Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Balancing left hand and right hand side of a box  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Balancing left hand and right hand side of a box
« Reply #20 on: May 11, 2020, 03:40:17 PM »

You could also try limiting button travel on the bass buttons only, thus reducing the distance the pallet lifts and also reducing noise. Another - reversible ,but much more labour intensive solution would be to aquire (or make)
a spare bass reed block and put in physically smaller reeds - weighted to same pitch - or tuned an octave higher if you like a lighter bass sound (like me). After messing about with a box for months this is what I ended up doing  and I,m happy with it now.   Good luck - John
  PS , on another box ,changing the material  covering the holes was enough to balance the sound.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #21 on: May 11, 2020, 04:24:47 PM »

More thoughts:

Cloth or similar materials absorb the higher frequencies and have exponentially less sound as the frequencies get lower.  The longer low frequency waves require depth to be really effective, the point being that care must be taken to avoid tonal imbalance low to high in the LH sound.  Baby : bathwater.

Then there's the issue of what makes it seem loud.  I find that a no thirds option changes things quantitavely as well as qualitavely.  So my next question would be
regarding the voicing in the LH.  None of my boxes have in/out options for thirds, but I do have a no thirds box and the Pokerworks G/C I use for my videos has the third taped out on the D chord as the f# reed cracked.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Balancing left hand and right hand side of a box
« Reply #22 on: May 12, 2020, 01:14:27 PM »

"tonal imbalance low to high in the LH sound.  Baby : bathwater."
Agreed, but if a change makes the general sound or "playability" worse then you obviously would not keep it - which is why it  needs to be reversable - eg like temporarily blocking off some holes in the bass plate.  The bass side probably sounds great on its own but thats no good if its drowning out the treble side, so you have to sacrifice something of that perfection to achieve balance with the treble.(without more drastic reed changing etc.)  Taping out the thirds makes a huge and obvious difference and would be the first thing to try - less air used + musical flexibility.   Without a built-in graphic equaliser its a bit of a minefield and will certainly while away many hours of lockdown time. Good luck.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #23 on: May 12, 2020, 01:30:22 PM »

I'm not a fan of thirds. Personal choice, but they tend to get in the way of the chords I like to build with the LH. So I either have them switched off or in the case of the Rik, taped.

It's been interesting seeing the different views on this subject. As JNM SY says, if a fix makes a box more playable to you then it's worth keeping. The key is that it is reversable. I think I have a suitable bit of material so weather permitting I'm going to try and sit in the garden later and have a tinker. I shall update with the results of my tinkering.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal