If your latest project box is airtight, that is a good start, then you have the reeds and the action to consider. I would concentrate on the treble side for a start. The basses/chords and their action could be sorted later especially if your early project efforts yield good results.
If you already have 2 nice B/C boxes, you will know what you like in an instrument.
Lester’s “hot-ridding†videos are excellent and will guide you well.
There are plenty of threads/advice on here about reeds, tuning etc., but in my opinion, ‘playability’ of these smaller Hohners depends a lot upon their button action?
The Pallets will likely need re-facing, the lever spring action checking and equalising (and setting to your choice if you are very particular,) the preferred button height selecting, levelling and checking the buttons ensuring that they are central in their holes ...and fitting a well tailored backstop that restricts unnecessary travel equally on both rows. (With acknowledgement to those that players dislike a backstop.)
These kind of efforts should result in a nice fun box. Good luck!
P.s your Granny was posh, mine didn’t have any elastic in her knickers.
