Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Repairing a well played, but not well looked after, double ray  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

Pete The Squeeze

  • Member
  • *
  • Offline Offline
  • Posts: 20

After many years playing B/C double ray, and recently a D/G pokerwork. I have found a Double Ray to play with.
Firstly can a plastic fingerboard be fitted where a, blue painted, wooden one was?
Then the treble action has more elastic than my old granny’s under garments. I have studied Lester’s vid on this subject so I should bi ok…..to be continued!
Logged
B/C Double ray
D/G pokerwork
and More

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Repairing a well played, but not well looked after, double ray
« Reply #1 on: May 13, 2023, 01:38:04 PM »

If your latest project box is airtight, that is a good start, then you have the reeds and the action to consider. I would concentrate on the treble side for a start. The basses/chords and their action could be sorted later especially if your early project efforts yield good results.
If you already have 2 nice B/C boxes, you will know what you like in an instrument.
Lester’s “hot-ridding” videos are excellent and will guide you well.
There are plenty of threads/advice on here about reeds, tuning etc., but in my opinion,  ‘playability’ of these smaller Hohners depends a lot upon their button action?
The Pallets will likely need re-facing, the lever spring action checking and equalising (and setting to your choice if you are very particular,) the preferred button height selecting, levelling and checking the buttons ensuring that they are central in their holes ...and fitting a well tailored backstop that restricts unnecessary travel equally on both rows. (With acknowledgement to those that players dislike a backstop.)
These kind of efforts should result in a nice fun box. Good luck!
P.s your Granny was posh, mine didn’t have any elastic in her knickers.  (:)
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repairing a well played, but not well looked after, double ray
« Reply #2 on: May 14, 2023, 07:30:30 AM »

In answer to the question..yes you can usually get a plastic finger board from Charlie Marshall.
I know that pallet refacing is a popular thing to do around these parts, but I’d leave that as a tier two exercise. Get the box air tight and playing and in tune first..would be my advice..then muck about with pallet facings,new straps etc afterwards.

Pete The Squeeze

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: Repairing a well played, but not well looked after, double ray
« Reply #3 on: May 14, 2023, 10:07:55 AM »

Thanks Rog. I was thinking of getting a keyboard from Charlie Marshall and treble action springs and a few other things…. I work in leather ,as a hobby now, so no problem there. The box seemed airtight but I will re tape the bellows at some point. Thanks for the reply!
Logged
B/C Double ray
D/G pokerwork
and More

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repairing a well played, but not well looked after, double ray
« Reply #4 on: May 14, 2023, 11:08:48 AM »

You can make springs yourself (if you struggle to get some….) use piano wire bought from a piano supplier (see eBay). You need to work out the gauge.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal