Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Quiet Box  (Read 2061 times)

0 Members and 1 Guest are viewing this topic.

Chris Rayner

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 467
Re: Quiet Box
« Reply #20 on: November 07, 2022, 03:54:12 PM »

You can also get square hole drill bits now, that have a little shroud and cam a cutting tool around inside them.

Much cheaper, safer, and easier to use than a laser cutter, but, also a relatively modern gadget, at least in terms of being cheap and available.

https://www.amazon.co.uk/s?k=square+hole+drill+bit

Those are Mortising machine bits.  They are not that modern, the machine was invented in 1874.  You can’t just bung ‘em in your Black & Decker drill.  A cheapish new machine is £300-400.  I wouldn’t use it on anything less than 25mm thick; they’re pretty brutal.
Logged
Elderly amateur musician hoping to stave off dementia by learning to play the melodeon.  Main instrument a Tommy, also D/G and G/C pokerworks,  a single row 2 stop Hohner, and a new addition to the free reedery, a rather splendid Paolo Soprani four voice 120 bass c-system chromatic button accordion.  Very shiny, very loud, and about the same size and weight as a small car.  Now I’ve traded me Benny with (ahem) a cash adjustment, to a three voice 60 bass Castagnari K3.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Quiet Box
« Reply #21 on: November 07, 2022, 06:34:40 PM »

Nothing against rectangular holes and their discussion which seems to have taken over this thread, but I doubt very much this is the only issue with the OP's box. 

I have many old boxes with rectangular holes, some are loud and some are not.  The quiet ones often have brass reeds and are either budget models or made by lesser makers.
 
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Quiet Box
« Reply #22 on: November 07, 2022, 07:44:23 PM »

There is only so much you can do with these old boxes.  The raw materials just aren't there.  It is what it is, and should be enjoyed for what it is.  The OP has likely maxed out what can be done to get the most out of it.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Quiet Box
« Reply #23 on: November 07, 2022, 09:13:29 PM »

I have a quiet, muffled sounding box like this. Long zinc reedplates and brass tongues.
I'll fit individual plates with bright sounding steel reeds, possibly salvaged from PAs.
If it doesn't improve it, I will have an in-tune doorstop.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: Quiet Box
« Reply #24 on: November 16, 2022, 08:43:42 PM »

Thanks, all.

Yes, this has the long plate and brass tongues as well.

I'm happy with the box for what it is. It is nice to be able to play at home late at night and not really bother anyone.

At this point, I'm just curious as to what the factors that make such a quiet box. It's tight, the openings for the reeds appear to be normal sized, and the valves and wax are new and good. I'm assuming then, that the reeds are the issue.
Logged
Northern Appalachia Accordion
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal