Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacing pallet felt/leather on a Schwyzerörgeli  (Read 1014 times)

0 Members and 1 Guest are viewing this topic.

Tim V

  • Member
  • *
  • Offline Offline
  • Posts: 16
Replacing pallet felt/leather on a Schwyzerörgeli
« on: February 19, 2020, 10:23:16 PM »

On my Schwyzerörgeli one of the leather pieces on a treble pallet has become detached meaning that the pallet does not close properly and the note sounds constantly. The felt is still attached. As luck would have it the pallet in question is in just about the most awkward position possible. It's in the middle of the bottom row and direct access is blocked by the pallet levers from the first and second rows. See attached photo.

The way that the mechanism works is by depressing the third row key (circled in red), which lifts the pallet (circled in green) via a black plastic coupling (circled in blue). The pallet itself is mounted on a long lever coming down from the very top of mechanism (circled in yellow).

If at all possible I would like to avoid having to remove the keyboard axle/spindle (circled in purple) and doing a complete strip down and rebuild of the keyboard. I am thinking of the following approach and would appreciate any advice from anyone has worked on a similar mechanism.

My plan is to slide up all the black plastic couplings (circled blue). This will disengage all the third row pallet levers (circled green) from the bottom row of pallets. I'll then unscrew all the screws holding the long levers (circled yellow) in place. I'll then lift the long levers and pallets straight up, sliding them under the pallets of the first and second rows. Clearance will be tight but hopefully doable.

Are there any alternatives which I haven't thought of? While I have the pallets out I will re-glue all the other felt and leathers.
Logged
Hohner 1040 G
Hohner Panther GCF

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #1 on: February 19, 2020, 10:38:40 PM »

If you follow your suggested method you might find there in insufficient space to extract the pallet from behind all those levers.  My first attempt would be to use some long pointed tools, maybe tweezers, to manipulate the loose leather back into position.  Do it dry first, and if you can get it to the right place take it out, apply glue and put it back.  If that is not possible you may just have to pull the axle rod.  It’s not that difficult as long as you can release the springs first.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tim V

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #2 on: February 19, 2020, 11:43:54 PM »

If you follow your suggested method you might find there in insufficient space to extract the pallet from behind all those levers.  My first attempt would be to use some long pointed tools, maybe tweezers, to manipulate the loose leather back into position.  Do it dry first, and if you can get it to the right place take it out, apply glue and put it back.  If that is not possible you may just have to pull the axle rod.  It’s not that difficult as long as you can release the springs first.

Thank you for the suggestion. I will have a go with tweezers first though it is a pretty tight fit. It will be great if I can glue it back on without having to disassemble anything as the action is otherwise working very nicely.
Logged
Hohner 1040 G
Hohner Panther GCF

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #3 on: February 21, 2020, 05:32:53 PM »

I second Theos method.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #4 on: February 21, 2020, 06:11:33 PM »

you might want to practice first with a similar piece of material to save folding or tearing the original. You will get it in eventually
Logged
Mark Taylor
Folkloristmark

Tim V

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #5 on: February 22, 2020, 01:22:49 AM »

Thanks all, I've managed to replace it. Hooray!

I ended up having to unscrew the plate at the top holding the long levers and was then able to ease out the individual pallet lever in question. In the process of doing that a couple of other leathers came loose. Feels like they're dropping like flies. Although I've managed to reglue them airtightness and compression have suffered. I suspect this is because the felt/leather has become compressed over the years and isn't springy enough to form an effective seal. There's a fairly deep indentation on each leather where it's been pressed against the air hole.

One of the pallets no longer seals properly even with the leather glued back in place so that note now sounds all the time. Thankfully it's not that important a note so as a temporary fix I've taped over the hole to prevent it from sounding. With this the instrument is at least playable again.

I think this is a a sign that the felt/leather needs replacing on all the pallets as a longer term solution. It looks to be about 4-5mm thick in its current condition so I imagine it was thicker originally. The best match I've been able to find are these ready made pallets from CGM:

http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#5

They are 12mm wide which matches perfectly and 5.5mm thick. Also exactly the same colour which is promising. Although I'm in the USA I think I'm going to order them from him as I haven't been able to find an exact match from a supplier here.

What glue is recommended for gluing felt to wooden pallets? I used Hohner valve glue from CGM for the leathers.

To replace the felt/leather I'm proposing removing the pallets from the levers and then waxing them back on rather than disassembling the keyboard and leaving the pallets attached to the levers? Is that the right approach?
Logged
Hohner 1040 G
Hohner Panther GCF

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Replacing pallet felt/leather on a Schwyzerörgeli
« Reply #6 on: February 22, 2020, 01:41:12 AM »

Regular school white / paper glue works or wood glue, less is better here , a light coating on the wood then stick it to felt side of new leather.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal