Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Carbon fiber instead of brass rod for keyboard axle  (Read 2730 times)

0 Members and 1 Guest are viewing this topic.

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Carbon fiber instead of brass rod for keyboard axle
« on: September 05, 2019, 01:55:46 AM »

Hey everyone,
Partly I wanted to show how beautiful this 12 button bass box is  :D ...

But the other part is I want to know how badly I may have offended the melodeon gods by substituting carbon fiber rod for the brass I struggled with to remove from my keyboard action.  I looked all over trying to find the proper material, but stumbled across this and how it is used by model airplane enthusiasts.  Having 10 pieces now in hand I can't overstate how excited I am with this material.  I can put a bow into it to put in my transport pack when I take a project with me, yet it returns immediately to a perfectly straight condition.  I've even been a little rough with it, as I have spares and wanted to see just where it will yield.  It sure makes inserting back into place much easier.  Some of you are probably asking what my plan is for keeping it in place.  Well, I'm thinking I will chamfer the ends of the thru hole and drop a spot of wax. 

Here's the product on Amazon:

https://www.amazon.com/dp/B07PB3VHTR/ref=cm_sw_em_r_mt_dp_U_TNfCDbT9DSG58

Okay, slam away...

Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #1 on: September 05, 2019, 08:37:44 AM »

No need for slamming.
There is no reason not to try the carbon fibre rod. So long as it is a free but not a sloppy fit through the axle holes and lever arms it should be fine and, as you say, it has the advantage of not risking permanent distortion as you insert the rod.

As for keeping the rod in place once inserted, I don't think you need worry; there should be enough friction to hold everything in the right place.

I would suggest making the rod slightly longer than the keyboard length so that there is a protruding end. This is so you have something to grip with pliers if/when you need to remove the rod at any point in the future. The protruding end need only be a few millimetres and can be covered up with an axle rod end cover as found on many Italian boxes. Available from Charlie Marshall (he ships internationally).

Let us know how you get on.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #2 on: September 05, 2019, 09:48:09 AM »

Interesting idea to use carbon fibre.   The additional stiffness must be a good thing.  I very precise fit in the holes in the keyboard and the levers is critical to a good action.  Too tight and keys don't move freely, too loose and the keys and pallets will have too much sideways movement.  Keys will fell sloppy, and pallets may hit each other.  I wonder how carbon fibre surface will wear in contact with wood?   Only time will tell.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #3 on: September 08, 2019, 06:00:38 PM »

Carbon fibre is a reinforced epoxy resin, which is very stiff and light -- but these aren't really the desirable qualities for an axle rod, you want something which is smooth and hard-wearing when in contact with whatever pivots on it -- either wood or a metal alloy, depending on what type of action is used -- and which doesn't corrode. The general engineering principle for long-lasting bearings is that one surface should be as hard and smooth as possible and the other softer, this is why case-hardened steel is common for one and either brass or something even softer like white metal for the other.

For melodeon actions the lever (wood or alloy) will usually be the softer of the two, so the best material for the other is probably something like a hard chrome/stainless steel -- whihc is what is normally used. CFRP is both softer and rougher so is likely to wear faster, its advantages of high stiffness and low density are of no advantage here. It also has much lower crush strenth than stell, which could lead to probelms in future trying to grab the end of the rod and pull it out if the mechanism has tightened up.

For making the case these are some advantages for CFRP, but again only if the design is changed to take advantage which means making it much thinner and possibly with reinforcing ribs -- the one Doug Briggs made was the same thickness as wood which means it was incredibly strong but also no lighter than wood. But if you read up on the desirable material properties for making stiff panels (see J E Gordon's fantastic books on structures and materials) then it turns out that wood is better than almost anything else, including carbon fibre...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #4 on: September 08, 2019, 08:48:11 PM »

I use stainless steel.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #5 on: September 09, 2019, 06:55:15 PM »

Okay, I'll use the carbon fiber for temporary fit-ups (since I've already got them and they are a joy to use) and upon searching more for this size in stainless (thank you, Rees) I only find welding wire.  Eureka!  I work for a fabrication company and our welding department has stainless welding wire in the proper diameter all day long.  Funny how sometimes you can look the world over and the item you need is in your own back yard.  Thanks again, everyone!
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #6 on: September 13, 2019, 04:10:30 PM »

Okay, I'll use the carbon fiber for temporary fit-ups (since I've already got them and they are a joy to use) and upon searching more for this size in stainless (thank you, Rees) I only find welding wire.  Eureka!  I work for a fabrication company and our welding department has stainless welding wire in the proper diameter all day long.  Funny how sometimes you can look the world over and the item you need is in your own back yard.  Thanks again, everyone!
Stainless steel welding wire is easily available cut to 330mm lengths in 1.6mm and 2.4mm diameters for only a few pounds... :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #7 on: September 13, 2019, 04:33:09 PM »

Had our welding engineer go downstairs and cut me a few lengths here at work.  What I was looking for was "beneath my feet" the whole time.  Yes, it will be stainless welding wire this weekend, carbon fiber for fit-up only.  Thanks everyone!!
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #8 on: September 13, 2019, 05:53:10 PM »

Had our welding engineer go downstairs and cut me a few lengths here at work...

Shhh! Your Commodities Manager will hear.  >:E Unless that is you.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #9 on: September 13, 2019, 06:00:14 PM »

Shhh! Your Commodities Manager will hear.  >:E Unless that is you.

Eh, these squeeze out and discard that much (if not more) every time they change a tip on the welder.  I could start a side business.
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #10 on: September 13, 2019, 06:33:59 PM »

Shhh! Your Commodities Manager will hear.  >:E Unless that is you.

Eh, these squeeze out and discard that much (if not more) every time they change a tip on the welder.  I could start a side business.

I used to know a chap who talked, very quietly, about the time he spent in a factory making microchips. The chips connected to the pins by welding a gold wire link.  When a reel was replaced the equipment did a slight overfeed of wire that had to be trimmed off. Apparently they called it their Christmas bonus.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #11 on: October 04, 2019, 07:58:49 PM »

I second the use of a hard stainless rod. I would polish the hell out of it before installing for longer wearing of the wood parts. I am pretty sure the wear characteristics of the carbon fiber rod would not make it a long term candidate in this case.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #12 on: October 04, 2019, 08:50:51 PM »

I assembled using the carbon fiber, and then inserted the stainless gently as I backed out the carbon fiber piece.  Worked very nicely and I was able to make the little curl on the end as was in the original brass.  Thank you everyone for the guidance! 
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #13 on: October 04, 2019, 09:30:12 PM »

Related question.

I have a box to repair where the holes in the wood levers have worn so badly that the pallets move sideways enough to hit and sometimes prevent closure.  I have some new ground steel bar that is nominally 2mm, but actually measures 1.95.  I have found some brass bushes with 2mm bore that I can’t measure but is certainly not less that 2.00.  Result I still have some sideways movement.

Any suggestions?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Scotty Gring

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Try putting a piano in a gig bag.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #14 on: October 04, 2019, 10:07:35 PM »

I'm seeing a little movement in mine but I haven't re-attached the pallets permanently yet and was wondering if I will need to use some stainless steel shim stock to mitigate some of the "wiggle." 
Logged
Proving each day that, just like golf, merely possessing the equipment
in no way guarantees you have any idea what the hell you're doing.      ¯\_(ツ)_/¯

Hohner 1040C, 2815G/C (pre-Pokerwork), Hohner A/D 21/12 Italienne. Titano Titan Piano Accordion (with apologies).

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #15 on: October 04, 2019, 10:09:12 PM »

Being a butcher; I'd probably do away with the bushes and file a reaming flute into a bigger rod, ream the whole lot out in one go and then use the unfluted remainder of the rod as an axle. 
Easy Peasey! (But then I don't work on expensive boxes belonging to other people!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #16 on: October 04, 2019, 11:22:09 PM »

Reboring is pretty standard practice. If one if only one or two are really wobbly I often roll a paper piece and put it in the hole ,spread it out against the sides of the hole with a rod then flood the hole with super glue , wait about 30 seconds and blow the remaining glue out with a straw and my breath. let harden for an hr then rebore to old size.
 Use a new rod though since it does get worn down and will not give good results if it is.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #17 on: October 05, 2019, 12:03:01 AM »

I quite like Winston's advice. However reaming out the whole lot seams quite time consuming.
Some time ago I did this kind of repair. Original rod diameter was 2 mm. Used a 2.3 mm bicycle spoke as a drill (the old rod still in place) - and put in a 2.5 mm steel rod.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #18 on: October 05, 2019, 03:16:44 PM »

Related question.

I have a box to repair where the holes in the wood levers have worn so badly that the pallets move sideways enough to hit and sometimes prevent closure.  I have some new ground steel bar that is nominally 2mm, but actually measures 1.95.  I have found some brass bushes with 2mm bore that I can’t measure but is certainly not less that 2.00.  Result I still have some sideways movement.

Any suggestions?

Unfortunately it's my Oakwood that Theo's referring to :-(

I'm surprised that 50um clearance is still a problem; if the levers are 5mm wide (my guess) this would allow a sideways movement of +/-1mm on a 100mm long lever, which should be small enough to stop the pallets catching. But then I don't have the bits in my hand and Theo does...

BTW it looks like some of what is sold as "2mm" stainless rod might actually be "14 gauge" which is 0.078" diameter, a little bit smaller than 2mm...
« Last Edit: October 05, 2019, 03:30:19 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #19 on: October 05, 2019, 04:41:55 PM »

"reaming out the whole lot seams quite time consuming."

On the contrary, TomBom. Once the reamer is made, it only takes a few minutes to twist it through all the levers and keyboard spacers when they're all married together. The picture below was the first one I did like this, but I realised that it's easier again to do it with the levers already in place.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal