Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What's wrong with my note?? (In which I demonstrate my newbieness..)  (Read 3781 times)

0 Members and 1 Guest are viewing this topic.

Selam

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 105

Forgive me for not knowing much of the technical stuff here but one of my notes (high D on the G row) only has one bit to it...  :-\ I'm guessing this is something to do with it being a two voice box and only one of the reeds working (if that is right, then it's only stuff I've picked up from reading the threads on here.... )

What do I do?

Thank you!
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #1 on: October 16, 2009, 07:10:37 AM »

If there is only one reed sounding (your getting a very pure note as opposed to the normal warble of two) it is probably something to do with the reed.

Your first port of call is playing that note really hard to see if you can get it to sound. It might be that there is some dirt or sawdust from when the box was made stuck under the reed and you might be lucky and dislodge it by playing the note.

If you find that when you play hard both notes do come out it could be that the reed tongue is mis-aligned - if this is the case we can probably talk you through pushing it further down if your feeling brave.

If there is still only the single reed working its time to open your box and have a look, or send it to someone who knows what their are doing. 
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #2 on: October 16, 2009, 08:39:24 AM »

Yes, try to make the second reed sound applying different pressures (weeker and stronger). If this doesn't help and you don't want to open the box yourself (you have a w86, don't you?), you can visit the nearest accordion shop in your town. Shouldn't be a big problem.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #3 on: October 16, 2009, 08:46:04 AM »

Come on Selam it's time to be brave and get your pliers/screwdriver out and take you box apart. Everyone should be able to take the bellows off, reed blocks out, inspect the action etc to fix these sort of problems which can arise at unfortunate times.

Nothing focuses the mind more tha having your box in bits 15 mins before a dance starts. I know we all carry a spare box (or three) but if it's your favourite and just needs brisk TLC.....

Selam

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 105
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #4 on: October 16, 2009, 08:58:28 AM »

Thanks for the advice - I had a quick go at trying to make it sound although there's only so much strength I have at that time of morning! I'll have another try tonight.

Lester - agreed I should be able to take the thing apart (I can disassemble and reassemble my clarinet pretty quickly) but I have to say I can't even work out what needs to be undone on the box! Nothing looks takeapartable... What comes off first?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #5 on: October 16, 2009, 09:32:08 AM »

Selam,  has the problem just developed?  if so its most likely something stuck in one reed as LJC suggested.  If its always been like that it may be that that there is a tuning problem - both reeds exactly in unison.  Also how old is the box?  If you bought it recently, say within the past year, you should take it back to the shop for them to look at under warranty.

If you decide to fix it yourself then D is a push note so the reed is the outside of the reedblock.  First identify the D reedplate by counting from the end of the block, then look carefully at both D reeds, with a magnifying glass if possible.  You can learn a lot by close inspection before touching anything. You may be able to see something stuck under the edge of the reed tongue, if so just lift the tip of the reed a couple of mm with a small thin tool, and let it twang back into place.  That should clear it, and is a better method than sliding something under the reed which can jam the foreign body further up the gap rather than removing it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #6 on: October 16, 2009, 09:37:38 AM »

Lester - agreed I should be able to take the thing apart (I can disassemble and reassemble my clarinet pretty quickly) but I have to say I can't even work out what needs to be undone on the box! Nothing looks takeapartable... What comes off first?
Pull out the bellows pins - front and rear. They're indicated on the photo. Use end-cutter pliers, or a tack lifter. Keep the pins in order in case they're different lengths. Then pull the treble end away from the bellows.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #7 on: October 16, 2009, 09:45:24 AM »

Selam

Melodeons are like hand grenades you just pull out the pins and throw them as far as possible.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #8 on: October 16, 2009, 09:47:18 AM »

Forgive me for not knowing much of the technical stuff here but one of my notes (high D on the G row) only has one bit to it...  :-\ I'm guessing this is something to do with it being a two voice box and only one of the reeds working (if that is right, then it's only stuff I've picked up from reading the threads on here.... )

What do I do?
It does sometimes happen that a bit of dust, fluff - even a hair, lodges in the tiny gap between the steel reed tongue and the aluminium reed plate which the tongue is mounted on. It will be enough to stop the reed tongue vibrating properly.

As some have said, it can sometimes be freed by a bit of hard pushing or pulling on the offending reed, but often this fails to cure the problem and you have to open up the box.

Opening up your melodeon is not difficult, but you just need to take a bit of care.
Work in a good light on a table top covered with a soft towel or similar to avoid damage to the melodeon or the table.
1. Remove the bellows pins which secure the treble end to the bellows. There are usually 4, sometimes 6 of them, and will look like rounded nail heads protruding a little way from the surface of the wooden ends. You will need a pair of pliers to pull them out. They might be a bit stiff, but they will come out with a straight, vertical pull. It is a good idea to cover the rounded pin head with a scrap of fabric before closing the pliers on it; it helps avoids damaging the pin head and the side of the melodeon. Lay the pins down safe so they can't roll off anywhere and get lost. I like to make sure I know which pin comes from which hole, so I can return the correct pin to the correct hole on reassembly.

2. Once all the bellows pins are removed, the RH end should be able to be freed from the bellows. Again, it might be a bit stiff, but just gently ease it off. Lay the bellows and LH end safely to one side (inside the case is usually a good idea).

3. Inside the RH end, you should now be able to see the reed blocks and all the reeds. Take care not to bend any of the thin plastic or leather valves. The reed blocks are the two upstanding wooden structures on which the reeds are mounted. One reed block will be for the G row, the other for the D row. The reed tongues are the steel springy things set in the aluminium plates. Each note on your melodeon has two reeds on opposite sides of each reed block (that's why it is called a 2-voice instrument). And each reed plate contains two reeds, the visible one for the push notes and a hidden one underneath for the pull notes, the slot of which is covered by the leather or plastic valve.

4. You need to identify (a) which reed block is for the G-row - it will be the block which contains the overall shorter reeds, and (b) which reed plate is the one which is causing the problem. Count along the keyboard for the relevant button, and then count along the reed block to find the equivalent reed. You are fortunate in this case as your problem note is a push note and the reed tongue will be one of the visible ones rather than the one hidden underneath. Once you have found the correct position, there will be two reed plates for that particular note, on opposite sides of the reed block.

5. Having identified which number reed plate is the problem one, you may be able to see if there is any fluff or dirt in the gap, but on the other hand it may be too small and hidden to see. Gently flick or 'twang' the steel tongue using a fingernail or preferably a small wooden pointy thing like a cocktail stick. Do this to both reed tongues on opposite sides of the reed block. Usually this is sufficient to clear any dirt or debris.

6. In doing all this, take care not to bend any of the leather/plastic valves - they are rather delicate and easy to crease. And try to avoid touching the reed tongues with your fingers if possible - some people's sweat can be rather corrosive over time and may encourage rusting of the reed tongue. Resist the temptation to blow on to the reeds; moist breath can also be detrimental to the steel reeds.

7. Reassemble the melodeon and try it out to see if you've cured the problem. When reassembling the RH end to the bellows, make sure you have it on the correct way round and that the bellows are pushed firmly into the RH end, before you attempt to push the bellows pins back into place. Make sure the bellows pins are correctly aligned and perpendicular before trying to push them into place. They may be a bit stiff, but if everything is lined up properly, a firm push should do the trick. You can use a coin or thimble to protect your thumb when pushing the pins back in. Make sure the pins are fully pushed home.

If this hasn't cured the problem, repeat all the steps and try again. If it persistently fails to work it may be that something else is wrong in which case ask for more help.

All this may seem very daunting when written down but once you actually start doing it, the stages and descriptions should logically fall into place. Just go carefully and slowly and you'll be OK and also will learn a lot about how your melodeon works.  
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #9 on: October 16, 2009, 09:50:13 AM »

Use the biggest pair of pliers you can get your hands on - accidents happen when you use underpowered tools for a job. If your worried about scratches you can put a tea towel or something similar around the pin to stop yourself if your hand slips (but it shouldn't do, and anything just gets in the way really).

Once the treble end is off its usually a good idea to remove the straps which just flap about and get the in way (just undo the buckles). The lower of the two reed blocks will be the G block - if you take off the front grille (screws or possibly two twistable eyelets) you will be able to see which pallet corresponds with which reed making it easier to find the plate in question. Check both plates for dirt as it wont be obvious which one is playing and which one is not.

Steve got in first with a more comprehensive guide  :P

I always use the rubber hand grip of my pliers to push the pins back in - I've had metal objects skid off them before.
« Last Edit: October 16, 2009, 09:52:56 AM by LJC »
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #10 on: October 16, 2009, 01:25:30 PM »

Ref pulling bellows pins etc, I keep a pair of pliers with the jaws wrapped in a couple of layers of tape for such purposes. The tape needs replacing every so often, of course.
Logged

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: What's wrong with my note?? (In which I demonstrate my newbieness..)
« Reply #11 on: October 16, 2009, 06:20:55 PM »

Great info!

Thanks for asking the question, Selam. I have a similar problem - one of my reeds sounds slightly after the other on the D row F# (annoying) and I'm supposing it could be caused by similar things?  It does seem to happen on first push or just after pulling the G. I have tried soft and hard pushing but it doesn't go away - I'll now have a go at looking inside.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal