Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Saltarelle Irish Bouebe overhaul and conversion to D/C#  (Read 4169 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #40 on: February 10, 2020, 07:25:20 PM »

Perhaps bu tuning after the holes are in their final form, rather than before a significant alteration.

But the tuning is currently how I like it. M reeds are tuned to 440, and the M+ reeds are in the range of 441. I tune the individual banks one at a time, and then listen with my ear to make sure I’m happy with the result. In order for me to even get *any* tremolo with the two sound holes connected as one, I would have had to do something crazy like tune the M+ reeds to 444, or 445 or who knows what in order to try and ‘break’ them apart, at which point the tremolo may be much more than desired.
Logged
C#/D player

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #41 on: February 10, 2020, 10:06:32 PM »

Bearing in mind I have no experience in physics, acoustics or any practical experience, could it be something like the Millennium Bridge problem - that the sympathetic vibrations on the thinner piece of wood start to feed back into the vibrations elsewhere? The bridge effect was that movement in the bridge encouraged the pedestrians to walk in time, building upon the resonance already created by the bridge movement etc. (Sorry if I've used the wrong terminology).
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #42 on: February 10, 2020, 10:47:25 PM »

If it's of any help to hear it from another person, my 3v Oakwood is tuned to a similarly low beat rate, has these (complete) cutouts on the lower pair of M reeds, and has 2 arms connecting all 3 of the blocks.

Also, it's been very interesting to read your experiments with this.
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal