Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 [6] 7   Go Down

Author Topic: Sorting the sound on a webcam mic?  (Read 17255 times)

0 Members and 1 Guest are viewing this topic.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #100 on: January 05, 2021, 12:03:35 PM »

Can I update my input to this thread as well, since I've started using the Behringer U-phoria UMC404HD audio interface, as recommended by Gena?

It works really well - thanks Gena!

I can plug in up to 4 audio inputs (I choose from mic, guitar, Samson Q1 condenser mic for the box, Beat-root stomp box, and Zoom RC-3 Loop Station to start and stop pre-recorded accompaniment).  I no longer need the audio mixer, and nor do I need the Zoom H2.  I can hear the undelayed mix of these on the headphones, setting the monitor switch to A.  And I can through the same headphones hear the output from the Zoom meeting, and using the mix control, adjust the balance between that and my input.  This means that I no longer have to scrabble about to unplug the headphones from one socket and plug them into another in order to hear other contributors, who may wish to tell me my playing was rubbish, or perhaps tell me the sound was too loud or soft at their end while I'm performing rather than after the damage has been done.  What's more, I don't need to plug speakers in, in order to try to overcome the headphone switching problem - and that means I don't contribute to the Zoom Original Sound problems of awful underwater echo, which many people experience.

Also, for recording into my recording software (I'm using PreSonus), I can now have four separate but simultaneous track recordings (or two stereo).  And finally, the latency, although still noticeable, is about a fifth of what you get with the Win 10 software.

It's actually simpler to use, and very good quality, and I now leave it plugged into the computer all the time for listening to music, etc., abandoning the computer's in and out audio sockets.  It's actually proved to be an excellent faff reduction tool!

Something I have thought about it is effects.  For my guitar I use an effects unit already, but I have wondered whether it might be useful to use the insert sockets to plug in an effects device for voice and/or box.  Any recommendations, anyone?  Nothing fancy needed.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Sorting the sound on a webcam mic?
« Reply #101 on: January 05, 2021, 01:14:01 PM »

Last night, whilst thinking I'd done something terminal and might have to replace the unchargable audio device, I Googled Olympus audio recorder.
The latest model, LS 4, has a hotshoe connection allowing you to attach it to a camera flash shoe and plug it into the digital camera thus recording quality sound alongside your video.
I thought that was neat.

Chris, sounds like you've had a profitable outcome from our in-depth thread!
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #102 on: January 05, 2021, 03:15:09 PM »

I certainly did, and I'm really grateful.

Your hotshoe connection idea sounds great, but I should add this:  My brother-in-law, a great photographer, tried this sort of thing a year or so ago, and found difficulties because of course ideal position for a camera is by no means best position for a mic.  He recorded a festival performance, but although the video was brilliant, the sound was mushy and had too much audience noise.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Sorting the sound on a webcam mic?
« Reply #103 on: January 05, 2021, 03:30:38 PM »

Ah yes, I suspect such a mounted recorder could also pick up lenses autofocussing too.....

Glad you enjoyed the thread journey... it was fun 👍
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Sorting the sound on a webcam mic?
« Reply #104 on: January 05, 2021, 04:34:19 PM »

Something I have thought about it is effects.  For my guitar I use an effects unit already, but I have wondered whether it might be useful to use the insert sockets to plug in an effects device for voice and/or box.  Any recommendations, anyone?  Nothing fancy needed.

Yes, although apparently you need an 'insert cable' - TRS <-> 2 x TS, or what someone might have called a "like a stereo cable on one end to to separate mono left and right on the other?"; see first segment of this video: https://youtu.be/sH5yJ87WGLU?t=60 (linked to start at the 60 second mark)

According to this 3rd-party-made-but-super-accurate-and-informative diagram: https://github.com/mcnster/umc-404hd-signal-path/blob/master/umc404hd.pdf the insert cables are after the mic/instrument preamps, so, I think maybe they would all be line level? I'm not sure if that's a big deal, but, you might.

How do you handle sending your audio out to your Zoom meeting? I've always expected that you would only be able to send input 1+2 or input 3+4, but have never really been in a position test that aspect.


I'm glad it's been working out for you - they're a bit pricey but they do their thing pretty well. A couple of notes:

You may be able to lower that latency in PreSonus, by the way. My ASIO settings are at 128 samples for my buffer and that seemed OK and give about a ~5ms latency that I didn't really notice, and I didn't adventure further than that.

My experience with the device was I didn't have to use the DC power supply provided, and was able to just plug it in via USB and have it work? However, sometimes when I'd turn my PC on, it would also be 'on' but none of the audio aspects would work at all unless I unplugged & plugged the USB back in. Adding the included DC power supply to the equation solved that for me forever and since then it's basically been rock solid.


Regarding recording performances, I bring two tripods, one with the h2n mic which that I stuff in among the band with a low gain so the drums don't clip, and then the other with the camera on (my phone) which I stick out somewhere else. The band mic picks up the instruments, the camera (my phone in this case) picks up crowd noise, stick hits and bells and way too much drum - I always cut the low frequencies on the crowd mic. However, at busy festivals, I won't put my phone on a tripod out anywhere like this unless I can have someone manning it directly - otherwise it's just in everyone's way, and liable to get knocked over or trip someone. So, I send someone out with phone-in-hand and aim to stabilise it later. A variety of results can be found here: https://www.youtube.com/channel/UC-zt5X6HUKd2WJintoOpcwQ/videos

I think a 'microphone in with band' and 'camera on monopod' could be a winning formula, but I've yet to enact that plan, for some reason.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #105 on: January 05, 2021, 05:33:24 PM »

Yes, Gena, I think you're right about the line level, and TRS socket for inserts.  Certainly, that's how I assumed it would work.

The signal goes out to the Zoom meeting via the USB socket, just like I remember you said your Zoom H4 works, but unlike my H2.  It seems to me that all 4 channels get output in this way, and presumably separately too, though I have yet to try the multi-track simultaneous recording claim.

Yes, I could lower the latency in the way you suggest, but I don't think it would easily go down to 3ms, which in an experiment I once found was about my noticeability threshold, so when recording I would still have to shift each track (I thought some DAWs do this automatically, don't they, but I haven't found it in PreSonus yet?)   I did this experiment, by the way, by setting two electronic metronomes to slightly different frequencies, and counting how many apparently coincident beats there were.  My conclusion was that sound sources should be less than about 3m apart in a band if you don't want to have sync'ing issues - or you all need monitors.  When I found this out I was surprised how sensitive it is to spacing, and this has implications for tight playing together, I thought.

My device doesn't seem to work on USB power at all, and to be honest I've never tried it like that.  In fact if I try to open a PreSonus 'song' without the power supply to the U-phoria being on, PreSonus tells me something's missing.

Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Sorting the sound on a webcam mic?
« Reply #106 on: January 05, 2021, 06:33:36 PM »

Yes, I could lower the latency in the way you suggest, but I don't think it would easily go down to 3ms, which in an experiment I once found was about my noticeability threshold

Y'know, honestly, it might? The device being in ASIO mode, having buffers with modestly low sample sizes, and using high sampling frequencies like 48kHz or 96kHz can apparently work very well to drop the real time delay.
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Sorting the sound on a webcam mic?
« Reply #107 on: January 05, 2021, 07:34:26 PM »

using high sampling frequencies like 48kHz or 96kHz can apparently work very well to drop the real time delay.
That’s a bit of a myth. Buffers are used to protect against other processes taking over the computer for too long.
So if, for instance, your buffer is 128 samples and you’re using 48k sampling rate, then in terms of time, the buffer is 2.666 milliseconds long. And if some other process comes along that hogs the computer and locks out the audio processing for, say, 2.5ms then the buffers can continue to flow, and audio will be uninterrupted. 
A buffer of 128 samples at 96k is 1.333 ms - I.e. half the length. So yes you could say the buffer length and the delay is shorter, but it’s less resilient to these other processes, and so when that rogue 2.5ms process comes along , the buffers won’t be able to fill continuously and so you’ll hear a glitch, click, crackle etc.
So yes, halving the sample rate to 96k will half the buffer length, but you’ll need to double it to give yourself the same protection. Some interfaces will do the doubling automatically and change their buffers when you change sample rate.
There are usually two buffers of similar lengths - one for input and the same for output, hence a 128 buffer will usually cause an in-to-out delay of around 5.333 ms at 48k.

As an aside, I would usually record and work at 48k sampling rate where possible. 44.1 is really a compromise for CD, and the very slightly higher Nyquist filter that’s needed for 48k (nyquist limits to a frequency that’s half the sample rate) is generally easier to provide on modest equipment, which makes for a slightly smoother top end.
96k sample rate is great but generally less practical in terms of storage use and ongoing audio/video format conversions.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Sorting the sound on a webcam mic?
« Reply #108 on: January 05, 2021, 07:41:43 PM »

What Penn said, with the addition that if your final product is video you might as well record as 48k sampling rate anyway because that's standard for video. With a bit of luck no sample rate conversion will occur in the whole chain.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Sorting the sound on a webcam mic?
« Reply #109 on: January 05, 2021, 08:20:19 PM »

Cool, so, I guess the 'raise the sampling rate' approach just doesn't help where it counts here (or really all that much at all) then - the enemy is still "total time something else hogs your system", so, I guess 'closing other software' is probably helpful? Thanks - I very rarely use my device in this way so I appreciate the information.

I don't really remember what the defaults were, but I imagine Chris can probably improve his input latency a fair lick - 128 samples at 48kHz seemed to work for me the last time.
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Sorting the sound on a webcam mic?
« Reply #110 on: January 05, 2021, 08:43:59 PM »

There’s a utility called latencymon from resplendence which will do some analysis as to what might be spoiling audio performance.
First thing I do on a new Windows pc is a) turn off CPU throttling b) run latencymon and follow its advice if any.
It’s not so much your other programs it’s usually device drivers (usb, network, graphics etc.etc.) and hidden software that are the culprits.
Macs are quite a bit better in this respect because audio runs at a higher priority in the system.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Sorting the sound on a webcam mic?
« Reply #111 on: January 05, 2021, 08:51:45 PM »

( and on the thread goes.... whatever did I start?  ;D)
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Sorting the sound on a webcam mic?
« Reply #112 on: January 06, 2021, 10:30:34 AM »

( and on the thread goes.... whatever did I start?  ;D)

On my Behringer U-PHORIA UMC404HD (like many other audio interfaces) there's a mix function that takes care of latency when when multi tracking. Turned fully over to one side you hear the playback track only, and to the other side the input signal only, which means that the the input audio is not not going to the computer and back again, so no latency, and giving the ability to adjust the I/O mix to taste. The process is known as Direct Monitoring. 
« Last Edit: January 06, 2021, 10:47:09 AM by BobM »
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #113 on: January 06, 2021, 01:46:57 PM »

Quite right Bob, but the latency issue arises not at the monitoring stage, it's when your DAW receives the digital input translated from your audio signal, while you're trying to play along with a pre-recorded sound which has been translated into audio with latency, so you need to add both latencies together, and shift your new track left by that amount - after you've edited it for mistakes.  Unless your DAW automatically does that for you, and I have yet to find that on PreSonus, you have to do it manually.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Sorting the sound on a webcam mic?
« Reply #114 on: January 06, 2021, 02:06:52 PM »

A good DAW will compensate for latency. To get it right you have to make it run a test with output looped back to input to measure the entire round trip latency. Unfortunately with USB the latency can change randomly each time you switch the system on.

There can be a monitoring issue though. It's very convenient to listen to yourself mixed with the previously recorded parts, all controlled by the DAW, but if you do that, you hear yourself delayed in the headphones. On some systems you can get the delay short enough that it's usable, but if your recording hardware  has a built in mixer like the Behringer unit described, you can do it with no monitoring delay. My own hardware does have a built in mixer, but it has to be controlled from the PC, and in practice having two mixers on the screen gets a bit messy, so I do monitor though the DAW and have low enough latency to get away with it.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Sorting the sound on a webcam mic?
« Reply #115 on: January 06, 2021, 03:27:03 PM »


it's when your DAW receives the digital input translated from your audio signal, while you're trying to play along with a pre-recorded sound which has been translated into audio with latency,

(which

Sorry Chris, I've lost the plot on what you're trying to achieve. I've multi-tracked myself and others many times*, and latency has never been an issue, maybe because all my past three interfaces have had a direct monitor function or using a mixer, another way to achieve that. Your live performance that you should be hearing is a split "send monitor only" signal which is and not the one that is being recorded and returned with the mix, which needs to be muted, so as not to be returned to the headphones. Which version of Presonus are you using, and do you mean Studio One?




Not on the Melodeon though..

Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #116 on: January 29, 2021, 10:21:37 AM »

Sorry BobM, I missed this reply earlier.  My issue was that my recording (PreSonus StudioOne 5 Artist) was getting delayed by in and out latency.  I have now found the (somewhat obscurely documented in the manual) function that automatically shifts the new recorded track to the left to compensate, depending on your selected sampling rate.  I know many people (and the manual) seem to prefer using small reduced latencies if possible, but I can't see too much wrong with the track shifting idea, while listening on the direct monitoring socket on the audio interface.

Slightly better related to the original topic, has anyone found some confusion on the Zoom meeting Original Sound instructions when using multiple channel USB inputs?  When you're in a meeting, and you turn on Original Sound (as I hope most of us are doing?), you get a little dropdown menu to the right of the box notifying you that you're using Original Sound.  This gives the option to select one of your microphone inputs, to turn Original Sound on permanently, but it's none too clear what this means, and the manual doesn't cover it.  In my case, using up to four inputs through my Behringer interface, it tells me I can either select either inputs 1-2 or inputs 3-4, but not both.  So what on earth does this mean?  If I select 1&2, does it mean that anything going into inputs 1&2 will be given Original Sound, while inputs 3&4 will be given the horrible noise cancellation treatment that Zoom imposes?  Or does it mean selecting either will work to give you Original Sound on all inputs?  The manual doesn't cover it, and you can't ask Zoom for support if you're only a freebie user.

Logged

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Sorting the sound on a webcam mic?
« Reply #117 on: January 29, 2021, 10:54:01 AM »

Sorry BobM, I missed this reply earlier.  My issue was that my recording (PreSonus StudioOne 5 Artist) was getting delayed by in and out latency.  I have now found the (somewhat obscurely documented in the manual) function that automatically shifts the new recorded track to the left to compensate, depending on your selected sampling rate.  I know many people (and the manual) seem to prefer using small reduced latencies if possible, but I can't see too much wrong with the track shifting idea, while listening on the direct monitoring socket on the audio interface.


You shouldn't need to have the sound of your live playing going to the DAW and back again, but only the performance of the track(s) that you've previously recorded. The Mix (marked in/pb) control enables you to balance the existing recorded material with your current recording pass, because your live audio hasn't made the journey to the DAW and back.

I hope that this is what you mean, if not, my apologies if I've patronised you.

Bob.
Logged

alexalexander

  • Member
  • *
  • Offline Offline
  • Posts: 43
Re: Sorting the sound on a webcam mic?
« Reply #118 on: January 29, 2021, 11:08:28 AM »

Mention has been made of Focusrite Scarlett and Zoom software and I thought I'd comment on something I discovered this week.  For recording I use a shure mic through a Focusrite Scarlett and have the Focusrite ASIO driver and use AbletonLive (or sometimes Audacity).  Ableton automatically sets the sample rate at 44100 and buffer size 256 samples.  When I used the same set up with Zoom I found the audio was poor with lots of crackles.  I found a solution on Focusrite's website - they suggest using a sample rate of 48000 and buffer size of 192  with Zoom.  Zoom doesn't automatically set the ASIO driver parameters - it's a manual settings change - but if fixed the problem.
Logged
D/G Club with Stradella bass (Mengascini), D/G Club with Stradella bass (Castagnari), Hohner Club IIIM D/G, Hohner 2-row D/G pokerwork, Hohner 1-row C, Hohner Club Bb/Eb,  anglo concertina.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Sorting the sound on a webcam mic?
« Reply #119 on: January 29, 2021, 11:35:59 AM »

Quote
You shouldn't need to have the sound of your live playing going to the DAW and back again, but only the performance of the track(s) that you've previously recorded. The Mix (marked in/pb) control enables you to balance the existing recorded material with your current recording pass, because your live audio hasn't made the journey to the DAW and back.

I hope that this is what you mean, if not, my apologies if I've patronised you.

Ah, yes, Bob, I understand all that.  But there's advantages in listening to yourself playing on headphones while you're doing it.  You can check and adjust a number of things while you're playing - for example LH/RH balance if using a single mic, tone and ambience, and any effects when playing guitars, etc., and adjust your performance to suit.  What's more, you'll need to listen to the previously recorded track on headphones anyway, or you'll get bleed into the current recording.  Sure, you can work round that with single ear headphones, but they're aren't as comfortable or as easy to use as a full headset.   The live audio's journey to the audio interface and back is not subject to any noticeable latency because it's just an audio signal - not converted into digital and back - that's the beauty of directly monitoring  the input signal, isn't it?
Logged
Pages: 1 2 3 4 5 [6] 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal