Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Refurbishing a vintage Hohner  (Read 698 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Refurbishing a vintage Hohner
« on: March 19, 2020, 12:29:46 AM »

I received in the mail today a customer's old, pre-WWII 2-row Hohner for repairs.  Given the age, I assumed it was going to be in very rough shape, but upon receiving the box I was surprised to discover it in almost unused condition!  It is an absolute beauty of a box and has a wonderful, sweet tone that I would say is unrivaled by later Hohners.  It's pretty airtight and decently in tune, considering the age, however it does need all new valves and a proper tuning.  Instead of wax, I found that the individual zinc reedplates were screwed down onto a leather gasket.  Would this have been original?  I was also surprised to discover the tuning of the on-pitch reeds to be averaging around 440.  Would this tuning have been used at the time?  The owner says he acquired the instrument along with its original instruction booklet, and that it is from 1929.  I can't confirm this, but I've attached a photo and maybe someone else can?

The customer sent the accordion for a tune-up and to fix any other issues that I could find.  At the time I told him it was quite likely that it would need a full overhaul, but now I'm not so sure.  What I am wondering is how much of it I should refurbish at this point...I would like to retain the tonal quality of the instrument, so I don't wish to replace the gasket material with wax.  Currently, the leather material that is fitted on the blocks seems to be doing its job...is it necessary to replace this? Under normal circumstances I probably would anyway, but I haven't got any on hand and it would take several weeks at least to get some in, not to mention I've never used it before.  In this case, if it's working, might it be OK to just leave it as it is?  The reedplates pop off and the gasket material stays intact.

Given that the instrument appears to already by fairly airtight, would there be good reason to replace the leather/felt on all of the pallets?  They are currently not leaking any air, so unless the owner of the instrument is interested in quietening the action, could it just be left as it is?  Althought it's not leaking, the bellows gasket material looks worn and so I will replace this regardless.

I guess I'm wondering what best practice is in a case like this...it really is a wonderful instrument, and I'm hesitant to do any unnecessary work.  Thoughts?

Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Refurbishing a vintage Hohner
« Reply #1 on: March 19, 2020, 12:32:34 AM »

More photos.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurbishing a vintage Hohner
« Reply #2 on: March 19, 2020, 07:00:05 AM »

Nice box.

Hohner used reeds pinned onto leather in some of their better quality boxes, so I agree with you in not wanting to change to wax.

You probably need to replace all the valves if there are any valve noises.  Use leather to keep as close as possible to the original sound.

Pallet re-facing on Hohners is usually needed to reduce noise rather than to improve airtightness.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Refurbishing a vintage Hohner
« Reply #3 on: March 19, 2020, 08:44:20 PM »

As Theo says- screwing down reed plates was considered (or at least was adverised as) a more durable construction than waxed in reed pates.

Speaking from a position of ignorance, but it occurs to me that when the international standard concert pitch was changed from A435 to A440 circa 1935 at least some accordion owners would have chosen to have their instruments retuned to the new standard. Th highr the quality of he instrument and the more "serious" the musician the more likely the retune.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal