Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows repair  (Read 1866 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Bellows repair
« on: May 12, 2024, 09:00:49 PM »

I have a client from the far north (Arctic) that is only in town for a few days, and one of the corners of the bellows of their Hohner Erica is in need of repair.  As you can see from the photos, an attempt has been made by someone in the past to cover up the hole with tape.  I'm thinking the only way I could tackle this is to try and glue a piece of thin, flexible leather on the inside, covering the affected cardboard as well what's left of the original corner gusset.  Having never done a repair quite like what I'm suggesting before, I'm looking for any suggestions or input.  Many thanks.
« Last Edit: May 12, 2024, 09:02:38 PM by mselic »
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair
« Reply #1 on: May 12, 2024, 09:22:22 PM »

I’d repair it the same way.  In addition I might reinforce the split in cardboard before applying the leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Bellows repair
« Reply #2 on: May 12, 2024, 09:23:54 PM »

I had a corner gusset go next to a bellows end on one of my vintage boxes. The corner patches are glued to the outside of the bellows cardboard and then the bellows papers pasted over , followed by the corners being crimped on and finally the bellows tapes pasdted/glued over the external folds.

I finished up having to put a completely new corner patch on.

I softened the bellows tape glue either side of the failed patch, ten carefully peeled the bellows tapse back away frothe corner. dampened andto soften the bellows paper glue and attempted to peel the bellows paper back clear of the patch. Inevitably this part of the belows paper went to mush and i just cleaned it back clear of thecorner patch. Prised the crimped corner off --tip of a knife blade toopen out the crimped on metal corner...further dampening with a warm cloth softened the glue holding the patch in place and that peeled off the cardboard of the bellows. The cardboard having much more thickness than the bellows paper makes it possible to soften the gklue bond withoiut soaking the thickness of the cardboard.
after that, I glued on (hide glue, though gum arabic would probably serve just as well) a new leather corner patch, used a piece decotated wrapping paper to make good the bellows paper (near match to the original patterned bellows paper) , definitely gum arabic for the bellows paper. then it was corner back on and glue the tapes back over. I suspect that I trashed part of the bellows tapes and had to replace a top fold tape in its entirety  and cut back/patch over some of the others....that bit of detail I don't remember.

Hope this is of some help. Good luck whichever way you tackle it!





Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Bellows repair
« Reply #3 on: May 12, 2024, 09:58:08 PM »

I’m curious if that tape job comes off clean from the paper/ cloth. I have done similar repair with thin leather and it worked well for me.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Bellows repair
« Reply #4 on: May 13, 2024, 03:04:15 AM »

I’m curious if that tape job comes off clean from the paper/ cloth. I have done similar repair with thin leather and it worked well for me.

Yeah, I’m somewhat doubtful it will come off cleanly…
Logged
C#/D player

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Bellows repair
« Reply #5 on: May 13, 2024, 08:06:45 AM »

I’m curious if that tape job comes off clean from the paper/ cloth. I have done similar repair with thin leather and it worked well for me.
How it comes off depends very much on the original materials including the glues used at the different stages of manufacture of the bellows. eg tape may soften more than the glue in the one I did the leather was cracked and not repairable by patching - which had been my original intent
« Last Edit: May 13, 2024, 08:17:48 AM by Peadar »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal