Hey, it's me again - the newbie with all of the questions. I've done a lot of online reading and video watching (Hot Rodding series among others) this past couple of weeks. I have an increased vocabulary and some understanding, too. Other than partially deconstructing and reassembling my squeeze box it has been to this point more academic than not. I've ordered a few odds and ends, including deed wax and some new leather valves.
One area that I need a lot more understanding in with the reeds. My Melodeon has some reeds that sound great, others that don't sound at all, and others that are really weak when compared to their counterpart. Those that sound great also have a reasonable tremolo. Several of the leather valves are turned up and a few are missing completely.
I don't have any kind of a tuning table (where bellows are used as a test bed for the wooden reed blocks). In lieu of that I have been using the source that God gave me, my lungs and lips. It is not the best solution but have have been able to replicate the problems that I identified when the instrument was assembled.
Questions:
- Other than damage, what causes a Reed to either stop sounding or sound poorly?
- Some of the Reed plates have a capital H stamped on them. Otherwise there are no identifying marks such as which notes are on that plate. What does the H mean? How does one know which notes are on a plate and how do you keep them identified if you are rewaxing the entire Reed block?
- What is the preferred adhesive is preferred for affixing the leather valves to the Reed plate, a water-based glue?
My first pass at refurbishing my instrument is to get it to the point where I can start learning how to play it. If I like playing it I will take it to the next level, either through my own attempts or paying someone to do it for me.
Thanks in advance for all of the great advice that I know I will receive. I've already read so much great info on this forum and I'm sure there is much more to come.