Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Waxing long plates  (Read 596 times)

0 Members and 1 Guest are viewing this topic.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Waxing long plates
« on: May 23, 2023, 04:32:06 PM »

I'm working on waxing long plates in a Galotta Sport 27.  This was a compact instrument about the size of a Preciosa.  The long plates are zinc and were originally held with wax alone.  The reedblocks are glued to the fondo and cannot be safely removed.  The main problem is air leakage between adjacent chambers in the reedblocks, causing ghost notes.  Ordinarily I would consider fitting the blocks with neoprene or even candlewick gaskets, but the separators between the chambers are very thin -- there really isn't room to keep a gasket in place.  My approach so far has been to brush liquid wax onto the separators (and the edges of the block), let it cool somewhat, and then use pliers to squeeze the long plates against the wax, creating a seal.  (And then pin.)  I've made a lot of progress; the seepage is now confined to just a few notes, but it seems it will take a few more tries to get it right.

There's gotta be a better way!  (?)
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing long plates
« Reply #1 on: May 23, 2023, 04:35:26 PM »

Don’t wait for the wax to cool.  Place the wax then press the plate on not place as soon as possible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Waxing long plates
« Reply #2 on: May 23, 2023, 04:50:59 PM »

Thanks Theo.  It tends to cool very quickly because the lines of it are so thin.  I suppose I could carefully warm it with a hair dryer before pressing the plate.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxing long plates
« Reply #3 on: May 23, 2023, 06:35:05 PM »

Yes it does cool quickly, you can also gently warm the reed plate with the hairdryer
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal