The tone and clarity of the reeds will be impacted by the amount of pallet lift. The innermost bank of reeds (closest to the keyboard) with the least amount of lift won't come out as strong or clearly as the reeds with the largest amount of lift. Some builders of one-rows will often carve out a channel in the soundboard/fondo between the two innermost holes to try and mitigate some of that. To the degree that it becomes an issue all depends on the design of the instrument. Hohner HA114s, for example, have plenty of lift across all four banks of reeds, and the L bank of reeds is actually the innermost and comes through just fine. I also remember some examples of one-rows where the pallets were so close to the keyboard that the coil spring for the lever was actually connected the pallet itself, resulting in very little lift for that bank of reeds! The sound came through OK, but there was a noticeable difference in tone between the two M banks of reeds that were closest to the keyboard.
In answer to your question, I'd say as long as there is room inside and out, there's no reason you can't get away with just using a longer pallet in a standard setup. No need for a special cantilevered system, which does have an impact on the feel of the keyboard action.