I'm in the process of restoring this vintage Paolo Soprani box and am looking to improve the function of this air button. Currently it works quite poorly, and looks like it always must have done so. It's a lever-type button but it presses down on an arm that should, ideally, actually be moving laterally (towards the left in the photo) rather than straight up and down as pressing the lever-button is trying to make it do. I'd rather not rip out the entire mechanism and build new since I currently don't have the mechanical components to do so. I've been considering bending the lever arm that the button presses against at more of an angle, and then maybe gluing an angled block on the bottom of the current lever-button that, in theory, would help move the lever arm/opening the air valve more smoothly (since the action needs to be pushing the arm/lever laterally to one side in order to open the air valve). Open to suggestions!