Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 4-voice pallets?  (Read 986 times)

0 Members and 1 Guest are viewing this topic.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
4-voice pallets?
« on: June 09, 2024, 09:49:51 AM »

Hi all,

A question on accordions with very long pallets for 4-voice instruments. I know that pallet lift is very important, but with 4 voices on a single pallet, the pallet becomes so long that the amount of lift in a "fully raised" state will be very different for top voice & bottom voice.
Are there any special design considerations for 4-voice pallets vs, say, 3-voice ones? Is this why you sometimes see reverse-mounted pallets (hinged on a separate axle at the top of the soundboard)?

Let's say you had a 3-voice project box, and there was space to install 4 voices - can you just use the same mechs with longer pallets and add an extra bank of reeds at the top & the bottom (the soundboard & the insides will obviously need to be re-done)?

Thank you.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: 4-voice pallets?
« Reply #1 on: June 09, 2024, 10:22:20 AM »


   There are. Frans vd Aa had a multi element cantilever set up for his pallets that he reckoned allowed equal air into anterior holes compared to those nearer the player's chest.

   But that probably isn't the right criterion for a 4-voice 1-row. The larger reads will inevitably consume more airflow than the smaller ones …2 octaves higher in pitch.  And there are also appropriate pressure differences across the reed plates, and the dynamics as a pallet is opened to be considered. I suspect that theory doesn't get too much further than that. ie it's the "art of the possible". 

   A well configured 1-row instrument is certainly a pleasure to play … 🙂
Logged
  _       _    _      _ 

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 4-voice pallets?
« Reply #2 on: June 09, 2024, 11:11:23 AM »

I didn't have much choice while I was making up the 6 voice box. I used what was lying around.
In practice, I don't think it makes a lot of difference other than the pallet lift at the free end is considerably greater than necessary. For me this has more influence on the box design than the sound.
I can't fit a grille cover but I might try to fit a bar across to protect the vulnerable tips of the pallets.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: 4-voice pallets?
« Reply #3 on: June 09, 2024, 01:42:53 PM »



Let's say you had a 3-voice project box, and there was space to install 4 voices - can you just use the same mechs with longer pallets and add an extra bank of reeds at the top & the bottom (the soundboard & the insides will obviously need to be re-done)?

Thank you.

Possibly easier to start with a two voice....at least if you are going to re-engineer a Hohner.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 4-voice pallets?
« Reply #4 on: June 09, 2024, 07:38:35 PM »

The tone and clarity of the reeds will be impacted by the amount of pallet lift.  The innermost bank of reeds (closest to the keyboard) with the least amount of lift won't come out as strong or clearly as the reeds with the largest amount of lift. Some builders of one-rows will often carve out a channel in the soundboard/fondo between the two innermost holes to try and mitigate some of that.  To the degree that it becomes an issue all depends on the design of the instrument.  Hohner HA114s, for example, have plenty of lift across all four banks of reeds, and the L bank of reeds is actually the innermost and comes through just fine.  I also remember some examples of one-rows where the pallets were so close to the keyboard that the coil spring for the lever was actually connected the pallet itself, resulting in very little lift for that bank of reeds! The sound came through OK, but there was a noticeable difference in tone between the two M banks of reeds that were closest to the keyboard.

In answer to your question, I'd say as long as there is room inside and out, there's no reason you can't get away with just using a longer pallet in a standard setup.  No need for a special cantilevered system, which does have an impact on the feel of the keyboard action.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal