I'm working on waxing long plates in a Galotta Sport 27. This was a compact instrument about the size of a Preciosa. The long plates are zinc and were originally held with wax alone. The reedblocks are glued to the fondo and cannot be safely removed. The main problem is air leakage between adjacent chambers in the reedblocks, causing ghost notes. Ordinarily I would consider fitting the blocks with neoprene or even candlewick gaskets, but the separators between the chambers are very thin -- there really isn't room to keep a gasket in place. My approach so far has been to brush liquid wax onto the separators (and the edges of the block), let it cool somewhat, and then use pliers to squeeze the long plates against the wax, creating a seal. (And then pin.) I've made a lot of progress; the seepage is now confined to just a few notes, but it seems it will take a few more tries to get it right.
There's gotta be a better way! (?)