Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Colombian accordion tuner at work  (Read 1576 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Colombian accordion tuner at work
« on: March 03, 2022, 06:50:07 PM »

https://youtu.be/lHi9W0YxFTI

Cue: outraged forum members at his use of a rotary tool…
 (:)

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Colombian accordion tuner at work
« Reply #1 on: March 03, 2022, 07:38:02 PM »

I have to admit the sparks flying off the reeds makes me cringe… ;D
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Colombian accordion tuner at work
« Reply #2 on: March 03, 2022, 07:49:09 PM »

Without understanding his words it’s hard to tell exactly what he is trying to demonstrate.  It all looks a bit haphazard though.  Should get all the valves right first, then pre-tune if necessary,  then tune with the blocks inside the instrument.  And the grinder -  it’s so slow the way he does it.  Ok for a few reeds but adds a lot of time in a full retune.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Colombian accordion tuner at work
« Reply #3 on: March 03, 2022, 08:03:22 PM »

If you could file fast enough, you could possibly get some sparks going!

When I was building my bass instrument, I needed some reeds (on more or less normal sized plates) to go pretty low. I used some PA bass reeds, and after looking at some others, it was plainly obvious that they had been ground down using a rotary stone of some description.
In for a penny and in for a pound! I took a few down a long way, without having to overload them with solder, by carefully and neatly grinding away the lower portion of the reed tongue to about half it's thickness for about a third of its length. I had noticed a good number of original reeds which were done that way.

I've also seen a great number of original treble end reeds with rotary stone markings on them, when I've been using a file or a scratcher.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Colombian accordion tuner at work
« Reply #4 on: March 03, 2022, 08:51:55 PM »

Hohner reeds are tuned at the factory using a grinder.  Italian reeds not.

Why do you want to avoid loading reed tips with solder?  You can often get a better performing reed that way.  Thinning too much can exacerbate the tendency for the pitch to flatten when played hard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Colombian accordion tuner at work
« Reply #5 on: March 03, 2022, 09:13:05 PM »

Even older Italian reeds? I'm sure that some of the ones I'm talking about were out of old Italian PA's.

I didn't want to avoid using solder, it's just that they will only take a certain  amount before it all starts to fall off!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Colombian accordion tuner at work
« Reply #6 on: March 03, 2022, 10:35:17 PM »

Well it looks like a thriving business in Medellin (lots of Hohner three rows), so I guess however he does it, it works ok.

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Colombian accordion tuner at work
« Reply #7 on: April 08, 2022, 03:31:57 PM »

The sparks!  :o
Logged
Too many accordions, help!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal