Yep, just pull the pin out and the keyboard will do the same as a grenade does when you pull out the pin.
But in all seriousness this is what I do
0) Remove the grill
1) Make little masking tape labels to label the buttons, all the keys are different and need to go back where they came from
2) Grasp the end of the axle and twist/pull, it will be very hard to move as it has 21 sprung axles bearing on it.
3) As the axle withdraws catch the mechanisms as they are freed
4) Do whatever yo want to do to the mechs
5) Insert the axle and then (this is the really hard bit) reinsert arm No.21 and align the axle and the arm pivot hole and push in the axle. This gets increasingly difficult as the number of arms increases, I have found that attaching an electric variable speed drill to the axle makes reinserting it easier. MAKE REALLY SURE that the hole and the axle are aligned before using any force/rotation as you can damage the arms.
6) Try to decide whether this was all worthwhile.
If that has not put you off the story from Rees Wesson who on finding a jammed axle had to connect a car battery across it until smoke poured out of the mechanism to get the axle to free up may also help.