I am still working on my 16 bass 1900 Italian box. The heat is making it feel at home.
The 'low' 8 reeds are on big plates, narrow reed tongues and +/-, 2.5" long.
They share a block with standard size, more typical bass reeds which are fairly straight forwards to get to sound and speak pretty quickly at their requisite pitch. In sharing their block - unlike a Hohner, say -,they have a double row of Fondo holes rather than a large shared one, so they have independent 'air' as such.
At what point in the 'draw'/push, on the tuning table, should these big/low reed's reach (tuning) pitch ? Being so long/big, they inevitably start short - arrive - and are inclined to go past. The biggest are slowest, so I assume there is a balance to be struck.
In simple terms ( the less numbers involved the better ) where in the 'flow' should I be aiming to see the +/-

appear on my Tuner.
I am guessing there are three potential options ? As soon as possible - on the basis that by the time they start to go sharp I will have moved on.....ending there, irrespective of the flat start......or mid-flow, allowing for variance in playing and the best ( and worst ) of all worlds.
cheers, N