Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wood supplier  (Read 1242 times)

0 Members and 1 Guest are viewing this topic.

Emi nabius

  • Member
  • *
  • Offline Offline
  • Posts: 12
Wood supplier
« on: February 27, 2020, 03:37:11 PM »

Hello everyone! I want to start making my first box and i'm a little bit lost about where to find wood. Does anybody know some place in Spain or France? Also, for the box itself, do you start with plates or with big planks?
Thank you
Emilia
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Wood supplier
« Reply #1 on: February 27, 2020, 04:05:06 PM »

A good starting point would be for you to contact Emmanuel Pariselle who runs the well-known melodeon building courses in France and England. Even if you don't want to go on one of his courses (they are very good indeed), I'm sure he could help you source suitable wood and components in France.

He lives near Poitiers and hopefully someone will be along shortly with his e-mail address or other contact details.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Wood supplier
« Reply #2 on: February 27, 2020, 05:55:44 PM »

You could contact a local luthier (guitar maker) to find out where they get their timber. It is often referred to as 'tonewood', which would probably be suitable to make a case, if it is, say 3 or 4 MM thick. Or look on eBay for tonewood or planed timber.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wood supplier
« Reply #3 on: February 27, 2020, 06:53:52 PM »

If you only have basic tools then the most important thing to look for is wood that is the right thickness for the main carcase of your instrument.  You can do the rest of the cutting with small machines, or with hand tools. Have you tried doing a search on line for timber merchants in your locality?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Wood supplier
« Reply #4 on: February 27, 2020, 07:26:15 PM »

Logged

Corinto

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 233
  • Spain/Brasil/Belgium
Re: Wood supplier
« Reply #5 on: February 27, 2020, 08:26:43 PM »

Spain
https://maderasbarber.com/en/

Yes, MADERAS BARBER is the one I have in my bookmarks. 
Logged
Carpe diem, C.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Wood supplier
« Reply #6 on: February 27, 2020, 10:52:20 PM »

If you only have basic tools then the most important thing to look for is wood that is the right thickness for the main carcase of your instrument.  You can do the rest of the cutting with small machines, or with hand tools. Have you tried doing a search on line for timber merchants in your locality?
I'm using basic tools on my box.
A table saw, drill press, router table, and some smaller tools.  The best is the Japanese power saws or razor saws, these are great for working on reed blocks.
Loads of uses!!

I did my frames / casework by simply running the stock though my table saw set to half the height of the piece being cut (its safer) and set to the thickness needed  , then belt sanded that side flat. This side becomes the inside of the box. mine frames were  2.5 inches tall to start.
Its a small piece and doesn't need much sanding, assuming you have a good setup on your table saw, square, parallel, etc. and keep things tight to the fence.

edit to add : I use a planer blade on my table saw (all the time) it leaves a smooth surface when use properly.
« Last Edit: February 27, 2020, 11:58:25 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal