Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: P Wyper Patent - 2 Stop - Restoration  (Read 2876 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
P Wyper Patent - 2 Stop - Restoration
« on: June 05, 2023, 06:52:33 PM »

Newly aquired P Wyper Patent 1 row - 2 stop in D
Tuning A435, American cloth straps, steel bellows corners, "Made in Saxony"... which I think dates it to period between 1915 and the creation of the Weimar republic.

It needs some work.

« Last Edit: June 25, 2023, 05:38:03 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #1 on: June 05, 2023, 06:58:57 PM »

Most glaring modification is replacement of one of the face screws with an M3  Philips Head machine screw.
So I will be needing looking for a 35mm long screw with a 3mm shank. I have a couple of recovered face screws from dead boxes, but they are longer.

The dummy stop is missing, unfortunately someone has prodded something down the hole damaging the end of the No.1 reed chamber and knocking the reed out. The reed is however there I have a repair strategy...or at least I think I do.

Apart from that .... some bi-metallic corrosion of pallet arms and pallet backings
« Last Edit: June 05, 2023, 07:03:36 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #2 on: June 22, 2023, 11:42:04 PM »

I managed to get the keyboard off last week. With thanks to Theo and others for advice on removing rusted in screws.
1) Good fitting screwdriver
2) Heat with soldering iron
This took several attempts over a couple of days.Regrinding a screwdriver to match the deep narrow slot in the screw heads proved neccessary

Keyboard and wooden action in photograph.
Springs to first and third treble buttons augmented/replaced by home made substitutes.
These may be safety pins.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #3 on: June 22, 2023, 11:48:02 PM »

Now onto pallet cleaning and renovation.
Beginning by removing all ten pallets from the pallet arms.

Screws loosened with aid of 25W soldering iron

How long to heat up?

In the end I applied the iron to the screw head nearest the keyboard for two timed minutes on each arm. At the end of this the palet casing was too hot to touch bomfortably and the pallet arm was hot to touch.

The pallet screws on this and similar Internationals (i.e. 1 row two stops) seem to be in two different sizes. The screw near to the keyboard is smaller in each case.

To avoid getting pallets turned upside down later (problematic owing to the limits of precision in manufacturing technology ofthe day) I have dotted the bottom end of each pallet with a silver pen before removal.
« Last Edit: June 23, 2023, 08:09:23 AM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #4 on: June 22, 2023, 11:52:56 PM »

Pallets off the action two days ago.

Yesterday and this evening finished removal of old leather from the pallet faces.

My leather removal technique is to try to pull up a bit of facing at a corner, then damp the leather at the edges (jar of water and ) and peel back bit by bit.

 >:E ///
« Last Edit: June 22, 2023, 11:58:58 PM by Peadar »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: P Wyper Patent - 2 Stop
« Reply #5 on: June 23, 2023, 01:44:27 PM »

I imagine that all of us who mess about with our instruments have slightly different techniques for the variety of jobs being done. I tend to just rip off the leathers and then scrape the remains with either a Stanley blade or a scalpel, whichever is closest to hand at the time. If it does the job, it's all good in my opinion.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #6 on: June 23, 2023, 04:32:59 PM »

I imagine that all of us who mess about with our instruments have slightly different techniques for the variety of jobs being done. I tend to just rip off the leathers and then scrape the remains with either a Stanley blade or a scalpel, whichever is closest to hand at the time. If it does the job, it's all good in my opinion.
That sounds more efficient than my method!
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: P Wyper Patent - 2 Stop
« Reply #7 on: June 23, 2023, 04:47:02 PM »

Then I have some 150 grip paper glued onto a piece of board and dress the surface of the pallet on that. Usually using a screwdriver pressing down  in the slot for the rod to pres3rve my fingertips.
A couple of passes and it's ready for new facings.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: P Wyper Patent - 2 Stop
« Reply #8 on: June 23, 2023, 11:14:29 PM »

"Usually using a screwdriver pressing down  in the slot for the rod to pres3rve my fingertips"

I seem to recall that the Hohner slot is the same size as an everyday hacksaw blade and a careful pass through, or two, clears the glue out.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #9 on: June 25, 2023, 05:59:44 PM »

Gents,

We seem to have a bit of thread drift here. The Project is restoration to playability of a one row example of a "Wyper Patent" Imternational.

This is a German Type, with open pallets, attached by screws to the pallet arms on the treble end and trap door basses in the Growl box.

The instrument as received was not in playable condition, has clearly had some "running repairs" and latterly some attempted repairs which have done more harm than good.

I am trying to effect a "best practice" restoration, following the basic rules of "conservation engineering" these include

1. So far as possible do like for like repairs.

2. Use original (or at least compatible with original) repair materials

3. If you have to make any modifications make them reversible.

My aim is to finish up with an instrument that plays like new -the "like new" of it's day, preserving the original tuning as far as possible.

 "Like New" in this case has a manufacturing window of 1915-1920.
 

Then I have some 150 grip paper glued onto a piece of board and dress the surface of the pallet on that. Usually using a screwdriver pressing down  in the slot for the rod to pres3rve my fingertips.
A couple of passes and it's ready for new facings.

"Usually using a screwdriver pressing down  in the slot for the rod to pres3rve my fingertips"

I seem to recall that the Hohner slot is the same size as an everyday hacksaw blade and a careful pass through, or two, clears the glue out.
[/quote
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop
« Reply #10 on: June 25, 2023, 06:08:37 PM »

Then I have some 150 grip paper glued onto a piece of board and dress the surface of the pallet on that. Usually using a screwdriver pressing down  in the slot for the rod to pres3rve my fingertips.
A couple of passes and it's ready for new facings.

Bit of a problem doing this with old "German Type" pallets - the thin sheet metal casing is secured to the wooden pallet by lips that turn over the pallet face.

There is also the possibility that in long storage the water content of the wood may have fallen to the extent that the pallet has shrunk hollowing it's face. I am not sure if this is me seeing something that isn't there.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #11 on: June 25, 2023, 06:46:16 PM »

 Pinched this quote (of Theo) from another thread.

"Black shellac polish applied with a rubber is good for adding a bit of shine to old worn black paintwork.  Follow up when thoroughly dry with burnishing cream, and then the lightest coating of wax polish."
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #12 on: June 25, 2023, 07:51:02 PM »

The pallets can be re-faced with thicker material than the original, felt and leather, instead of just leather.  That makes it much easier to get them airtight. It’s not original, but it is reversible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #13 on: June 25, 2023, 08:59:10 PM »

Quote
The pallets can be re-faced with thicker material than the original, felt and leather, instead of just leather.  That makes it much easier to get them airtight. It’s not original, but it is reversible.

This would require shimming (raising) the keyboard by the same amount to avoid changing the lever/pallet geometry and key height.  The other option is bending the lever to maintain key height and good pallet contact despite new thicker material.   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #14 on: June 25, 2023, 09:09:07 PM »

The levers are often bent out of shape on old Oppem pallet boxes, so adjusting them to suit thicker facings doesn’t really entail any additional work.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #15 on: June 28, 2023, 12:25:03 AM »

New pallet facings have had to step back a bit.....I remembered the excess of white corrosion powder on the sides of the pallets and have just spent the evening cleaning the metal backing/casing up.
In the end I used 600 grit wet a dry, damped with brasso on all of the pallets. A slow job. Took over two hours to clean ten pallets. Corrosion gone but some slight pitting remains visible.

I aim to give them all two coats of metal laquer before I stick the new facings on.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #16 on: June 28, 2023, 12:30:02 AM »

The levers are often bent out of shape on old Oppem pallet boxes, so adjusting them to suit thicker facings doesn’t really entail any additional work.
The biggest issue I have foiund with Internationals is loose keyboards...If the keyboard retaining screws aren't holding the keyboard tight to the fondo, it (the keyboard) rotates abut it's bottom edge away from the fondo changing the lever-arm geometry. and lifting the foot of the pallets off the fondo.
« Last Edit: July 22, 2023, 11:53:01 AM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #17 on: July 20, 2023, 10:28:09 PM »

Finally got the pallets screwed back on today....after cleaning up the corrosion coated pallet arms and giving them two coats of metal laquer.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #18 on: July 20, 2023, 10:40:12 PM »

When I got this instrument I found the First Reed under the dummy stop loose inside - the dummy stop or something else had at some point been rammed into the end of the reed chamber splintering the headstock.

It seems easy enough to make a replacement part - but getting the damaged piece out without damaging the fondp.

See below
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: P Wyper Patent - 2 Stop - Restoration
« Reply #19 on: July 20, 2023, 11:00:54 PM »

I've no doubt whatsoever that there will be a way to properly repair this without destroying the fondo, and someone will know exactly how to do it.
But, in the meantime, may I suggest that a narrow wood chisel or a sharpened screwdriver would shave most of the remainder of that chamber wall off the fondo. If you cannot get it smooth enough to make a good enough seal when gluing a nice little repair bit in place, you could always put the repair piece in with some wax. (if it's good enough to hold and seal reedplates in place, I'm sure it would hold a little bit of wood!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal