...I also can't see how a reed would break in to being in tune.
It's possible; it depends on how much and in which direction (i.e. sharp or flat) the reed is out of tune.
The reeds on new instruments, or newly tuned instruments, do settle down after a short time to achieve a stable pitch. Usually it's just a few hours but it can be longer. I think it is to do with the stresses in the steel gradually equalising as a result of the vibration cycles. Thats why, after doing any reed work, it's always worthwhile playing the instrument a bit, then letting it settle for a day or so, then checking again and adjusting if needed. Once settled or 'played in' if you like, reeds tend to go a bit flat with time (months/years) depending on how hard they are played.
There are other factors which can affect and vary the pitch of reeds on new instruments:
Sometimes the valves need to settle down too. A newly attached, or slightly stiff valve might not open quite as far as a valve which has been in place for some time, which in turn can affect the pitch. A reed which has been tuned to be at pitch with a new valve can theoretically go a bit sharp if the valve then gradually becomes more pliable and opens slightly more.
Another instance I've noticed is the the change due to freshly applied reed wax gradually hardening off over a course of a few weeks. This can change the rigidity of the reed plate and reed block coupling, which again can cause small changes in pitch and/or timbre, usually barely noticable, but it does occur. People usually report something to the effect that after a few weeks or months of playing, their instrument sounds brighter and really begins to 'sing' nicely.