019, 11:11:01 AM »

Lester's wife's embroidery material as a grille cloth works well becuse it is quite stiff and holds its shape nicely while you are fixing it.

If you are thinking of using the stuff from Charlie Marshall (which is good and available in different colours, weaves and textures), it tends to be more floppy and slightly more fiddly to deal with. A good tip I had from Martyn White is to brush the grille lining with a 50/50 solution of white PVA glue and water and then hang it up to dry. This renders it stiffer and easier to cut to size and to handle. Once it is dry and cut to shape, use the same dilution of PVA/water to fix it to the inside of the grille. The wet cloth expands a bit and looks all wrinkly at first (a bit like me) but shrinks back again on drying so you get a nice taut finish. With the floppy stuff, it's best to brush the dilute glue all over the inside of the grille, not just the edge, otherwise the grille cloth may sag in the middle and possibly foul the pallets. It's essential to do this anyway on curved grilles (e.g. Ericas).

One more thing to be aware of is the porosity of your chosen cloth. Again, Lester's cloth is good because it has a very open weave, but other types of lining may not be sufficiently porous to allow proper air flow through to the pallets (and hence the reeds). Commerical grille cloth will be OK, but think carefully before using that odd remnant of pretty floral curtain material which you just happened to have going spare. It may mute the sound or restrict the air flow.  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hot Rod your Hohner
« Reply #61 on: March 24, 2019, 11:20:30 AM »

I use starched mull from here https://vintagepaper.co/collections. They also do some lovely papers, that I'd like to see on bellows.


SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hot Rod your Hohner
« Reply #62 on: March 24, 2019, 11:24:07 AM »

I use starched mull from here https://vintagepaper.co/collections. They also do some lovely papers, that I'd like to see on bellows.
That's a great site! Thanks for posting. Agree about the papers - they are lovely.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hot Rod your Hohner
« Reply #63 on: March 24, 2019, 03:12:04 PM »

Lester: a "family" question

If wanting to bush the bass buttons on an Erica, any reason why the same process would not work?  Or better to drill the celluloid with a 10 mm bit?  I fear either could be ugly... 

Thanks!
--Steve C


I do exactly* the same job with the same tools on Ericas. Just go gently to prevent any chipping of the celluloid.
I tried drilling out the holes. Unless you fancy a job of rebuilding the button step out of matchwood I suggest you learn from my mistake.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Hot Rod your Hohner
« Reply #64 on: March 25, 2019, 10:19:52 AM »

Does it get any more exciting - Retaping the Bellows
That's the one I've been waiting 30+ years for...Thank you...I think... :|glug :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hot Rod your Hohner
« Reply #65 on: March 25, 2019, 11:57:40 AM »

Thanks, P&T, noted. No reason not to use the reamer.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hot Rod your Hohner
« Reply #66 on: March 27, 2019, 07:05:34 PM »

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hot Rod your Hohner
« Reply #67 on: March 27, 2019, 07:35:38 PM »

Thanks Lester, well done. Handy that you had a couple of glitches, so that you could show how to get round the problems,

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hot Rod your Hohner
« Reply #68 on: March 27, 2019, 09:56:23 PM »

Thanks Lester, well done. Handy that you had a couple of glitches, so that you could show how to get round the problems,

SJ
Absolutely. Good to see the potential issues resolved. Thanks for doing these.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Hot Rod your Hohner
« Reply #69 on: March 28, 2019, 05:35:35 AM »

  • Anything else I have to do to the box
I have used a 'electronic drug dealer scale' to measure/set up button pressure, quite a faff.

I don't suppose that you intend doing any adjustments to the springs on the box you are currently
working on, but if you had time at some stage, an explanation or demonstration of how this process
works would be appreciated.

Thanks for this series of videos. Very informative.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hot Rod your Hohner
« Reply #70 on: March 28, 2019, 07:50:05 AM »

Very helpful and a good tip about the leather washers.
One thing I'd not be happy about is the cup washers. I've used these many times, but in any kind of stress or movement, I have found these to distort. I'd replace them with some M5 or M6 standard steel washers.
However, the stresses on a keyboard might be minimal and my caveat might be totally unnecessary.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hot Rod your Hohner
« Reply #71 on: March 28, 2019, 08:57:21 AM »

Yes the leather washers is something I do too. Another method is to seal them off with a capping of hot wax.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Hot Rod your Hohner
« Reply #72 on: March 28, 2019, 10:02:48 AM »

Episode 2 - Refacing the treble pallets.

In which I speak and prove that I have difficulty converting a cogent sequence of thought into a sentence, you'll get the drift :)


https://youtu.be/g7nVDIXF3qc


Lester, first of all, thank you for these videos, it's great content!

Something is not clear for me in this, it's the question of the angle created by the addition of thickness of the pallets, that needs a bending of levers to compensate (see attached picture). Is that what you do when pressing the button hard and blocking the pallet with the other hand? Or is that for another reason? In which case the "sponginess" of the felt "absorbs" the angle (meaning you have more compressed felt near the interior)?

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hot Rod your Hohner
« Reply #73 on: March 28, 2019, 10:46:57 AM »

I wish I could do drawings like yours to illustrate my point, but I can't. Just visualise, that when you place the refaced pallet in position over the relevant hole, and rest the lever in the slot, that because the pallet is thicker, it pushes the lever a bit higher off the fondo. As you haven't done anything to the lever, this will mean that the point of contact between the lever and the pallet will be a slightly different angle. However the spring pressure remains the same, so it is holding the pallet flat against the fondo. So if you follow the situation over 90 degrees, then the button will be sitting lower, and needs raised to suit. Once this is done, you glue the lever to the pallet. Remember that the pallet is still being held flat, at the same pressure, and by fixing it while in that position, you maintain that angle. So there should be no question of the pallet sitting on the fondo, at an angle.

Hope you can follow that.

Sir John
« Last Edit: March 28, 2019, 05:12:15 PM by John MacKenzie (Cugiok) »
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hot Rod your Hohner
« Reply #74 on: March 28, 2019, 02:17:54 PM »

Do you have anything on replacing broken springs, Lester?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hot Rod your Hohner
« Reply #75 on: March 28, 2019, 04:37:23 PM »

Thank you Sir John for the clear explanation saved me having to think it through.

Once I've finished the current set of videos, with the tuning video I intend to do some simple fix videos such as broken springs

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Hot Rod your Hohner
« Reply #76 on: March 30, 2019, 10:06:47 PM »

Encouraged by this series (and by the fact that I've finally got pallet facing material) I've started working on refacing the pallets on my Hohner Club IIB Victoria box and I thought I'd share the issues I've encountered (if I have more stuff I'll probably make a new thread).
Getting the keyboard off was a bit tricky, I've opened some screws I didn't have to (no idea what they were holding in place, but they're back holding it now) but all in all applying gradual force and some careful wiggling of levers is enough to get it out.

The more serious problem was the fact that the pallets just wouldn't come off. Fortunately the search function of the forums rescued me by recommending using a soldering iron to weaken the glue. For most pallets a slow swipe of the iron on both sides of the lever were enough to tear this white circle and melt the glue so a determined thumb could dislodge the pallet.
If you do this, remember that soldering iron and wood do not mix well as can be seen by the attached picture. The pallet wood is quite fragile and the soldering iron will happily eat through it.
I don't think this will affect playing in any way, but it's not going to be the prettiest box under the grille.
The bottom row of pallets is a bugger to remove, but pressing buttons to move the adjacent levers makes it slightly easier.

The stronger glue also has the disadvantage that cleaning it off of the pallets and the levers is more time consuming. I suspect I'm going to compromise there a tiny bit as long as the levers fit nicely into the pallets.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hot Rod your Hohner
« Reply #77 on: March 30, 2019, 10:15:27 PM »

Well the method I use when the glue is hard to shift, is to run a scalpel down either side of the lever. on the back of the pallet,, which is usually enough to encourage the disc of material to split down both sides of the lever, leaving you a wee bit to scrape off, later.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Hot Rod your Hohner
« Reply #78 on: March 30, 2019, 10:20:43 PM »

Well the method I use when the glue is hard to shift, is to run a scalpel down either side of the lever. on the back of the pallet,, which is usually enough to encourage the disc of material to split down both sides of the lever, leaving you a wee bit to scrape off, later.

Sir John
Unfortunately the glue was laughing at my scalpel. I'm not 100% sure if it's the glue's fault or the scalpel's :)
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hot Rod your Hohner
« Reply #79 on: March 30, 2019, 11:27:21 PM »

Funnily enough, I'm busy doing the same to one of mine. I found that placing the soldering iron on the actual lever was the job. The metal lever heats up and the pallet pulls off easily, complete with the fabric dot. The b****r is getting the glue off the pallet!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: 1 2 3 [4] 5 6 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal